Module TCP/IP Protocol and IP Addressing Version 3.0 History of TCP/IP • The U.S Department of Defense (DoD) created the TCP/IP reference model because it wanted a network that could survive any conditions • The TCP/IP model has since become the standard on which the Internet is based • In 1992 the standardization of a new generation of IP, often called IPng, was supported by the Internet Engineering Task Force (IETF) IPng is now known as IPv6 Version 3.0 TCP/IP Model The TCP/IP model has four layers: The Application layer, Transport layer, Internet layer, and Network Access layer Version 3.0 Application Layer • The application layer of the TCP/IP model handles high-level protocols, issues of representation, encoding, and dialog control • The Application layer of the TCP/IP model has protocols to support file transfer, e-mail, and remote login, and many other applications Version 3.0 Application Layer Version 3.0 Application Layer • • • • • • • File Transfer Protocol (FTP) Trivial File Transfer Protocol (TFTP) – TFTP is a connectionless service that uses the User Datagram Protocol (UDP) Network File System (NFS) – NFS is a distributed file system protocol suite developed by Sun Microsystems that allows file access to a remote storage device such as a hard disk across a network Simple Mail Transfer Protocol (SMTP) – SMTP administers the transmission of e-mail over computer networks Terminal emulation (Telnet) – Telnet provides the capability to remotely access another computer Simple Network Management Protocol (SNMP) – SNMP is a protocol that provides a way to monitor and control network devices, and to manage configurations, statistics collection, performance, and security Domain Name System (DNS) – DNS is a system used on the Internet for translating names of domains and their publicly advertised network nodes into IP addresses Version 3.0 Transport Layer • The transport layer provides transport services from the source host to the destination host • The transport layer constitutes a logical connection between the endpoints of the network, the sending host and the receiving host • End-to-end control is the primary duty of the transport layer when using TCP Version 3.0 Transport Layer Version 3.0 Transport Layer Transport services include all the following services: • TCP and UDP – Segmenting upper-layer application data – Sending segments from one end device to another end device • TCP only – Establishing end-to-end operations – Flow control provided by sliding windows – Reliability provided by sequence numbers and acknowledgments Version 3.0 Internet Layer • The purpose of the Internet layer is to select the best path through the network for packets to travel • The main protocol that functions at this layer is the Internet Protocol (IP) Version 3.0 10 IPv4 Addresses • An IP address is a 32-bit sequence of 1s and 0s • Every IP address has two parts – The network portion – The host portion • An IP address is an hierarchical address • IP addresses are divided into classes to define the large, medium, and small networks – Class A – Class B – Class C Version 3.0 16 IP Classes of Addresses Version 3.0 17 Version 3.0 18 Reserved IP Addresses • Certain host addresses are reserved and cannot be assigned to devices on a network – Network address – Used to identify the network itself – Broadcast address – Used for broadcasting packets to all the devices on a network Version 3.0 19 Private Addresses • With the rapid growth of the Internet, public IP addresses were beginning to run out • Solutions to expand the number of IP addresses available for public use include: – classless interdomain routing (CIDR) – IPv6 – Private IP addresses Version 3.0 20 Private Addresses • Internet requires translation of the private addresses to public addresses • This translation process is referred to as Network Address Translation (NAT) Version 3.0 21 Subnetting • To create a subnet address, a network administrator borrows bits from the host field and designates them as the subnet field • The minimum number of bits that can be borrowed is two • The maximum number of bits that can be borrowed can be any number that leaves at least two bits remaining, for the host number Version 3.0 22 IPv4 and IPv6 • IPv6 uses 128 bits rather than the 32 bits • Provides 640 sextrillion addresses • IPv6 addresses are 128 bits long, written in hexadecimal form, and separated by colons IPv6 fields are 16 bits long Version 3.0 23 Assigning IP Addresses • Network administrators use two methods to assign IP addresses – Static • Administratively assigned – Dynamic • Automatically assigned Version 3.0 24 Static IP Addresses • Static assignment works best on small, infrequently changing networks • Good recordkeeping is critical to prevent problems which occur with duplicate IP addresses • Servers should be assigned a static IP address so workstations and other devices will always know how to access needed services • Other devices that should be assigned static IP addresses are network printers, application servers, and routers Version 3.0 25 RARP • Reverse Address Resolution Protocol (RARP) associates a known MAC addresses with an IP addresses • A network device, such as a diskless workstation, might know its MAC address but not its IP address RARP allows the device to make a request to learn its IP address • Devices using RARP require that a RARP server be present on the network to answer RARP requests Version 3.0 26 BOOTP • The bootstrap protocol (BOOTP) operates in a client-server environment • BOOTP packets can include the IP address, as well as the address of a router, the address of a server, and vendorspecific information • One problem with BOOTP is that it was not designed to provide dynamic address assignment • With BOOTP, a network administrator manually creates a configuration file for every host on the network that contains a BOOTP profile along with an IP address assignment in it Version 3.0 27 DHCP • Dynamic host configuration protocol (DHCP) is the successor to BOOTP • Unlike BOOTP, DHCP allows a host to obtain an IP address dynamically without the network administrator having to set up an individual profile for each device • A range of IP addresses must be set-up on a DHCP server • As hosts come online, they contact the DHCP server and request an address The DHCP server chooses an address and leases it to that host • The major advantage that DHCP has over BOOTP is that it allows users to be mobile Version 3.0 28 ARP • Address Resolution Protocol (ARP) – Automatically maps IP to unknown MAC address • For TCP/IP communications, a datagram on a local-area network must contain both a destination MAC address and a destination IP address These addresses must be correct and match the destination MAC and IP addresses of the host device • For communications between two LAN segments TCP/IP has a variation on ARP called Proxy ARP that will provide the MAC address of an intermediate device for transmission outside the LAN to another network segment Version 3.0 29 ARP •Some devices will keep tables that contain MAC addresses and IP addresses of other devices that are connected to the same LAN •These are called Address Resolution Protocol (ARP) tables •ARP tables are stored in RAM memory, where the cached information is maintained automatically on each of the devices Version 3.0 30 ... 19 92 the standardization of a new generation of IP, often called IPng, was supported by the Internet Engineering Task Force (IETF) IPng is now known as IPv6 Version 3.0 TCP /IP Model The TCP /IP. .. Internet Protocol (IP) Version 3.0 10 Internet Layer The following protocols operate at the TCP /IP Internet layer: • IP provides connectionless, best-effort delivery routing of packets IP is not... 22 IPv4 and IPv6 • IPv6 uses 12 8 bits rather than the 32 bits • Provides 640 sextrillion addresses • IPv6 addresses are 12 8 bits long, written in hexadecimal form, and separated by colons IPv6