Applications Mechanical Seals Sealing Technology in Pulp and Paper Production 50 E Your partner for sealing technology worldwide EagleBurgmann – Your partner for sealing technology in the pulp and paper industry Worldwide demand for paper and paperboard in 2005 was about 360 million tons and is likely to grow to about 500 million tons by 2020 The pulp and paper industry therefore continues to be a definite growth sector If anything, developments such as the “paperless office” or “new media” have actually contributed to an acceleration in the consumption of paper With paper consumption continuing to rise, it is becoming extremely important to strike a harmony between economy and the protection of the environment This implies a careful use of wood as a regenerative material, controlled consumption of water and energy, and particularly the recycling of waste paper as a “raw material” Modern sealing technology makes a major contribution to optimized production processes and their further development Cartex-QN The paper industry today The processes needed to produce pulp and paper are highly energy-intensive If only for reasons of economy companies are concerned, therefore, to minimize the specific consumption of their mostly self-generated supplies of steam and electricity through continuous rationalization and modernization Circulating systems are used, for example, to reduce the fresh water content of the vast quantities of water required in pulp and paper production This in turn cuts the amount of waste water that is subjected to mechanical and biological treatment, usually in the companies’ own sewage treatment plants And where the chemicals used in pulp production are concerned, the biggest part is now recovered and recycled Environmental protection With its collection and recycling of old paper the paper industry is making a major contribution to easing the pressure on our environment In hardly any other sector has the recycling of raw materials attained such significance Chlorine-free bleaching is the state-of-the-art technology which has been used for many years now, and the production processes used for producing pulp are being perfected all the time to ensure that they are as environmentally compatible as possible Sealing technology more important than ever Sealing technology has an inestimable role to play if the demands of economy and ecology are to be fulfilled as well as possible Sealing systems used in the transportation and processing of the various media should function without maintenance but with maximum safety reserves Yet components in the different processing stages are being exposed to more stress than ever before from the increased use of chemicals and higher stock consistencies Mechanical seals are usually the first choice these days for use in pumps and mixers, provided they comply with an extensive catalog of requirements They must be wear-resistant, rugged and protected against dry running, have smooth surface contours with by and large no empty spaces, and be universal in application and easy to install A matter of trust A large number of major international suppliers of machinery to the paper industry trust in EagleBurgmann seals: ABS Scanpump, Andritz, Andritz-Küsters, Metso, Netzsch, Sulzer, Voith, to name just a few Service with a capital “S” Even the perfect seal calls for expert consulting, staff training and after-sales service in the event of trouble Ask us about the extensive range of services covered by our TotalSealCare® service No paper without water This simple phrase is still true today, even if specific water consumption per ton of produced paper has been substantially reduced over recent years High-quality water is a scarce resource which varies from region to region, and for an industry with a strong commitment to cost-effectiveness and the environment such as the paper and pulp industry, the challenge is to use water as efficiently as possible The industry is the fifth biggest industrial consumer of water in Germany and therefore has a particular duty to ensure that it uses the water efficiently and carefully By managing to constrict the recirculating water systems ever more, the paper and pulp industry has achieved drastic reductions in water consumption and associated waste water The specific waste water level, for example, has now been cut to less than 10 l/kg and any further reductions now only appear possible with difficulty However, the achievement of what are more or less completely closed water circulation systems has in turn led to other problems such as the accumulation of micro-organisms and harmful substances, for example, which are an impairment to the production processes LP-D for “non-flow” operation Mechanical pulp production A pressure grinder (Metso) for producing groundwood pulp, as seen during installation By raising the pressure it was possible to break up the wood structure at a higher temperature, with a higher moisture content and less stress on the product Groundwood pulp is mostly produced by mechanical means, with up to 95 % of the wood input being converted into pulp Compared with the production of chemical pulp the yield is about twice as high, although the process does consume large amounts of energy For groundwood pulp production, debarked timber is processed in (pressurized) grinders (PGW, GMP) An alternative method is to fiberize chips in refiners In this case a distinction is made between thermo-mechanical (TMP) and chemithermo-mechanical (CTMP) pulp In the TMP production process the chips are pre-treated with steam In the CTMP process the chips are additionally impregnated with a sulphurcontaining pulping solution of Na2S03 The structure of lignin becomes less tight and deformable This results in largely unharmed individual fibers with high strength and a wood-based material which is of higher overall quality See flap for explanation of code numbers and seal group selection CTMP 21 11 Steam 37 Mechanical pulp production 11 Steam 31 35 23 11 37 21 Steam TMP 37 Steam Steam 16 17 35 11 23 31 11 19 18 11 31 27 37 21 23 24 18 15 PGW Fillers and pigments 30 18 18 20 10 12 GMP 20 18 18 13 30 25 24 26 18 22 = Chemicals TMP refiner equipped with double seals In the Metso refiner, for example: H-D10/2270E1 (p1 = max 10 bar, t1 = max 180 °C, n = max 2,300 -1) Chipped wood is steam-treated at up to 180 °C and then broken up into individual fibers in the pressure refiners 18 To the paper machine Chemical pulp production Pre-bleaching 16 16 5 36 20 18 36 33 30 18 19 36 11 37 15 Multistage bleaching 20 10 20 2 19 17 18 18 37 24 White water 12 From the chemical recovery system 24 Chemical recovery system Chemical recovery Recovery boiler 29 Digester 20 5 29 SO gas Sulphite process Boiler 29 Stock pump (Sulzer Ahlstar UP) equipped with a Cartex-DN double seal and supplied by an FLC200 water supply unit, for example Digester 23 14 22 21 Sulphate process 29 5 26 Fillers and pigments 23 18 To the paper machine = Chemicals See flap for explanation of code numbers and seal group selection Pressure screens (Lamort) are sealed successfully with either type HJ977GN, MFL85N6 or HR10 mechanical seals, according to pulp consistency Pulp production Sulphate process Sulphite process Pulp is produced from wood chips which are broken down with appropriate chemicals at elevated temperature and pressure In contrast to mechanical pulping, this process involves the removal of the lignin Depending on the requirements on the end product the pulp, which in chemical terms is comprised of cellulose and hemicellulose, is bleached in a number of stages The current state-of-the-art in bleaching technology is chlorine-free bleaching with chemicals which work on an oxidative basis such as oxygen, hydrogen peroxide or ozone In the sulphate (or kraft) process the wood chips are boiled in an alkaline sodium solution (NaOH + Na2S) to remove the lignin from the wood Although this process subjects the fibers to the least strain and produces pulp of a very high strength, the pulp is more difficult to bleach However, since this process is suitable for breaking down every type of wood and also produces pulp of exceptionally high quality, the kraft process has become established as the most widely used process for pulp production The sulphite process removes the lignin from the wood by means of a digesting solution consisting of sulphurous acid (H2SO3) and a base (e.g Ca2+, Na+, Mg2+ or NH4+) Compared with sulphate pulp, the sulphite variety is lighter in color but not as strong Only certain types of wood are suitable for the sulphite process, of which spruce and beech are two; pine on the other hand, cannot be broken down using this process In both processes the waste materials produced during the removal of the lignin and the recovery of the chemicals are used to generate energy and steam Waste paper treatment The recycling of raw materials is a priority objective of every modern, ecologically oriented industrial society In no other sector has the collection and recycling of raw materials attained such significance as in the paper industry In 2005, 79 % of waste paper was recycled in Germany In terms of the recycling and re-use of waste paper, therefore, Germany is ahead of every other country in the world The collected paper is first sorted and pressed into bales Mixed with plenty of water and a certain amount of chemical additives it is then fiberized in so-called pulpers and sorted into slightly and heavily contaminated fractions Ink is separated with the help of chemicals and mechanical force in the de-inking process and the subsequent flotation can be skimmed as foam from the surface Depending on its ultimate use and required quality, the waste paper stock thus obtained can now be bleached, either on an oxidative (hydrogen peroxide) or reductive (formamidinosulfinic acids or dithionite) basis De-inking (flotation principle) stock pumps and screens in the de-inking plant of Stora Enso Maxau are sealed with EagleBurgmann type HR10 seals (in dead-end arrangement) Flushing with circuit water (white water) is carried out only when the medium has a high solids content The combination of face materials is SiC/SiC (d1 = 46 … 130 mm; p1 = mWC; t = 60 °C; n = 980 –1; medium = pulp (0.2 … % abs dry) with a high content of air) Pulper Voith slot sorting machines in a paper recycling plant used to manufacture standard and upgraded paper for newspapers 30 19 Waste paper treatment system 32 Pre-bleaching 19 27 19 20 18 18 18 18 18 25 28 % (right) and 15 % waste paper stock HR10 Reductive after-bleaching Fillers and pigments 18 30 18 6 20 13 20 18 19 18 19 24 24 19 38 = Chemicals See flap for explanation of code numbers and seal group selection To the paper machine Paper production All the raw material components (groundwood pulp, chemical pulp, waste paper pulp, fillers and other additives) are fed to the stock preparation plant where the stock is mixed The circulating water from the paper machines is used to dilute the stock according to the requirements of the chosen paper (consistencies from around 0.1 to 1.3 %), and before the stock is fed into the head box it is cleaned again The standard equipment used for mechanical paper production is the endless wire paper machine, which contrasts with the board machine on which different types of boards can be made The stock is transferred from the head box to the wire section where the water is removed from the endless web of paper Most of the water which has to be removed is removed in the wire section and the web of paper is then transferred to the press section More water is removed under the application of pressure and vacuum 10 Following the press section the web of paper, which is still damp, is forwarded to the drying section where all remaining moisture is removed by rotating drying cylinders heated by steam on the inside This is followed by the calender section, comprised of to rolls, where the paper, which is still rough at this stage, is smoothed out 30 24 Paper machine 18 18 Groundwood pulp Chemical pulp Waste paper pulp 31 20 34 24 33 22 14 See flap for explanation of code numbers and seal group selection Paper finishing Depending on the quality of paper required the paper machine may be followed by further units for upgrading the web of paper One method used for improving the surface quality and printability of the paper is coating In this operation a coating paste comprised of pigments and binding agents is applied to the surface of the raw paper In terms of the coating process itself a distinction is made between doctor blade coating, coating with film presses and new coating processes such as curtain coating and spray coating Coating is used above all for graphics papers However, even after it has been through the smoothing rolls in the machine the paper still has not achieved the quality required for highgrade writing paper and printing paper This is only achieved by calendering, in which the paper is compacted and the surface upgraded even further Here the webs of paper run through to 10 pairs of rolls in the calender which are either heated or cooled depending on requirements LP-Q 11 RGP 68 DD (Metso) at SCA Refiner grinding disc S2000 Refiner from Andritz Applications for mechanical seals Fiberizing processes Refiners Single disc refiners have a fixed and a rotating disc whereas double disc refiners have two counter-rotating discs The fiberized material leaves the refiner together with the process water and is either forwarded directly to the sorting section or is ground further in a second refiner stage, normally under atmospheric pressure, until it has reached the required degree of grinding Operating conditions: Temperature … 200 °C Pressure … 16 bar Sliding velocity … 40 m/s Axial displacement of the shaft 0.2 … 100 mm Medium: Wood fiber, lignin, water(steam) Seal solution: EagleBurgmann H-D double seal with a stationary spring arrangement protected from the product, and rotating seat Flushing on the product side prevents the medium from entering the sealing compartment (as used, for example, in Andritz, Pallmann and Metso refiners; where water flushing is on the product side these seals last for about to operating years on average) 12 Pressure grinding machines When it comes to grinding processes, pressure grinding is now the most widely used method because it produces a higher quality of pulp The fibers are loosened by grains of corundum embedded in the surface of the grinding stone The fibers isolated from the tissue structure in this way are sprayed with jets of water to remove them from surface of the stone, to land in a grinding trough below the stone Operating conditions: Temperature … 150 °C Pressure … bar Speed … 350 min–1 Shaft diameter … 450 mm Shaft displacement: Axial … ± mm; radial … ± mm Medium: Groundwood pulp, water(steam) Seal solution: EagleBurgmann HSSHRS8-D4 double seal of cartridge design; rotating seat, stationary spring arrangement protected from the medium, seal faces with hydrodynamic grooves for better lubrication of the sliding faces, clean water as the buffer medium Seals in pressure grinding machines (from Metso, for example) have to be as reliable as possible This is because every repair necessitates dismantling the entire rotating unit of the pressure-grinding machine (shaft, grinding stone, bearings and seal), resulting in at least three days of lost production, including shutting down and starting up the grinder With the service life of the grinding stone generally being about four years, the seal is increasingly expected to last just as long Metso refiner for groundwood pulp production Pulp transportation Centrifugal pumps (stock pumps) The design of pump to be used will vary according to the consistency of the pulp (thin, medium or thick pulp) The vast majority are pumps for thin pulp with a pulp consistency of up to a maximum of % abs dry There are also special forms of thin pulp pumps such as, for example, fan pumps and digester pumps So-called MC pumps (MC = medium consistency) are used for conveying pulp in the medium consistency range of between to 18 % abs dry These are used mainly in the bleaching stage, but are also widely used for the processing of waste paper as well Centrifugal pumps are not suitable for thick pulp Operating conditions: Temperature 20 … 170 °C Pressure … 25 bar Sliding velocity … 30 m/s Resistance to chemicals pH … 14 Sulzer Ahlstar UP equipped with a Cartex-DN (double seal) Medium: Water with pulp; abrasive contamination and solids; poor lubrication characteristics, to some extent harmful to the environment Seal solution: ■■ MG12, MFL85N, HJ977GN component seals ■■ e.g EagleBurgmann MG12S14/ d1G1 rubber bellows single seal with a rugged spring with unrestricted allround flushing, and no dynamic O-ring The special feature here is the enlarged gap between the shaft and the inner diameter of the seat ■■ Cartex-SNO, LP-S single cartridge seals, e.g LP-S-S32-E10/60-00, a semi-cartridge seal adapted to the machine featuring a stationary super sinus spring arrangement protected from the product, rotating seat with double elastic support, shrink-fitted sliding faces, smooth external contours on all seal parts in contact with the product ■■ Cartex- DN, LP-D double cartridge seals, e.g EagleBurgmann CartexDN/60-E31 double cartridge seal with a pressurized buffer water supply, stationary and encapsulated springs, rotating seat, self-closing in case of pressure reversal (double balancing), can also be used as a single seal with quench, quick and easy to install The EagleBurgmann Cartex is one of the most successful cartridge seals available, and that applies to pulp and paper production as well Just some of the companies who use it are Stora Enso, Norrsundet/Sweden, Iggesund Paper, Iggesund/Sweden, Smurfit Kappa, Pitể/Sweden, Zellstoff Pưls, Austria 13 Mixing processes In the pulp and paper industry, mixers are used either for blending different media, homogenizing ready-prepared mixtures or preventing existing mixtures from segregating again Given the diversity of tasks that mixers are required to fulfill they also vary considerably in terms of design, e.g pumps (largely horizontal centrifugal pumps) or agitators with top, bottom or side drives HGH 14 Sorting Operating conditions: Temperature … 180 °C Pressure … 18 bar Speed … 1,500 min–1 Shaft diameter … 240 mm Medium: Pulp suspension with a consistency of 0.1 % to % abs dry, chemicals Seal solutions: HGH, MG, HJ, LP-D, MR-D and even Cartex®, e.g EagleBurgmann HGH210/10-E6 half-split mechanical seal for a chest agitator at Sappi Lanaken/Belgium Installation is from the outside, horizontal (or vertical) It is important that there is sufficient axial latitude to enable the seal housing and seat housings to be pulled back far enough to allow access to the sliding parts The only parts that are split are the actual wearing parts, such as the seal face, the seat and the O-rings They can therefore be replaced easily without the need for complete dismantling Operation is with flushing into the product (which prevents concentrations of the product building up on the sliding faces) and a quench on the atmospheric side If a stand-still seal is fitted it is also possible to carry out inspection work on the seal without interrupting operations, even with a full container The job of the sorting machine is to remove foreign material such as sand and undesirable form elements such as splinters The sorting operation is carried out at a high level of dilution (pulp consistency of no more than % abs dry) to ensure that the foreign material can move with relative freedom Vertical sorters operating under pressure are normally used these days The advantages of these kinds of plants are that they offer high throughputs, are insensitive to load variations and have closed systems of pipework which means they lose less steam and heat Operating conditions: Temperature … max 80 °C Pressure … max 12 bar Speed … 2,500 min–1 Shaft diameter … 175 mm Medium: Pulp suspension with a maximum pulp consistency of % Axial displacement of the shaft ± 1mm Installation position: vertical Seal solution: HR, LP-D, HRS-D e.g EagleBurgmann HR10S2/100G11E1 single cartridge seal for a Voith sorter with rotating seat and stationary, group spring arrangement protected from the medium LP-D-ST-D15/130-DE double seal for a Metso Tampella sorter in non-flow operation without buffer fluid system, with substantially reduced water consumption in use at the Palm paper factory in Wörth Paper finishing Eccentric screw pumps Eccentric screw pumps are used mainly for the finishing of the raw paper, e.g for the preparation of coating paste The media used here are generally characterized by a high solid content, high viscosity and tendency to stick, which means they have poor lubrication properties Operating conditions: Temperature approx 40 °C Pressure 1… bar Speed … 400 min–1 Medium: Coating pastes with latex Seal solutions: EagleBurgmann MG1S50/65-G6 single seal with elastomer bellows, seal face with knife edge EagleBurgmann Cartex-DN/55-E2 Double cartridge-style seal, pressurized buffer medium (as used, for example, by BASF in Ludwigshafen: Pulp & Paper Test Center, dispersing plant) Calender rolls Heat is generated by the high pressing forces and friction involved, which has a strong influence on the results of the calendering process For heavy glazing, therefore, the steel rolls have to be cooled, whereas light glazing requires them to be heated Operating conditions: Temperature … max 200 … 300 °C Pressure … max bar Speed … 600 min–1 Shaft diameter … 460 mm Medium: Thermal oil Special features: Expansion of the long rolls under heat Seal solution: EagleBurgmann MFLW81 metal bellows seal for high temperature applications (as in Küsters calender rolls, for example) Calenders (Kleinewefers; Küsters): EagleBurgmann MFL W80S1/475 seals are used successfully to seal off the oil used for heating the rolls and for lubricating the bearings (p1 = … bar; t = 20 … 200 °C; n = … 462 -1; axial displacement ± mm) 15 EagleBurgmann BestFlow: Temperaturecontrolled valve for ‘non-flow’ operation Greater cost effectiveness thanks to reduced water consumption As little water as possible, as much water as required EagleBurgmann FLC200: Control unit for the individual setting and monitoring of pressure and flow rate at the seal 16 The costs of water and sealing water management have become increasingly important issues in the paper and pulp industry over recent years Growth in environmental awareness, stricter environmental regulations, water recirculation systems which are largely self-contained, the increasing cost and effort associated with supplying and treating the water and higher operating costs in general have all led to a change in approach and are the main reasons for this development An approach which protects resources is not only good for the environment - saving water and energy also makes it possible to achieve substantial and above all measurable reductions in costs Furthermore, investigations have also shown that actual consumption levels are often above recommended levels because this is believed to be necessary for safety reasons Many producers of pulp and paper are therefore keen to run seal systems with methods of operation which, while meeting requirements for necessary operational safety, use only minimum amounts of water or, where possible, even dispense altogether with the use of sealing systems involving flushing or buffer water Major potential for savings Mechanical seals, single seals with or without flushing and/or a quench, and double seals with pressurized water supply all operate in different ways and these differences have a major influence on the amount of water they use For example, the use of a supply unit along with the operation of a double seal can, subject to specific operating conditions, achieve savings in buffer water consumption of up to 97 % compared to operation with an open flow Low outlay, big effect: A range of different control units can be used to control and reduce the water supply, depending on each specific application EagleBurgmann offers a range of systems designed to help save water without any impairment to the safe and reliable operation of the mechanical seals EagleBurgmann FLC100 Flow Controller: A control unit for a constant, pre-defined and pressure-independent flow EagleBurgmann Thermosiphon System: A supply unit with a closed circuit for double seals in which the only water consumption is the leakage on the seal, which has to be replaced 17 Selecting mechanical seals for individual applications Group S Group Q Cartex-SNO Cartex-QN Single cartridge seal Designed for retrofi tting pumps by the end-user Stationary spring arrangement protected from the product Complete with fl ush connection as standard LP-S Single seal of modular design for easy upgrading into a Q and/or D version Service-proven design as original equipment for stepped shafts Rotating seat, encapsulated spring HJ977GN10 Single seal Rotating, encapsulated springs Fitting dimensions to EN 12756 Reversal pressure design MFL85N6 Single seal with metal bellows No dynamic O-ring Open space in the seal area, all-around fl ushable Fitting dimensions to EN 12756 MG12S14 18 Rubber bellows single seal Robust spring with unrestricted all-around fl ushing Enlarged gap to the shaft on the atmosphere side Seat fi tting dimensions to EN 12756 Cartridge seal with quench LP-Q Same design and characteristics as the LP-S but with quench cylinder, lip seal and threaded port on the atmosphere side Group D Group X Cartex-DN H-D Double cartridge-type seal Self-closing in the event of pressure reversal (double balanced) Can be operated as a single seal with quench LP-D Double seal of the same design as the LP-S on the product side but with a fl ange on the atmosphere side with a second, internally pressurized mechanical seal Example of a special double seal with stationary springs and rotating seat used in refi ners successfully now for more than 15 years MFLW S Example of a special single metal bellows seal used in calender rolls MG1S50 Rubber bellows seal with knife edge face successfully used in eccentric screw pumps for latex-containing coating paste 19 Seal groups and types Seal groups and recommendations Seal group De-inking TMP CTMP SGW PGW Sulphite Process Sulphate Code No Machine Bleach pump l l l l l l l D Chest agitator l l l l l l l S Strong liquor pump l l – – – – – Q/D Pressure grinder – – l – – – – X – – – – – Q/D From within the groups it is possible to select the seal suitable for the specific requirements of the machines needing to be sealed The seal types and their special features are listed on the following page (p 19) As a rule, all the mechanical seals described are able to comply, in terms of pressure, temperature and velocity, with the conditions of application found in pulp and paper production Weak liquor pump l l Thickener l l l l l l l Q Deflaker m m m m m m l S ■■ ■■ Eccentric pump l l l l l l l S/D Flotation pump – 10 Fluffer m m m m m m m X 11 Conveyor screw l l m m l l m Q 12 Shredder m m l l m m 13 HC pump l l l l l l l X 14 Calender rolls m m m m m m m X 15 Digesting agitator – l l – – – – – – l S – D – – – D 16 Digester pump l l – – – – – D/Q 17 Condensate pump l l – – l l – S 18 LC pump l l l l l l l S 19 MC pump 20 Mixer l l l l l l l D m m m m m m m S/D/X 21 Plugscrew feeder – 22 Disperser l l l l l l l D – – – l l – Q 23 Refiner m m m m l l m X 24 White water pump l l l l l l l S 25 Scraper m m m m m m m Q 26 Grinder – 27 Screw press m m m m m m m Q, D 28 Separator 29 Slurry pump l l l l l l l D 30 Sorter l l l l l l l X/D/S 31 Fan pump l l l l l l l S 32 Pulper – 33 Stock pump l l l l l l l S/Q 34 Vacuum pump m m m m m m m S/Q/D 35 Pre-heater m m 36 Washer m m m m m m m S 37 Rotary valve m m 38 Fibrizer m m m m m m l D 39 Coating paste pump m m m m m m m X – – – – – l – – – – – – – l l l l – X LP-S HJ977GN(10) ■■ MFL85N(6) ■■ MG1S50 ■■ MG12S14 ■■ Cartex-SN0 Q Single seals with quench p1 > p3 ■■ ■■ LP-Q Cartex-QN D Double seals p1 > p3 LP-D M7N/M7N back-to-back ■■ M74-D ■■ Cartex-DN ■■ ■■ X Special designs H-D (example) ■■ MFLW S (example) ■■ HR… ■■ LP … ■■ HGH… ■■ The components marked in the diagrams with a number in a circle are included for better understanding of the various processes Waste paper Dilution tank Make-up tower Bleaching tower Chest Flue gas cleaner Cleaner Diffuser Evaporator Barking drum Extraction tower Filter Flotation machine Green liquor clarifier Chipper Chip pile Chip bin Chip sorter Chip washer Hydrocyclone Lime kiln Causticizer Slaker Recovery boiler Centricleaner Lime sludge washer Sorter drum Washing tower White liquor clarifier Vibration screen Cyclone m m m m m m l S l Machine/unit used in the process m Machine possible in the process – Machine not used in the process – S Single seals Designation of other machines and plant components l D – – S – S = Single seal Q = Single seal with quench D = Double seal X = Special design Standard materials Combinations of face materials: Preferably silicon carbide (S-SiC/S-SiC) For double seals also SiC/carbon graphite on the product/atmosphere side Where there is a risk of running dry: SiC (carbon graphite) Secondary seals, O-rings: FKM (e.g Viton®), EPDM, FFKM (e.g Kalrez®), PTFE Spring and construction materials: 1.4571 (AISI 316 Ti); 1.4462, 2.4610 (e.g Hastelloy® C-4), Inconel® 718 EagleBurgmann in profile BURGMANN Certification ISO 9001:2000 EN 9100 ISO 14001 OHSAS 18001 Burgmann Plant I Wolfratshausen (D) EagleBurgmann Niigata (J) Burgmann Plant ll Eurasburg (D) Burgmann Plant Judenburg (A) ATEX 94/9/EG QHD Qualified Hygienic Design VDMA DIN/EN 729-2 HPO certified KTA 1401 Certified for Nuclear Power Plants ISO TS 16949 Specialist company in accordance with the German Water Resources Act (Section 19) Germanischer Lloyd Approvals ICC test center Umweltpakt Bayern (Bavarian Environment Agreement) All current certificates: www.burgmann.com/ QM EagleBurgmann – An alliance with a great deal to offer our customers and partners Under the joint name of EagleBurgmann Industries, Burgmann and Eagle Industry, Japan’s leading manufacturer of mechanical seals, together form the foundation stone for a global alliance – an alliance with a dedication to quality and service and a pronounced customer orientation The basis of this arrangement is an intensive and trusting cooperation that notably strengthens the global competitiveness of both partners and makes them one of the top suppliers of sealing technology in the world market A world-wide presence, market-orientated products and high-quality services must also be mentioned as key factors of success All this, together with the know-how and dedication of our employees, means that we have considerable potential to offer our customers We are there when you need us Customers want proximity, speed and solutions to their problems Thanks to our worldwide presence, flexibility and specialist know-how we can face these challenges with quiet confidence All over the world we offer our in-depth package of services – from the simple stuffing box packing to the complex high-tech seal, plus the backing of our „Total Seal Care“ modular support offering, which allows each customer to put together exactly the right package for his individual needs Numerous service contracts and international agreements attest to the trust which top-name companies place in our expertise and confirm the quality of our services 21 Helping to make our customers even more successful Our customers expect their plants to run without a hitch To this end we draw up innovative and user-friendly seal solutions which make sound economic sense and also contribute to compliance with the highest requirements in terms of safety and the protection of the environment Our mission is to enhance our customers‘ efficiency and productivity and be recognized world-wide as a reliable and expert partner for high quality and leading-edge technology A key role in achieving these goals and helping to make our customers even more successful is played by our employees and their technical expertise, creativity, motivation and efficiency EagleBurgmann in your vicinity Chilicote S.A Avda Julio A Roca 546 C1067 ABN Buenos Aires, Argentina Phone +54 / 11 / 43 43 84 69 Telefax +54 / 11 / 43 31 42 78 Australia EagleBurgmann Australia Pty Ltd 16 Stennett Road, Ingleburn, NSW 2565 Phone +61/ / 96 05 64 44 Telefax +61/ / 98 29 69 58 Austria EagleBurgmann Austria GmbH Vogelweiderstraße 44 a A-5020 Salzburg Phone +43 / 662 / 82 57 01 Telefax +43 / 662 / 82 57 03 Belarus Filter CJSV Logoisky tract and MCAD crossing Administrative building Expobel - Office 501 223053 Minsky district Phone +375 237 9365 Telefax +375 237 9363 Belgium EagleBurgmann Belgium B.V.B.A Zagerijstraat 11 B-2960 Sint-Job-in't-Goor Phone +32 / / 33 99 44 Telefax +32 / / 33 99 49 Brazil EagleBurgmann Brasil Vedaỗoes Industriais Ltda Av Sta Izabel, 1721 CEP - 13084-643 Barao Geraldo Caixa Postal 65 60 Campinas - Sao Paulo Phone +55 /19 / 37 49 97 40 Telefax +55 /19 / 37 49 97 42 Canada EagleBurgmann Canada Inc 8699 Escarpment Way, Units #9 & #1 Milton, Ontario / Canada L9T 0J5 Phone +1 / 905 / 693 87 82 Telefax +1 / 905 / 693 05 35 Nova Magnetics-Burgmann Ltd One Research Drive Dartmouth, Nova Scotia Canada B2Y 4M9 Phone +1/ 902 / 465 66 25 Telefax +1 / 902 / 465 66 29 Chile SelloTecno Ltda Luis Thayer Ojeda No 0130 OF 806 Providencia Santiago Chile Phone +56 / / 333 33 03 Telefax +56 / / 333 25 19 China Burgmann Shanghai Ltd No 127-8 Wenjing Road Minhang, Shanghai People's Republic of China Phone +86 / 21/ 64 62 05 50 Telefax +86 / 21/ 64 30 02 19 Burgmann Dalian Ltd No 86 Liaohe East Road, DD Port 116620 Dalian People's Republic of China Phone +86 / 411 8758 1000 Telefax +86 / 41 8758 41 EBI (Shanghai) Investment Management Co Ltd Room 205 B Cimic Tower No 1090 Century Ave Pudong 201120 Shanghai People's Republic of China Phone +86 21 58 36 15 99 Telefax +86 21 58 35 48 38 Colombia William Tobon & Cia Cr - 64 - 50 - Ext 301 Santafé de Bogota Phone +57 / / 21 76 75 Telefax +57 / / 21 76 75 Cyprus & Lebanon TRCI Ltd 122, Limassol Ave PO Box 24371 1703 Nicosia, Cyprus Phone+357 22 42 79 80 Telefax +357 22 42 30 21 Czech Republic EagleBurgmann Czech s.r.o Na Drahach 1364 CZ-15600 Praha Zbraslav Phone +420 / / 57 92 05 05 Telefax +420 / / 57 92 05 08 KE-Burgmann Czech s.r.o V Láznich 395 CZ-254 01 Jilove u Prahy Phone +420 / / 41 02 18 11 Telefax +420 / / 41 02 18 30 Denmark KE-Burgmann A/S Expansion Joints Division Park Allé 34, DK-6600 Vejen Phone +45 / 75 36 18 11 Telefax +45 / 75 36 15 32 KE-Burgmann A/S Seals Division Industrisvinget 1, DK-6600 Vejen Phone +45 / 75 36 49 88 Telefax +45 / 75 36 39 88 KE-Burgmann Bredan A/S Odinsvej 1, Box 129 DK-6950 Ringkobing Phone +45 / 96 74 28 00 Telefax +45 / 97 32 36 31 Ecuador Petroconsultant S.A Fco de Goya 262 Urb Los Cipresses II El Condado P.O Box 17-17-1254, Quito Phone +593 / / 49 17 52 Telefax +593 / / 49 35 09 Egypt Alimex Alexandria Import Export 258 Abdel Salam Aref Str Louran - El Saray Alexandria POB 313 Phone +20 / / 81 00 60 Telefax+20 / / 81 00 65 Estonia Filter AS Läike tee 9, Peetri Küla, Rae vald, EE-7531 Harjumaa Phone +00372 742 24 29 Telefax +00372 512 012 Finland KE-Burgmann Finland Oy Expansion Joints P.O Box 139, Ensimmäinen Savu SF-01510 Vantaa Phone +358 / / 82 55 01 Telefax +358 / / 82 55 02 00 Tiivistetekniikka Oy Mäkituvantie 5, SF-01510 Vantaa Phone +358 / 207 65 171 Telefax +359 / 207 65 20 07 France EagleBurgmann France SAS Zone d’Activité les Perriers 106/108 Route de Cormeilles BP 96, F-78505 Sartrouville Phone +33 / 1/ 30 86 50 20 Telefax +33 /1/ 39 15 16 07 Germany Kundenbetreuungs-Center Frankenthal Carl-Benz-Straße 15 D-67227 Frankenthal Service Center Rhein-Main Phone +49 / 62 33 / 770 89-120 Telefax +49 / 62 33 / 770 89-131 Werksbüro Frankenthal Phone +49 / 62 33 / 770 89-0 Telefax +49 / 62 33 / 770 89-130 Euroseals Customer Service Phone +49 / 62 33 / 770 89-0 Telefax +49 / 62 33 / 770 89-190 Kundenbetreuungs-Center Halle / Leipzig Airpark Merseburg Hans-Grade-Straße D-0621 Merseburg Werksbüro Cottbus Phone +49 / 3461 / 84 29 Telefax +49 / 3461 / 84 29 30 Werksbüro Leipzig Phone +49 / 3461 /84 29 Telefax +49 / 3461 / 84 29 30 Service Center Halle / Leipzig Phone +49 / 3461 / 84 29 20 Telefax +49 / 3461 / 84 29 30 Kundenbetreuungs-Center Köln Gewerbegebiet Rheinbogen Vorgebirgsstr 27 D-50389 Wesseling Service Center Köln Phone +49 / 2236 / 38 33 50 Telefax +49 / 2236 / 38 33 70 Werksbüro Köln Phone +49 / 2236 / 38 33 Telefax +49 / 2236 / 38 33 20 Kundenbetreuungs-Center Nord Postweg 190 D-21218 Seevetal / Beckedorf Service Center Nord Phone +49 / 4105 / 6750-0 Telefax +49 / 4105 / 6750-191 Werksbüro Bremen Phone +49 / 4105 / 6750-0 Telefax +49 / 4105 / 6750-193 Werksbüro Hamburg Phone +49 / 4105 / 6750-0 Telefax +49 / 4105 / 6750-193 Euroseals Customer Service Phone +49 / 4105 / 6750-0 Telefax +49 / 4105 / 6750-190 Werksbüro Oldenburg August-Wilhelm-Kühnholz-Str 45 D-261 35 Oldenburg Phone +49 / 41 / 46 39 Telefax +49 / 41 / 54 28 Kundenbetreuungs-Center Ruhr Am Piekenbrocksbach D-46238 Bottrop Service Center Ruhr Phone +49 / 2041 / 88 51-50 Telefax +49 / 2041 / 88 51-70 Werksbüro Ruhr Phone +49 / 2041 / 88 51-1 Telefax +49 / 2041 / 88 51-20 Kundenbetreuungs-Center Südwest Karlstraße 82 D-721 38 Kirchentellinsfurt Werksbüro Freiburg Phone +49 / 71 21 / 67 84 93 Telefax +49 / 71 21 / 96 30 44 Werksbüro Stuttgart Phone +49 / 71 21 / 96 30 43 Telefax +49 / 71 21 / 96 30 44 Service Center Bayern Burgmannstr D-82547 Eurasburg Phone +49 / 81 71 / 23 17 37 Telefax +49 / 81 71 / 23 63 Service Center Marl Geb 1 92, PB Paul-Baumann-Str D-45764 Marl Phone +49 / 2365 / 98 61 64 Telefax +49 / 2365 / 98 61 60 Werksbüro Frankfurt Diezer Straße 08 D-65549 Limburg/Lahn Phone +49 / 6431 / 22 99 Telefax +49 / 6431 / 22 98 Werksbüro München Postfach 240 D-82502 Wolfratshausen Phone +49 / 81 71 / 23 71 Telefax +49 / 81 71 / 23 49 Werksbüro Nürnberg Riedäckerweg D-90765 Fürth-Stadeln Phone +49 / 91 / 67 00 87 Telefax +49 / 91 / 76 76 23 Werksbüro Regensburg Aussiger Str e D-93073 Neutraubling Phone +49 / 9401 / 52 22 77 Telefax +49 / 9401 / 52 23 73 Espey Burgmann GmbH Thomas-Edison-Str D-47445 Moers Phone +49 / 2841 / 99827-0 Telefax +49 / 2841 / 99827-55 Great Britain EagleBurgmann Industries UK LP 12, Welton Road Wedgnock Industrial Estate GB-Warwick CV 34 5PZ Phone +44 /1926 / 41 76 00 Telefax +44 /1926 / 41 76 17 KE-Burgmann U.K Eaton Bank, Congleton GB-Cheshire SW12 1NZ Phone + 44 / 1260 / 29 12 89 Telefax + 44 / 1260 / 29 13 03 Greece A.G Stambolidis & Co Mitrodorou 22 GR-10441 Athen Phone +30 /21/ 05 15 06 65 Telefax +30 /21/ 05 15 08 10 Hungary EagleBurgmann Hungaria Kft Lejtö utca H-1124 Budapest Phone +36 /1/ 19 81 31 Telefax +36 /1/ 19 81 25 India Burgmann India PVT LTD A.K Industrial Estate Madina Manzil Compound S.V Road, Goregaon (West) Bombay 400 062 Phone +91/ 22 / 28 74 15 34 Telefax +91/ 22 / 28 74 88 10 Eagle Seals & Systems India Ltd 21 2/2, Hadapsar Off Soli Poonawalla Road Pune 41 028 India Phone +91 / 20 / 2699 3900 Telefax +91 / 20 / 2699 3921 KE-Burgmann Flexibles India Pvt Ltd Survey No 1426 Nagappa Industrial Estate,194 G.N.T Road, Puzhal Chennai 600 066 , India Phone +91 / 44 / 59 06 32 Telefax +91 / 44 / 59 09 17 Indonesia PT EagleBurgmann Indonesia Jl Jababeka Blok J6-E Kawasan Industri Cikarang Bekasi 17550 - Jawa Barat Phone +62 / 21/ 93 53 13 Telefax +62 / 21/ 93 53 15 Irak WTE Ukba Sq., Mahala 929 Zuhak 2, House No P.O Box No 2421 Al Jadria, Baghdad Phone +964 171 99033 Telefax +964 171 93034 Iran Burgmann Pars Sealing Systems Co No 1, Kokab Alley, Pasdaran Ave Teheran Phone +98 / 21/ 86 28 19 Telefax +98 / 21/ 85 44 81 Israel ETA Engineering Ltd P.O Box 890 Ramat-Gan 52108 18 Tushia St Phone +972 / / 24 19 45 Telefax +972 / / 62 84 75 Italy EagleBurgmann Italia s.r.l Viale Martiri della Liberazione, 12 I-23875 Osnago (LC) Phone +39 / 039 / 95 22 501 Telefax +39 / 039 / 928 94 83 BT-Burgmann S.P.A Via Meucci, 58 I-36057 Arcugnano (Vi) Phone +39 / 0444 / 28 89 77 Telefax +39 / 0444 / 28 86 93 Japan Eagle Industry Co., Ltd General Industry Overseas Sales Dept Marketing & Sales Division 1-12-15, Shiba-Daimon, Minato-ku Tokyo, 105-8587 Phone +81/ / 3432-4771 Telefax +81/ / 3438-2370 Jordan Eman Essa Trading Est P.O Box 840067 Amman 11180 Phone +96 / 279 / 57 66 92 Telefax +96 / 265 / 66 55 96 Kazachstan Globe Interstar Furmanova Street 240, Office 050059 Almaty Phone +7 / 327 / 264 34 86 Telefax +7 / 327 / 264 33 82 Korea EagleBurgmann Korea Co Ltd 541, Suwolam-Ri, Seotan-Myon Pyongtaek-Si, Kyongki-Do, -451-850-, Pyongtaek Yosu Busan Daegu Phone +82 / 31/ 664-40 95 Telefax +82 / 31/ 664-40 94 Branch Offices: Ulsan Kuwait Dan Trading & Contracting Co W.L.L P.O Box 5092 13051 Safat, Kuwait Phone +965 / 43 25 53 Telefax +965 / 43 78 33 Latvia Filter SIA Aizkraukles 21 0069 Riga Phone +00371 7801 921 Telefax +00371 7550 224 Libya United Technical & Engineering Miseran St P.O Box 81 276 Tripoli G.S.P.L.A.J Phone +21 21 4442 641 Telefax +21 21 4776 52 Lithuania Dmitri Melnikow Balandziu - LT-91 88 Klaipeda Phone / Fax +370 46 31 29 49 Mobile +370 69 82 27 Malaysia EagleBurgmann (Malaysia) Sdn Bhd No 7, Lorong SS13, B Off Jalan SS13/6 Subang Jaya Industrial Estate 47500 Petaling Jaya Phone +60 / / 56 34 86 24 Telefax +60 / / 56 34 97 42 Mexico EagleBurgmann Mexico S.A de C.V Calzada de Guadalupe Num 350-6, Col El Cerrito C.P 54720, Cuautitlán Izcalli, Estado de México, Mexico City Phone +52 / 55 / 58 72 53 93 Telefax +52 / 55 / 58 72 64 93 Morocco Petro-Mat Angle Rue Michel de l'Hôpital et Rue Jules Cesar Casablanca 05 Phone +212 / 240 / 87 99 Telefax +212 / 240 /19 39 Netherlands EagleBurgmann Netherlands B.V Koningsschot NL-3905 PP Veenendaal Phone +31/ 318 / 54 20 00 Telefax +31/ 318 / 54 15 35 New Zealand EagleBurgmann New Zealand Ltd P.O Box 34285, Birkenhead, Parity Place, Glenfield, Auckland Phone +64 / / 43 57 72 Telefax +64 / / 41 27 66 Nigeria Sealing Engineering Services Ltd 82 St Finbarr's College Road Akoka / Yaba, Lagos Phone +234 /1/ 82 59 09 Telefax +234 /1/ 82 59 09 Norway EagleBurgmann Norway AS P.O Box 43 Industriveien 25 D N-2021 Skedsmokorset Phone +47 / 64 / 83 75 50 Telefax +47 / 64 / 83 75 75 Oman Overseas Petroleum Equipment Co L.L.C P.O Box 261, Hamriya Postal Code 131, Sultanate of Oman Phone +968 / 60 21 82 Telefax +968 / 60 20 84 Pakistan Azif Asim Associates Suit #02, 1st Floor, Sameer plaza Civic Center, 3-C1 Faisal Town 54660 Lahore, Pakistan Phone +92 / 42 / 111 585 Telefax +92 / 42 / 516 83 44 Techno-Mech Pakistan 51-A/ , Rehmanpura, Ferozpur Road 54660 Lahore, Pakistan Phone +92 / 42 / 757 5671 Telefax +92 / 42 / 759 7373 Peru Corporación Gamma S.A.C Av La Marina 1321, San Miguel Lima - Peru Phone +51/12 / 63 76 70 Telefax +51/12 / 63 02 86 Philippines Burgmann (Philippines) Inc No 9769 National Road, Maduya Carmona, Cavite Phone +63 / 49 / 39 06 55 Telefax +63 / 49 / 39 06 54 Poland KE-Burgmann Polska Spólka z.o.o Al Jerozolimskie 200 PL-02-486 Warszawa Phone +48 22 535 00 Telefax +48 22 535 48 Portugal EagleBurgmann Ibérica S.A Avda de Quitapesares, 40 E-28670 Villaviciosa de Odón, Madrid Phone +34-91-616 66 01 Telefax +34-91-616 66 81 Qatar Jaidah Motors and Trading Co P.O.Box 150 Doha / Qatar / Arabian Gulf Phone +974 / 68 21 82 Telefax +974 / 41 41 00 Romania EagleBurgmann RO S.R.L Bdul Iuliu Maniu, Nr Cladirea E, Parter, Hala 3, Sector RO-061072 Bucuresti Tel +40 / 314 25 09 09 Telefax +40 / 31 25 09 10 Russia EagleBurgmann OOO ul Zheleznodorozhnaya, , str 45 606524 Zavolzhye Gorodetsky district, Nizhny Novgorod region Phone +7 / 831 / 93 05 58 Telefax +7 / 831 / 93 05 59 Moscow Representation Ul Novotcheremuschkinskaja 61 RF-117418 Moskau Phone +7 / 095 / 97 20 14 Telefax +7 / 095 / 97 20 78 Saudi Arabia Burgmann Saudi Arabia Limited PO box No 3422, Dammam Port Road Dammam, Saudi Arabia Phone +96 / 63 / 59 91 19 Telefax +96 / 63 / 59 92 29 Gas Arabian Services Est P.O.Box 3422 Dammam 31471, King Saud Street Kingdom of Saudi Arabia Phone +96 / 63 / 35 15 00 Telefax +96 / 63 / 32 28 22 Singapore EagleBurgmann Singapore Pte Ltd 52 Serangoon North Avenue 4, #03-02 Ever Tech Building 555853 Singapore Phone +65 / 64 81 34 39 Telefax +65 / 64 81 39 34 EBI Asia Pacific Pte Ltd 29 International Business Park, Acer Blg, Tower B, #03-03 609923 Singapore Phone+65 / 65 65 66 23 Telefax +65 / 65 65 96 63 KE-Burgmann Singapore Pte Ltd Expansion Joints Blk Pioneer Road North No 01-51, Singapore 628459 Phone +65 / 62 61 85 81 Telefax +65 / 62 61 85 89 Slovenia (CRO, BIH, MAC, YU) Branch Office Slovenia Malci Beliceve 37 SLO-1000 Ljubljana Phone +386 / 1/ 23 15 57 Telefax +386 / / 57 40 57 Mobile +386 / 41 / 66 13 15 Slowakian Republic EagleBurgmann Czech s.r.o Na Drahach 1364 CZ-15600 Praha Zbraslav Phone +420 / / 57 92 05 05 Telefax +420 / / 57 92 05 08 Technosam s.r.o Galvaniho 2/A SK-82104 Bratislava Phone +421 / / 43 41 35 85 Telefax +421 / / 43 41 36 03 South Africa EagleBurgmann Seals South Africa (PTY.) LTD Brunton Circle Founders View South, Modderfontein Johannesburg 2065, Gauteng, R.S.A Phone +27 /11/ 57 90 00 Telefax +27 /11/ 09 16 06 Postal adress: P.O Box 1210, Edenvale 1610, R.S.A Also responsible for: Namibia, Botswana, Swaziland, Zambia, Zimbabwe, Mozambique, Mauritius, Congo, Ethiopia, Uganda, Tanzania Spain EagleBurgmann Ibérica S.A Avda de Quitapesares, 40 E-28670 Villaviciosa de Odón, Madrid Phone +34-91-616 66 01 Telefax +34-91-616 66 81 Sweden EagleBurgmann Sweden AB Svärmaregatan S-60361 Norrköping Phone +46 / 1 / 00 05 Telefax +46 / 1 / 00 EagleBurgmann Sweden AB Göteborg Office Askims Verkstadsväg S-436 34 Askim, Göteborg Phone +46 / 31 / 58 68 50 Telefax +46 / 31 / 58 66 Postal adress: Box 91 01 , 40093 Göteborg Switzerland EagleBurgmann (Switzerland) AG Hofstrasse 21, CH-8181 Höri Phone +41 / 44 / 60 88 00 Telefax +41/ 44 / 61 01 35 Taiwan EagleBurgmann Taiwan Co Ltd 1F No 7, Lane 44 Chi Lin Rd Taipei Taiwan, R.O.C Phone +886 -2- 2581 0040 Telefax +886 -2- 2523 2793 Thailand EagleBurgmann (Thailand) Co Ltd Banga Tower C, Floor 18th 40/14 Moo 12 Banga-Trad Rd Km 6.5 Bangkaew, Bangplee Samutprakarn 10540 Phone +66 / / 51 96 21 Telefax +66 / / 51 96 28 Trinidad Eswil Equipment & Supply (W.I.) Ltd 10 - 16 Lady Hailes Avenue San Fernando, Trinidad, W I P.O Box 3585, La Romaine Trinidad, W I Phone +1/ 868 / 57 88 38 Telefax +1/ 868 / 52 90 02 Tunisia Indus Serv S.A.R.L 69 Rue Houcine Bouzaiene Apt N°4, éme Etage 1001 Tunis Phone +216 / 71 / 337 215 Telefax +216 / 71 / 337 214 Turkey EagleBurgmann Endüstryiel Sýzdýrmazlýk San Ve Tic Ltd Sti S.S ístanbul Kimya Sanayiciler Toplu íỵyeri Yapý Kooperatifi E Blok No TR-81720 Tepeören-Tuzla/Istanbul Phone +90 / 216 / 93 02 93 Telefax +90 / 216 / 93 02 98 Turkmenistan Globe Interstar Andaliba Street 82 7401 Ashgabat Phone +993 / / 47 73 24 Telefax +993 / / 47 73 25 Ukraine IRT-Technogerm Ul Komsomolskaja, 130 40009 Sumy Phone +380 542 610 324 Telefax +380 542 610 326 United Arab Emirates EagleBurgmann Middle East FZE P.O Box 61310 Jebel Ali Free Zone Dubai Phone +971/ / 83 88 41 Telefax +971/ / 83 88 43 Uruguay Bilpa S.A Casilla Correo 889 Código Postal 11800 Santa Fé, 1.131 - Montevidéo- UY Phone +598 / / 29 33 43 Telefax +598 / / 29 06 87 USA EagleBurgmann Industries LP 10035 Brookriver Dr Houston, Texas 77040 Phone +1/ 713 / 39 95 15 Telefax +1/ 713 / 39 90 91 KE-Burgmann USA Inc 2100 Conner Road Hebron, Kentucky 41018 Phone +1 / 859 / 746 0091 Telefax +1 / 859 / 746 0094 Uzbekistan Globe Interstar Nukus Str 13 / 100015 Tashkent Phone +998 / 71 / 133 39 58 Telefax +998 / 71 / 133 49 74 Venezuela EagleBurgmann de Venezuela C A Calle Calle 9, Edif Fant Piso Zona Industrial La Urbina 070 Caracas Phone +58 / 212 / 42 15 48 Telefax +58 / 212 / 42 45 44 Vietnam Bavico Ltd 97A Ly Tu Trong Street, District Ho Chi Minh City, Vietnam Phone +84 / / 24 30 46 Telefax +84 / / 22 35 82 Burgmann Industries GmbH & Co KG Äußere Sauerlacher Str 6–10 D-82515 Wolfratshausen Phone +49(0)8171 / 23-0 Telefax +49(0)8171 / 23-1214 www.eagleburgmann.com All technical specifications are based on extensive tests and our many years of experience The diversity of possible applications means, however, that they can serve only as guide values We must be notified of the exact conditions of application before we can provide any guarantee for a specific case Subject to change 50E / E5 / 3.000 / 05.08 / 9.1.1 © 2008 EagleBurgmann Marketing Communications Germany Argentina EagleBurgmann Argentina Catalina M de Boyle, 3117 (Calle 28) San Martin - Buenos Aires Phone +54 11 47 54 63 50 Fax +54 11 47 54 63 73 ... dismantling the entire rotating unit of the pressure-grinding machine (shaft, grinding stone, bearings and seal), resulting in at least three days of lost production, including shutting down and. .. sealing technology in the pulp and paper industry Worldwide demand for paper and paperboard in 2005 was about 360 million tons and is likely to grow to about 500 million tons by 2020 The pulp and. .. the individual setting and monitoring of pressure and flow rate at the seal 16 The costs of water and sealing water management have become increasingly important issues in the paper and pulp industry