Thông tin tài liệu
Competitiveness of the
European Graphic
Industry
Prospects for the EU printing
sector to respond to its
structural and technological
challenges
2007
©EuropeanCommunities, 2007
2
This report has been producedby E&Y as part of the projectfinancedby the EuropeanCommission
(Enterprise and IndustryDirectorate-General). Itscontent thereforerepresentsE&Y’s ownviewson the
subjectmatter.
The viewsexpressedin thisreport, as wellas the information includedin it, do not necessarilyreflectthe
opinion or position of the EuropeanCommission and in no waycommit the institution.
For furtherinformation, contact
EuropeanCommission
Enterprise and IndustryDirectorate-General
Unit G4
B-1049 Brussels
Fax: (32-2) 29 69 638
E-mail: entr-textiles-fashion-forest-ind@ec.europa.eu
©European Communities, 2007
Reproduction is authorized provided the source is acknowledged
3
Contents
Summary of methodology and scope of the study
Proposition for an action plan dedicated to the European
Printing Industry
Structure of the plan
Detail of the actions
Summary of the analysis of the European Printing Industry
Printers’point of view
Strengths, Weaknesses, Opportunities, Threats analysis
5 Structural challenges for the European printing industry
Appendix
General context
Origin of pulp and paper
Comparison of financial ratios
Detailed analysis of the European printing industry and
impact from international competition
Context
Industry & Organisation
Market, Products, Consumers
Technological development
Printing industry in China
International exchanges and relocation of the production areas
1
3
4
5
6
4
15
31
44
127
A day with Mr Print
2
8
Part 1 –
Summary of
our methodology
and scope of the
study
5
Objectives of the study
• Collect and organise the main documents dealing with the European printing
industry and its environment.
• Identify the impacts on the sector.
• Set up a forecasting diagnosis describing the possible future ofthe sector.
• Determine the economic and international challenges for the sector.
• Identify and explain the structural and technological challengesof the sector.
• Identify the technological opportunities for the European printing industry to
evolve and improve its competitiveness.
Phase 2
Assessment
of impacts
Phase 2
Assessment
of impacts
Phase 1
Diagnosis
Phase 1
Diagnosis
Phase 3
Strategic plan
Phase 3
Strategic plan
• Measure and evaluate threats and opportunities.
• Measure and evaluate the foreign structural changes that are likely to threaten
the European printing sector.
• Measure and evaluate consequences resulting from possible technological
improvements.
• Identify development of strategic priorities
• Identify efficient innovation levers for the sector.
6
Outline of our approach (1/2)
The study lasted 8 months and was monitored by a steering committee formed by the
European Commission.
This steering committee met three times during the course of thestudy in order to validate the
work in progress for each of the following phases:
1. Diagnosis
2. Evaluation of impacts
3. Setting-up of a strategic plan
European Commission would like to thank all the members of the steering committee for their
participation in the production of the content of this report, including the following :
• Ms Beatrice Klose, Intergraf
• Ms Anne-Marie De Noose, Intergraf
• Ms Martina Flink, Intergraf
• MrNicola Konstantinou, UNI-EuropaGraphical
• MrDavid Mahon, FAEP -European Federation of Magazine Publishers
• Ms Sophia Chrysopoulou, EPC/European Publishers Council -Europe
Analytica
• MrRick Stunt, ENPA Newsprint
• Ms Helene Juhola, ENPA Federation of the Finnish Media Industry
• MrIsidoreLeiser, Stratus Packaging
• MrStephan Schumacher, Bertelsmann AG
7
The main actions launched during this study were allocated to the diagnosis phase:
• A workgroup with the British Federation
• Four workgroups in four European Countries :
• A workgroup bringing together French Printers in Paris
• A workgroup bringing together Italian Printers in Milan
• A workgroup bringing together German Printers in Frankfurt
• A workgroup bringing together British Printers in London
• Interviews with stakeholders of the graphic industry, mainly clients of printers, in order to
gain a deeper understanding of the industry’s main market stakes
The evaluation of impacts phase was composed of three milestones:
• A technological seminar led by the EFPG (French Engineering School dedicated to the
paper and graphics industries), bringing together academics, suppliers and technological
experts in the graphics industry. This seminar was fruitful in that it identified the main impacts
on the competitiveness of the European Graphics Industry that could be brought about by
technological improvements expected in the future.
• About 30 interviews with European experts
• A quantitative survey, the aim of which was to provide statistics relating to the main impacts
identified in the previous phase. The survey consisted in the setting-up of an online
questionnaire circulated to a list of printers provided by national federations. Nevertheless the
survey did not obtain the adequate number of responses enabling the mathematically reliable
exploitation of figures for statistical use. In agreement with the steering committee, the results
of the survey have not been mentioned in the report hereafter.
The last phase dealt with a proposition for a strategic plan to support the European graphics
Industry. A strategic seminar teaming the steering committee and representatives of national
federations took place in Brussels on 2 May in order to submit and validate the plan of action
developed. The different points of view of those present concerning the diagnosis were also
collected during the seminar.
The scope of the study was defined at the first steering committee meeting:
• The study will focus on activities listed under the NACE code 22.2.
• Due to conflict between diverse data sources, EurostatDatabase has been taken as a source
of reference, whenever information is available.
• Accounting for around 80% of the whole European Graphics Industry’s turnover, number of
employees and number of companies, the following countries have been considered as
representative of the European sector: Germany, the United Kingdom, France, Italy, Spain,
Belgium and the Netherlands. Most of the qualitative or quantitative analyses have focused
on this country panel.
• These countries will represent EU27, but sometimes EU15 wheneverthe distinction is
pertinent.
• The findings and conclusion of the study are particularly relevant for sheetfeld offset printing,
which is currently the widest used printing process, and partially for weboffset, rotogravure,
digital printing and packaging printing.
8
Part 2 –A day with
MrPrint :
a short story illustrating the daily and
structural problems faced by a
European SME manager …
9
It is early one chilly morning and Marc Print shivers as he pushes open
the door into the reception area at his printing business. He has got out of
bed on the wrong side this morning, and the very idea of an appointment
with his banker does not really thrill him.
«Les EtsPrinteur», Marc’s printing company, is located in a bleak
industrial estate. The workers didn’t really appreciate the move five years
ago, to a location further away from their homes, and with public transport
always either on strike or running late. Marc had warned them that they
would have to travel by car anyway due to their hours and shifts. So they
all moved with the company –what other work would they have found
nearby?
Marc walks to his office carrying his briefcase. He first goes to the
planning department. At this hour, there is hardly anyone there except for
people working in production and planning.
Standing in front of the wide blackboard on which the planning has been
drawn up, he listens to his young planning manager who is reporting on
events which occurred during the previous night.
“Rotonumber 3 broke down at 20hrs yesterday. The head foreman tried
to solve the problem himself but in the end he had to to call the
maintenance team who diagnosed that the strain controller was deficient.
Since all these machines are stuffed with electronics, they had to wait
until the next morning for the electro mechanical technician to arrive.
Since then everything has been fine, the press is running at 40000 rpm.
We still have delays on remaining jobs, we won’t be able to do the short
prints for the county council, you know the monthly edition. I’ll have to put
the print for Legrandfirst. It will be stapled on the press, and the job has
to be delivered today”
It has always been the same story, the same thing, ever since Marc has
worked in the company created by his father 40 years ago. Of course the
presses are different from in the past, even the preparation of the presses
has changed from when the operators used to cut the films with stanley
knives to insolate them. Now the company is using CTP (computer to
plate) in pre-press. However, technical problems still occur regularly in
the production process. There have always been dissatisfied customers
about delays, although we try the best we can to satisfy them. We have to
pamper them otherwise they go elsewhere. If they knew how hard and
complicated it is being a printer…
Before leaving the planning department, Marc takes a look at thework
load. There is just enough to fill the next two or three weeks, not more.
The salesmen will need to be shaken up a little bit; just as well he’s
seeing them on Monday for a business meeting.
Going back to his office, he finds that his assistant has just arrived.
“Any appointments scheduled for this morning?”
“Yes, Marc. This morning, there is a meeting with the worker
representatives. I have put all the information you need in the file with the
agenda, and comments from Philippe. Then, this afternoon, you know …”
Of course he remembers, the bank…
10
Philippe, the staff manager, is a great person, devoted and highly
competent. He does not hesitate to reprimand or to say no, but he is
always ready to listen, and he is very humane. That counts, in asmall
company.
Marc goes into his office; he has to study the file for the meeting with the
trade union.
”It’s been two years since we’ve been given a rise. The break time could
be included in the working hours.”Of the three employees on the other
side of the table, Karineis the most virulent and the one who has been
with the company for the longest time.
Marc thinks for a few seconds. He had promised himself that he would
not give way at all. It is not possible, the company’s results are too poor.
He does not have to deal with the hardest trade representatives;he
knows some of his colleagues who do…
At the same time, he quite understands the workers. He has not been
able to maintain their purchasing power, and rises in wages havebeen
kept for the most deserving. The problem is, those who are claiming for a
wage rise are the operators, the ones who are already the most well paid.
And if he gives them what they’re asking, he will be forced to give
something to all the others, otherwise things will go badly, Karinehad
warned him.
He knows all the workers very well, the ones who have been with the
company for longest already worked for his father. In most cases, he also
knows their families whom he meets at Christmas celebrations.
“So what do you say?”Karinesays to Marc who gives a start, surprised
by her tone.
Karineworks in prepress (equipped with CTP and CAP). That has always
been the way of things –the union members often come from prepress
and maintenance. Well things don’t change.
The phone at the end of the table rings. Pierre answers it and passes it to
Marc: “Press no. 3 has broken down again”
Marc takes the phone. “Yes, just a minute, I’m coming, we’ve almost
finished.”
Marc speaks calmly to Karine, aware that everybody is watching him: “It’s
an emergency, we’re going to have to stop the meeting. But I have
understood your problems and claims. I propose that the break time
should indeed be reckoned as time, but as part of the modulation hours,
not the regular working time. Philippe and I will make you a proposal for
the next meeting. Is that OK?”
He stands up, looking round at everyone for their tacit consent.Karine
nods in answer; they have reached an understanding.
[...]... manufacturers and customers ► To orientate technological developments towards final customers’ expectations more than only towards workflow management and the improvement of productivity ► To selectively promote CTP solutions ► To develop standards, and particularly communication standards, for the printing industry’s entire value chain Standardisation seems to be the key issue for the European Printing. .. macro-economic landscape of the EU 27, the European graphic sector integrates all stages of the graphic industry value chain Furthermore, eminent market leaders are well-established actors of the sector - although they might be dispersed - thus gearing up the sector while enabling a worldwide visibility The European graphic industry can supply a diverse and polymorphic offer of technologies and associated... concerned, as they are confronted with foreign competitors who are active in their markets Globally this market is static and not really dynamic Is there enough room for expansion for all the players? What kind of future could there be for small companies without significant structural changes? Are these companies too numerous and destined to strive for survival? The industry appears to be too fragile, too fragmented,... challenges for the European printing industry 25 1 Strategic challenges mutate from a commodity industry into an added value industry ► ► To improve the management of human resources and investments, and have better control over all the financial issues ► To anticipate and prepare for the transfer of small and family-owned enterprises ► To rationalise investment strategies in the printing industry to prevent... possible to improve the flexibility of the printers ► To set up a network dealing with technological aspects (and standards) and working at European level ► To integrate service management and to offer a global multi-channel solution to the customer (who could provide some multi-format entrance data) ► To reduce production costs by the automation of existing processes in order to increase flexibility and. .. industrials of the sector have put in place an efficient environmental policy that helped them to be classified world leaders in environment related matters In fact the European law system is often a reference for any country’s printing sector This strength makes it easier for European products to be at the level of any environmental standard throughout the world • All the value chain actors (raw materials,... throughout the world at the same time and thus the European Industry does not have any more this competitive advantage As many printers do not leverage the innovations proposed by their suppliers and are most often not able to develop by their own customized solutions for their clients, they could be reduced to suppliers of production capacities and loose a large part of the control of their prices and margins... called Legrand’s purchasing department.” A pause And? ” Marc and Antonio are having their second coffee, sitting at a small round table, in the huge, noisy room at “la Brasserie du Commerce” Lunch is often an opportunity for Marc to talk with the company’s executives, to cheer them up in times of stress This is not usually the case for Antonio, the best salesman and the one generating and managing the portfolio... much on the printing as on those services He told me about the archiving of files in the production flow process and also last-minute changes on CAP, finished-product stocking, routing services for their registered customers, and even stocking/packaging of gifts, gifts they offer with their loyalty card All of this with quality audits and performance indicators, you see what I mean? We’ll be able to manage... that are covering all the processes of the graphic industry, are responding to time and quality constraints coming from the market In addition, the European graphic industry has modern and efficient production facilities enabling them to remain competitive on its markets thanks to a massive investment policy and the use of Information Technologies Being the cradle of modern printing, Europe kept a tradition . Competitiveness of the
European Graphic
Industry
Prospects for the EU printing
sector to respond to its
structural and technological
challenges
2007
©EuropeanCommunities,. Identify and explain the structural and technological challengesof the sector.
• Identify the technological opportunities for the European printing industry to
Ngày đăng: 18/03/2014, 02:20
Xem thêm: PROSPECTS FOR THE EU PRINTING SECTOR TO RESPOND TO ITS STRUCTURAL AND TECHNOLOGICA, CHALLENGES pptx, PROSPECTS FOR THE EU PRINTING SECTOR TO RESPOND TO ITS STRUCTURAL AND TECHNOLOGICA, CHALLENGES pptx