... integration into heterojunction silicon wafer solar cells and subsequently the modelling of heterojunction and hybrid heterojunction silicon wafer solar cells that utilize these films Three key ... monocrystalline/multicrystalline solar cells, thin- film solar cells, organic solar cells, tandem cells, concentrator cells and varying choice of mat...
... 2006 Acquisition and analysis of Langmuir probe characterization for ECR plasma Indian J Phys 80: 1011–1015 Jain S K, Jain A, Hannurkar P R, Kotaiah S 2007 Characterization of plasma parameter, ... distance for (a) mirror magnetic field, and (b) flat magnetic field the magnetic field can cause diffusion of the plasma particles to the wall of the plasma ch...
... focuses on the design, synthesis, and characterization of polymeric materials for energy storage applications, which include small molecule electrolyte additives, solid polymer electrolyte, and gel ... numbers of other synthetic polymers were developed and commercialized in response to the growing need for new materials in the automotive and aerospace indu...
... structure for memory application Results of the present study may enhance our understanding of the application of organic and polymer materials to the organic memory device and it may also contribute ... observed from a lot of organic/ polymer materials based device since 1960s, none of the devices based on these materials can fulfill all the requireme...
... on working electrodes made of highly ordered anodic titanium oxide nanotube arrays of varied tube length directly formed on Ti foil The lengths of these ATO NT were controlled from to 41 µm while ... Because of the robust structure of the NT arrays and the loose structure of the surface debris, the unwanted deposits on the ATO surface Anodic TiO2 Nanotube Arra...
... processing of large-scale graphene Nat Nanotech 2009, 4:25-29 doi:10.1186/1556-276X-7-53 Cite this article as: Kim et al.: Fabrication and characterization of carbon-based counter electrodes prepared by ... graphene, SWNTs, and graphene-SWNT composites could perform sufficiently well as counter electrodes for DSSCs Figure Nyquist plot of DSSCs Nyquist plot of D...
... processing of large-scale graphene Nat Nanotech 2009, 4:25-29 doi:10.1186/1556-276X-7-53 Cite this article as: Kim et al.: Fabrication and characterization of carbon-based counter electrodes prepared by ... graphene, SWNTs, and graphene-SWNT composites could perform sufficiently well as counter electrodes for DSSCs Figure Nyquist plot of DSSCs Nyquist plot of D...
... Fabrication and characterization of well-aligned and ultra-sharp silicon nanotip array Chi-Chang Wu*1,2, Keng-Liang Ou1,2, and Ching-Li Tseng1 Graduate Institute of Biomedical Materials and ... process, and the exposed silicon substrate is etched away to form the nanotip The field emission property of the ultra-sharp nanotip is measured, and the turn-on f...
... photomicrographs of fresh and modified fly ash (A and B) SEM of fresh fly ash at 1,000 and 2,500 times magnification, (C and D) SEM of ball milled fly ash for 20 h at 1,000 and 3,000 times magnification, (E and ... 10:1 ratio of balls to fly ash and milling chamber and balls were of tungsten carbide, the ball diameter was 10 mm Toluene was used as the medium with an an...
... LARGE AREA PLASMONIC NANOSTRUCTURES DESIGN, FABRICATION AND CHARACTERIZATION BY LASER XU LE (M Eng, Xi'an Jiaotong University) A THESIS ... thesis aims to design and fabricate desirable nanostructures over a large area by low-cost and flexible nanofabrication methods to accomplish and improve sensing sensitivities of plasmonic bio/chemical ... the design a...
... FABRICATION AND CHARACTERISATION OF SOLID- PHASE CRYSTALLISED PLASMADEPOSITED SILICON THIN FILMS ON GLASS FOR PHOTOVOLTAIC APPLICATIONS AVISHEK KUMAR (B.Eng., MSc-Microelectronics) A ... of silicon and hydrogen, both of which are non-toxic and present in great abundance on earth SPC poly-Si is formed from amorphous silicon (a-Si) by a standard process...
... control and manipulate terahertz waves 1.4 Organization of thesis This thesis is directed towards to the design, fabrication, and characterization of terahertz metamaterials in 2D and 3D forms and ... Tunable and Broadband Terahertz Metamaterials: Design, Fabrication, and Characterization 66 5.1 Structurally tunable metamaterials 66 5.2 2D hybrid terah...
... energy bandgap, and high electron mobility High electron mobility transistors (HEMTs) employing the AlGaN/GaN heterostructure further exploit the high electron mobility in the two-dimensional electron ... Abstract Fabrication and Characterization of Advanced AlGaN/GaN High- Electron- Mobility Transistors by LIU Xinke Doctor of Philosophy − Electrical...
... FABRICATION AND CHARACTERIZATION OF GERMANIUM PHOTODETECTORS WANG JIAN B Sci (Peking University, P R China) 2006 A THESIS SUBMITTED FOR THE DEGREE OF DOCTOR OF PHILOSOPHY DEPARTMENT OF ELECTRICAL ... due to its ease of process Due to the bandwidth-efficiency tradeoff, typical NI incidence Ge photodetectors offer moderate quantum efficiencies and bandwidths Among the re...
... Comparison of separation performance for hollow fiber membranes between the O2/N2 mixed gas and pure gas measurements……… … 245 Table B.3 Comparison of separation performance for hollow fiber membranes ... FABRICATION AND CHARACTERIZATION OF COMPOSITE MEMBRANES FOR GAS SEPARATION JIANG LANYING (B Sci., Wuhan University, P R China) A THESIS SUBMITTED FOR...