OUTSIDE SCREW & YOKE GATE VALVES Resilient Wedge OS&Y Gate Valve / Model OSY-300FF Size Working Pressure Max Test Pressure Working Temperature Connection Specifications Corrosion Protection Features : 2”, ½”, 3”, 4”, 5”, 6”, 8”, 10”, 12” : 20,7 bar (300psi) : 41,4 bar (600psi) : - 80°C : Flange diameter and thickness according to ANSI B16.1 Class 125, EN1092-2 PN10 or EN1092-2 PN16 : Design and dimensions conform to AWWA C515 : Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface : Pre-notched, stainless steel stem for easy attachment of supervisory switch 47 OUTSIDE SCREW & YOKE GATE VALVES Material List No Part Material ASTM Specification Valve Body Ductile Iron ASTM A536, 65-45-12 10 11 12 13 14 15 16 17 18 Wedge Disc Stem Bonnet Gasket Bonnet Stem Packing Yoke Stem Bushing Gland Stem Nut Handwheel Washer Gland Nut Stud Flat Washer Nut O-Ring Plug Ductile Iron Stainless Steel EPDM Ductile Iron EPDM Ductile Iron Brass Ductile Iron Brass Ductile Iron Brass Carbon Steel Carbon Steel Carbon Steel Carbon Steel EPDM Bronze ASTM A536, 65-45-12 & EPDM AISI 420 Commercial ASTM A536, 65-45-12 Commercial ASTM A536, 65-45-12 HPb59-1 ASTM A536, 65-45-12 HPb59-1 ASTM A536, 65-45-12 HPb59-1 Zinch Plated Zinch Plated Zinch Plated Zinch Plated Commercial ASTM B583 C89833 Dimensions - Weights SIZE DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 2" 1/2" 3" 4" 5" 6" 8" 10" 12" A 178 190 203 229 254 267 292 330 356 B 348 373 408 471 541 601 774 939 1065 DIMENSIONS (mm) C N-M 400 152 440 175 490 191 573 229 665 254 755 279 975 343 1193 406 1370 483 L ØD1 16 17,5 19,1 19,1 19,1 19,1 22,2 23,8 25,4 PN10/16 ANSI 150 170 180 190 200 210 230 250 270 178 190 203 229 254 267 292 330 356 DIMENSIONS (mm) SIZE DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 2" 1/2" 3" 4" 5" 6" 8" 10" 12" ANSI 120,7 139,7 152,4 190,5 215,9 241,3 298,5 362 431,8 D1 PN16 PN10 125 145 160 180 210 240 295 355 410 350 400 ANSI 4-Ø19,1 8-Ø19,1 8-Ø22.2 8-Ø22.2 8-Ø22.2 12-Ø25,4 12-Ø25,4 n-ØL PN16 PN10 4-Ø19,1 4-Ø19,1 8-Ø19,1 8-Ø19,1 8-Ø19,1 8-Ø23 12-Ø23 8-Ø23 12-Ø28 12-Ø23 12-Ø28 12-Ø23 WEIGHTS (kg) 14,7 17,7 23,1 31,6 42,2 53,2 91,3 134,6 200 Note : Size 5” is only UL listed Valve flange drilling (size and location of holes) allows mating with the following flange types: ANSI= ANSI B16.1 Class 125 PN16=DIN 2501, EN 1092 - PN16, BS 4504 PN10=DIN 2501, EN 1092 - PN10, BS 4504 48