... Comparison of Controllers Based on Standard and
Adaptive Dual Approaches 72
7. DUAL MODEL REFERENCE ADAPTIVE CONTROL (MRAC) 75
7.1. Formulation of the Bicriterial Synthesis Problem for Dual MRAC ... 75
7.2. Design of Dual MRAC (DMRAC) 78
7.3. Controller for Nonminimum Phase Plants 80
7.4. Standard and Dual MRAC Schemes (DMRAC) 81
7.5. Simulations and Comparisons 82
8....
... single and
multi-carrier and follow up with analytical and practical aspects of time
domain equalization. Then, frequency domain equalization and echo
cancellation are discussed in sections 3 and ... residual ISI and noise power. In both MSE-DFE
and ZF-DFE we intend to minimize the error term at the input of the slicer,
which in the absence of error propagation includes residual...
... tool must
withstand do depend on cutting speed and feed and rake angle, and on the work material’s
96 Work and tool materials
Fig. 3.17 Machining characterisitcs of a low alloy (•) and a semi-free-cutting ... (manufacturing systems) and
in the cutting edges themselves (materials technology). Each new improvement in one area
2 Introduction
Fig. 1.2 (a) Typical accuracy and finish...
... Computational and Applied Mathematics 121 (2000) 421–464
www.elsevier.nl/locate/cam
Interval analysis: theory and applications
Gotz Alefeld
a; ∗
,G
unter Mayer
b
a
Institut f
ur Angewandte Mathematik, ... Krawczyk’s method is well deÿned and x
∗
∈[x]
k
;k¿0.
If on the other hand f(x) = 0 and K[x]
k
∩ [x]
k
= ∅ then {[x]
k
} is well deÿned. Because of
(B) ¡ 1 we have d[x]
k...
. for both hypotheses (de Groot and
Nas, 1991; Lambert, 1958).
Dual- coding theory explains the coexistence of in-
dependent and interdependent phenomena. connected structures. The general dual- coding
theory hypothesizes that human represents language
with dual systems the verbal system and the im-
agery system.
... (
m)
P
value
=5.580e-001
Figure 5. Comparison of the lognormal distribution fits over DS4 and DS9 (a) and over DS1 and DS4 (b)
Theory and Applications of Monte Carlo Simulations18
Datasets DS1 DS2 DS3 DS4 DS5 DS6 ... as input
Theory and Applications of Monte Carlo Simulations10
is the procedures to find the CDF, PDF, the maximum likelihood measure, the negative log-
likeli...
... computer-
controlled hoists, robots and other material handling devices such that the transportation
and setup operation times are significant and should not be ignored. Robots have become a
standard ... (1992), Lei (1993), Kats and
Levner (1997a, 1997b), Hall (1999), Crama et al. (2000), Agnetis and Pacciarelli (2000),
Dawande et al. (2005, 2007)), and in communications and...