...
Industrial Single Furnace Direct-to -Copper Smelting
Chemistry
Industrial Details
Control
Cu-in-Slag: Comparison with Conventional Matte
SmeltingiConverting
Cu-in-Slag Limitation of Direct-to -Copper ...
Second edition
1980
Third edition 1994
Fourth edition
2002
British Library Cataloguing in Publication Data
Davenport,
W.
G.
(William George)
Extractive metallurgy
of...
...
Extractive Metallurgy
of
Copper
16
Extractive Metallurgy
of
Copper
Electrochemical processing is always used in producing high-purity copper:
electrorefining in the case of pyrometallurgical ... Corp., New York,
NY.
Copper Development Association (2002) Copper and copper alloy consumption in the
United States by functional use
-
19 97. www .copper. org...
...
provided by high-velocity
air-pulp flow
(-1 7
mkecond) in the downcomers. Settling
of
non-Cu minerals
is
done in
the body
of
the cell. Washing
of
the froth
is
done by water falling ...
Cutaway view of hydrocyclone showing tangential input of water-ore particle
feed and separation into fine particle and coarse particle fractions. The cut between fine
particles and...
... pass
others
bed 1
bed 2
bed 3
bed 4
bed
5
Catalyst
bed
1
Converter diameter, m
Thickness
of
catalyst beds,
m
bed 2
bed
3
bed 4
bed
5
Gas into converter
flowrate, Nm3/minute ... neutralized and
either stored or treated for metal recovery (Terayama
et
al. ,
1981; Inami
et
a1.,1990; Trickett 1991, Newman
et
al. ,
1999). Fig. 14.3 shows the Toyo
smelter’s flow...
... until its S-in -copper is lowered to
-0 .002%
molten copper bath.
Hydrocarbon blowing is terminated when the 0-in-molten copper concentration
has been lowered to
-0 .15%
0
(as detected with disposable ... PA, 3 76 .
Electro-nite (2002) www.electro-nite.com (Products, Copper)
Engh, T.A. (1992)
Principles of Metal Refining.
Oxford University Press, 52 and 422
www.ou...
... W. G. (1980)
Extractive Metallurgy
of
Copper,
2"d
Edition,
Pergamon Press, New York, NY.
Biswas, A.K. and Davenport, W. G. (1994)
Extractive Metallurgy
of
Copper,
3rd
Edition,
Elsevier ... Warrendale, PA, 1 97 212.
Biswas, A.K. and Davenport, W. G. (1980)
Extractive Metallurgy
of
Copper
Zfld
Edition,
Pergamon Press, New York, NY.
Biswas, A.K. and...