Ứng dụng bộ phần mềm GEMPACK trong phân tích và xây dựng các kịch bản cho huyện mỏ cày, bến tre

21 492 0
Ứng dụng bộ phần mềm GEMPACK trong phân tích và xây dựng các kịch bản cho huyện mỏ cày, bến tre

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Using GEMPACK software to analyse and build scenarios for the economy of Mo Cay, Ben Tre, Viet Nam Ứng dụng phần mềm GEMPACK phân tích xây dựng kịch cho huyện Mỏ Cày, Bến Tre Scott H Murray & Tài H Pham Discipline of Statistics and Mathematics Seminar at Hoa Sen University August 2014 Contents Describing CGE (Computable General Equilibrium) and I-O (Input Output) models Mô tả mô hình CGE (tính toán cân tổng thể) I-O (Vào-Ra) Describing the I-O model of Mo Cay district, Ben Tre Province, Viet Nam 2000 Mô tả mô hình I-O huyện Mỏ Cày, Bến Tre Describing GEMPACK software (General Equilibrium Modeling Package) Mô tả phần mềm GEMPACK (Cân tổng thể trọn gói) Describing how simulations are carried out in GEMPACK Mô tả mô thực GEMPACK What are CGE and I/O models ?  A Computable General Equilibrium (CGE) model describes a wide range of economic behaviors These behaviors are modeled through building a very flexible system of equations Mô hình cân tổng thể CGE mô tả hành vi kinh tế chúng mô hình hóa thông qua việc xây dựng hệ thống phương trình  Input-output (I-O) Model is also a system of equations of economic behaviors Tương tự, mô hình I-O hệ thống phương trình hành vi kinh tế  The fundamental difference between them is that while a CGE is based on market equilibrium conditions, I-O model is based on technical input output relationship Sự khác biệt hai mô hình là: mô hình CGE dựa điều kiện cân thị trường, mô hình I-O dựa mối quan hệ kỹ thuật đầu vào đầu Why to use a CGE and I/O model? Why to use a CGE and I/O model?  The quantitative results are clear and exact Kết định lượng rõ ràng xác  It may be too complex if using algebraic or geometric methods Quá phức tạp sử dụng phương pháp đại số hình học  It is based on explicit assumptions Dựa giả định rõ ràng  It may generate good ideas about the role of certain assumptions Có thể cho ý tưởng tốt vai trò giả định Why to use a CGE and I/O model? Why to use a I/O model?  Countries have a non - market economy (NME) Các quốc gia có kinh tế phi thị trường  The data is shortage and incorrect Dữ liệu thiếu không xác What is the I/O model at Mo Cay district, Ben Tre Province, Viet Nam ?  It recognizes 41 sectors and each sector producing a single commodity mô hình có 41 ngành sản phẩm  Three final demands are households, government and investment Cầu cuối hộ gia đình, Chính phủ đầu tư  Two primary factors are labour and capital Yếu tố sản xuất lao động vốn What is the I/O model at Mo Cay district, Ben Tre Province, Viet Nam ?  There are differences between incoming and outgoing goods Có khác biệt sản phẩm vào khỏi huyện  Output of each sector is a Cobb- Douglas aggregate of labour, capital and intermediate inputs Xuất lượng ngành hàm Cobb-Douglas theo biến lao động, vốn nhập lượng trung gian  Final demands are also Cobb Douglas Cầu cuối hàm Cobb-Douglas What is the GEMPACK software ?  GEMPACK (General Equilibrium Modeling Package) is a suite of economic modeling software designed for building and solving applied CGE or I-O models GEMPACK phần mềm mô hình kinh tế thiết kế để xây dựng giải mô hình CGE I-O  It can handle a wide range of economic behaviors through a system of the equations Có thể xử lý loạt hành vi kinh tế thông qua hệ thống phương trình (hàng nghìn phương trình)  These equations can be written as linear or nonlinear equations or a mix of these two Những phương trình phương trình tuyến tính, phi tuyến kết hợp hai What is the data of the I/O model ?  The data for a model consists of input-output data (giving dong values) and parameters Dữ liệu mô hình bao gồm: liệu đầu vào- đầu tham số  The data given are usually sufficient to read off an initial solution to the equations Các liệu phải đủ lời giải ban đầu  The data consist of : • DVCOMIN(i,j) Intermediate inputs – nhập lượng trung gian • DVHOUS(i) Household consumption - tiêu dùng hộ • DVFACIN(f,j) Factor use by industry – sử dụng yếu tố sản xuất  Then, if we set all the prices to one for • PC(i) Price of commodities - giá hàng hóa • PF(f) Price of factors - giá yếu tố Describing how simulation are carried out by GEMPACK There are three steps to carry out a simulation using GEMPACK : Ba bước để thực mô GEMPACK: • Step 1: Implementing & simulation Triển khai thực thi & mô • Step 2: Solving the system of equations Giải hệ phương trình • Step 3: Analysing the results Phân tích kết 10 Step : Implementing the model A CGE model is implemented in GEMPACK when: The data are assembled (Mocay.HAR - Header Array) Dữ liệu tập hợp (Mocay.HAR-tiêu đề mảng) The equations are written by Fortran language (Mocay TAB - TABLO) Phương trình viết ngôn ngữ fortran The scenarios are written by Fortran language (Mocay.CMF- Comand File) Các kịch viết ngôn ngữ fortran 11 Step : Implementing the model Step 1.1: Create file Mocay.HAR in ViewHAR program Tạo tập tin Mocay.HAR phần mềm ViewHAR Step 1.2: Create Mocay.TAB in TABmate program Tạo tập tin Mocay.TAB phần mềm TABmate Step 1.3: Create Mocay.CMF in TABmate program Tạo tập tin Mocay.CMF phần mềm TABmate Step 1.4: Implementing the model triển khai thực thi mô hình 12 Step : Solve the equation of the model Step 2.1: Solve the equations of the model Giải hệ phương trình select simulation /GEMSIM /Select file Mocay CMF Step 2.2: View the result (press Go to View SOL) Giải phương trình mô hình 13 Step : Analysing the results Step 3.1: The shocks for the simulation Những chấn động cho mô Step 3.2: Real GDP (Gross Domestic Product) in the model Tổng sản phẩm quốc nội thực tế mô hình Step 3.3: Real GDP from the income side (supply of add value) GDP thực tế từ phía thu nhập Step 3.4: Real GDP from the expenditure side (Final demand) GDP thực tế từ chi ngân sách Step 3.5: Real GDP from the production side (production supply).- GDP thực tế từ sản xuất Step 3.6: Demand for factors in each sector Nhu cầu nhân tố ngành 14 Step : Analyzing the results Step 3.7: The prices of labor and capital Giá lao động vốn Step 3.8: The prices of commodity - Giá hàng hóa Step 3.9: Demand for factors in each sector Nhu cầu nhân tố ngành Step 3.10: Household demand for the commodities Nhu cầu hộ gia đình hàng hóa Step 3.11: Total final demand for the commodities Tổng nhu cầu hàng hóa Step 3.12: Results for factor prices Kết giá trị nhân tố 15 Comparing between GEMPACK and Excel • While GEMPACK software is convenient for both linear, nonlinear and mix, Excel software is only convenient for linear equations Trong GEMPACK thuận lợi cho tuyến tính, phi tuyến tính hỗn hợp, Excel thuận lợi cho tuyến tính • GEMPACK is convenient for analysing the results and building scenarios Otherwise, It is too difficult using by Excel GEMPACK thuận lợi cho việc phân tích kết xây dựng kịch Điều khó sử dụng Excel • GEMPACK can solve more equations than EXCEL GEMPACK giải nhiều phương trình Excel • GEMPACK is not as popular as EXCEL GEMPACK không phổ biến Excel 16 Comparing the model of Mocay and the model of FTA The system of equations - Hệ phương trình The primary factors - Nhân tố The environment of the scenarios Môi trường kịch 17 The model of Mocay and the model of FTR Australia & Viet Nam The primary factors - Nhân tố chính:  The model I/O of Mocay is emphasized to increase labor from local (unemployment) Mô hình I/O Mỏ cày nhấn mạnh việc tăng lao động từ địa phương (thất nghiệp)  The Model I/O of FTR is emphasized not only labor, capital from Australia but also tariff system to reduce the price of intermediate input Mô hình I/O FTR nhấn mạnh không lao động, vốn từ Úc mà hệ thống thuế để giảm giá đầu vào trung gian 18 The model of Mocay and the model of FTA – Australia & Viet Nam  Association of Southeast Asia Nations (ASEAN) are entering into force the free trade agreements (FTAs): Hiệp hội quốc gia Đông Nam Á (Asean) bước vào hiệu lực Hiệp định thương mại tự (FTA): •ASEAN-China Free Trade Agreement (ACFTA-1/7/2005) •ASEAN-Korea Free Trade Agreement (AKFTA-1/6/2007) •Agreement On Comprehensive Economic Partnership Among Japan And Member States Of The Association Of South East Asian Nations (AJCEP-1/12/2008) •ASEAN-India Free Trade Agreement (AIFTA-1/1/2010) • ASEAN-Australia-New Zealand Free Trade Agreement (AANZFTA-1/1/2010) 19 The model of Mocay and the model of FTA – Australia & Viet Nam  The formation of the ASEAN Economic community (AEC) by 2015 Sự hình thành cộng đồng kinh tế Asean (AEC) năm 2015  Viet Nam, Singapore and Malaysia are negotiating to sign up the Trans-Pacific Partnership (TTP) in 2013 Việt Nam, Singapore Malaysia đàm phán để đăng ký quan hệ đối tác xuyên Thái Bình Dương (TTP) năm 2013  Free Trade Agreement of Viet Nam - China and Viet Nam - USA Hiệp định thương mại tự Việt Nam - Trung Hoa Việt Nam - Mỹ 20 Conclusion 21 [...]... analysing the results and building scenarios Otherwise, It is too difficult using by Excel GEMPACK thuận lợi cho việc phân tích kết quả và xây dựng kịch bản Điều này quá khó khi sử dụng Excel • GEMPACK can solve more equations than EXCEL GEMPACK giải quyết nhiều phương trình hơn Excel • GEMPACK is not as popular as EXCEL GEMPACK không phổ biến như Excel 16 Comparing the model of Mocay and the model of FTA... hóa Step 3.12: Results for factor prices Kết quả giá trị các nhân tố 15 Comparing between GEMPACK and Excel • While GEMPACK software is convenient for both linear, nonlinear and mix, Excel software is only convenient for linear equations Trong khi GEMPACK thuận lợi cho cả tuyến tính, phi tuyến tính và hỗn hợp, Excel chỉ thuận lợi cho tuyến tính • GEMPACK is convenient for analysing the results and building... Step 1 : Implementing the model Step 1.1: Create file Mocay.HAR in ViewHAR program Tạo tập tin Mocay.HAR trong phần mềm ViewHAR Step 1.2: Create Mocay.TAB in TABmate program Tạo tập tin Mocay.TAB trong phần mềm TABmate Step 1.3: Create Mocay.CMF in TABmate program Tạo tập tin Mocay.CMF trong phần mềm TABmate Step 1.4: Implementing the model triển khai thực thi mô hình 12 Step 2 : Solve the equation... supply).- GDP thực tế từ sản xuất Step 3.6: Demand for factors in each sector Nhu cầu các nhân tố trong từng ngành 14 Step 3 : Analyzing the results Step 3.7: The prices of labor and capital Giá lao động và vốn Step 3.8: The prices of commodity - Giá hàng hóa Step 3.9: Demand for factors in each sector Nhu cầu các nhân tố trong từng ngành Step 3.10: Household demand for the commodities Nhu cầu hộ gia đình... primary factors - Nhân tố chính The environment of the scenarios Môi trường của các kịch bản 17 The model of Mocay and the model of FTR Australia & Viet Nam The primary factors - Nhân tố chính:  The model I/O of Mocay is emphasized to increase labor from local (unemployment) Mô hình I/O của Mỏ cày nhấn mạnh việc tăng lao động từ các địa phương (thất nghiệp)  The Model I/O of FTR is emphasized not only... Implementing the model A CGE model is implemented in GEMPACK when: The data are assembled (Mocay.HAR - Header Array) Dữ liệu được tập hợp (Mocay.HAR-tiêu đề mảng) The equations are written by Fortran language (Mocay TAB - TABLO) Phương trình được viết bởi ngôn ngữ fortran The scenarios are written by Fortran language (Mocay.CMF- Comand File) Các kịch bản được viết bởi ngôn ngữ fortran 11 Step 1 : Implementing... simulation /GEMSIM /Select file Mocay CMF Step 2.2: View the result (press Go to View SOL) Giải các phương trình của mô hình 13 Step 3 : Analysing the results Step 3.1: The shocks for the simulation Những chấn động cho mô phỏng Step 3.2: Real GDP (Gross Domestic Product) in the model Tổng sản phẩm quốc nội thực tế trong mô hình Step 3.3: Real GDP from the income side (supply of add value) GDP thực tế từ... FTR nhấn mạnh không chỉ lao động, vốn từ Úc mà còn là hệ thống thuế để giảm giá đầu vào trung gian 18 The model of Mocay and the model of FTA – Australia & Viet Nam  Association of Southeast Asia Nations (ASEAN) are entering into force the free trade agreements (FTAs): Hiệp hội các quốc gia Đông Nam Á (Asean) đang bước vào hiệu lực của Hiệp định thương mại tự do (FTA): •ASEAN-China Free Trade Agreement... Malaysia are negotiating to sign up the Trans-Pacific Partnership (TTP) in 2013 Việt Nam, Singapore và Malaysia đang đàm phán để đăng ký quan hệ đối tác xuyên Thái Bình Dương (TTP) năm 2013  Free Trade Agreement of Viet Nam - China and Viet Nam - USA Hiệp định thương mại tự do Việt Nam - Trung Hoa và Việt Nam - Mỹ 20 Conclusion 21 ... lợi cho tuyến tính • GEMPACK is convenient for analysing the results and building scenarios Otherwise, It is too difficult using by Excel GEMPACK thuận lợi cho việc phân tích kết xây dựng kịch. .. (tính toán cân tổng thể) I-O (Vào-Ra) Describing the I-O model of Mo Cay district, Ben Tre Province, Viet Nam 2000 Mô tả mô hình I-O huyện Mỏ Cày, Bến Tre Describing GEMPACK software (General Equilibrium... the GEMPACK software ?  GEMPACK (General Equilibrium Modeling Package) is a suite of economic modeling software designed for building and solving applied CGE or I-O models GEMPACK phần mềm mô

Ngày đăng: 31/03/2016, 23:20

Từ khóa liên quan

Tài liệu cùng người dùng

Tài liệu liên quan