Fiber Optic Cable Aerospace Cables SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 Features: • Extremely light weight • Small outer diameter • Stabilized ETFE Jacket Applications: • Airplane networks and aerospace controls • Extreme temperature environments • Non out-gassing requirements ADC’s aerospace cables provide factory standard guaranteed performance specifications. They are 100% optically tested and are offered with a variety of optical performance levels. 10/05 • 101465 Aerospace Cables Fiber Optic Cable Aerospace Cables 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Environmental Characteristics: Storage Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F) Operating Temperature -40˚ to 70 ˚C (-40˚ to 158 ˚F) Installation Temperature -20˚ to 70 ˚C (-4˚ to 158 ˚F) Specifications Mechanical Characteristics: Test Procedure Units Results Crush Resistance EIA-FOTP-41A N/cm 900 Impact Resistance EIA-FOTP-25B # of impacts 100 Flexing (# of Cycles) EIA-FOTP-104A # of cycles 1,000 Maximum Pulling Load EIA-FOTP-33A N (lb) 400 (90) Maximum Operating Load EIA-FOTP-33A N (lb) 100 (22) Maximum Vertical Rise EIA-FOTP-33A m (ft) 100 (328) Min. Bend Radius @ Max Load EIA-FOTP-33A cm (in) 5 (2) Simplex Fiber Cable Modified ETFE Outer Jacket 900 µm PVDF or Polyester Tight Buffer Aramid Yarn Strength Member 245 µm or 500 µm Acrylate or Silicone Coated Fiber 10/05 • 101465 Aerospace Cables Fiber Optic Cable Aerospace Cables 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Construction Characteristics: Strand Count Cable Diameter mm in Simplex 2.4 0.095 Optical Performance: Multimode Fiber Maximum Attenuation @ 850/1300 nm Typical Attenuation @ 850/1300 nm Minimum Bandwidth @ 850/1300 nm Core Diameter (µm) Clad Diameter (µm) Coat Diameter (µm) Numerical Aperture 50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015 62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015 100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020 200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020 Singlemode Fiber @ 1310/1550 nm @ 1310/1550 nm Mode Field Diameter (µm) @ 1310 nm @ 1550 nm 1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 101465 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET Ordering Information Description Diameter Catalog Number* mm in Simplex with Polyester Tight Buffer 2.95 0.116 0001BOESFH XXX 24HYTB Simplex with PVDF Tight Buffer 2.95 0.116 9001BOESFH XXX 24 *Replace XXX with Fiber Type below: XXX = Fiber Type 010 = Singlemode 050 = 50/125/500 µm Multimode 062 = 62.5/125/245 µm Multimode 100 = 100/140/500 µm Multimode . 100% optically tested and are offered with a variety of optical performance levels. 10/05 • 101465 Aerospace Cables Fiber Optic Cable Aerospace Cables. 101465 Aerospace Cables Fiber Optic Cable Aerospace Cables 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Construction Characteristics: Strand Count Cable