Tài liệu Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements pdf

8 357 0
Tài liệu Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements pdf

Đang tải... (xem toàn văn)

Thông tin tài liệu

Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements Classroom Requirements This course requires a classroom with a minimum of one computer for the instructor and one for each student. Before class begins, install and configure all computers by using the following information and instructions. In addition to computing equipment, the classroom will need to be equipped with a flip chart with refill paper, several marking pens, and several packets of 3 x 3 or larger self-stick notes. Instructor Computer The instructor computer requires the following hardware and software configuration. Hardware The following hardware is the minimum required for the instructor computer: Pentium Pro or Pentium II 200 microprocessor PCI 2.1 bus 128 megabytes (MB) of RAM 4-gigabyte (GB) hard disk 256K L2 Cache 12X CD-ROM drive Network adapter 4-MB video adapter Super VGA (SVGA) monitor (17-inch minimum) Microsoft ® Mouse or compatible pointing device Sound card with amplified speakers Internet access Projection display device that supports SVGA 800 x 600, 256-colors Software The following software is required for the instructor computer: Note 2 Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements Microsoft Windows ® 98 Microsoft Internet Explorer 5.0 Microsoft Word 97 or later Microsoft PowerPoint ® 97 or later You may substitute Windows 98 with Windows 95, Microsoft Windows NT ® Workstation 4.0, Windows NT 4.0 Server, or Windows 2000, provided that all classroom machines are configured to permit file sharing. Student Computer Each student computer requires the following hardware and software configuration. Hardware The following hardware is required for each student computer: Pentium 133 32 MB of RAM 2-GB hard disk CD-ROM drive Network adapter 4-MB video adapter SVGA monitor (15-inch minimum) Microsoft Mouse or compatible pointing device Internet access Software The following software is required for each student computer: Windows 98 Internet Explorer 5.0 Word 97 or later Note Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements 3 Classroom Configuration The following configuration and naming conventions are used throughout this course and are required for the hands-on labs: Each computer is configured as a member of the WORKGROUP workgroup. The instructor computer is named Instructorx (where x is a number that is unique to the intranet). Student machines are named Studentx (where x is a unique number for each computer on the intranet). If your classroom is on an intranet, make sure that the numbers that you assign to each instructor computer, student computer, domain, and so on, are unique. By providing unique numbers, you will avoid causing naming conflicts. Setup Instructions Use the following procedures to prepare each computer for class. Before You Begin You will need to do the following: Read through all setup procedures. Make sure that you have the Instructor compact disc that is provided with the course materials. Estimated time to set up the classroom: 4 hours Instructor Computer Setup Use the following instructions to set up the instructor computer. To set up the hardware Set up the hardware according to the manufacturer’s instructions. (Refer to the hardware requirements.) Configure the hard disk as follows: Format drive C with a file allocation table (FAT) or NTFS file system partition size of at least 1.0 GB. Importan t 4 Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements To install and configure Microsoft Windows 98 Run the setup executable file. Use the following table to guide operating system setup. Respond to all other installation prompts by using defaults or with options appropriate to the computer or your training facility. When this information is required Use Enter computer name Instructor Workgroup Workgroup User name and password Leave blank If an operating system other than Windows 98 is used, leave the Administrator password blank. To set the display properties Use the Display control panel to set the screen area to 800 x 600 pixels and the number of colors to 256 or higher. To install and configure Internet Explorer 5.0 Install from the Instructor CD. Run the setup executable file and install by using default options. When installation is complete, launch Internet Explorer to run the Internet Connection Wizard. If you use a proxy server, be sure to set Internet Explorer to bypass proxy server for local addresses. To install and configure Microsoft Word 97 or higher Install from either a stand-alone or Microsoft Office version. Run the setup executable file and install by using default options. To install and configure PowerPoint viewer Run the setup executable file from the Instructor CD and install by using default options. To install fonts for the PowerPoint presentation After inserting the Instructor compact disc into the CD-ROM drive, double- click My Computer. Right-click the CD-ROM drive icon and on the shortcut menu, click Explore. Double-click the Fonts folder. Double-click Mocfonts.exe. Follow the on-screen prompts to install the fonts. Click OK when you have finished installing all of the fonts. Note Note Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements 5 Student Computer Setup Use the following instructions to set up each student computer. To set up the hardware Set up the hardware according to the manufacturer’s instructions. (Refer to the hardware requirements.) To install and configure Microsoft Windows 98 Run the setup executable file. Use the following table to guide operating system setup. Respond to all other installation prompts by using defaults or with options appropriate to the computer or your training facility. When this information is required Use Enter computer name Student Workgroup Workgroup User name and password Leave blank To set the display properties Use the Display control panel to set the screen area to 800 x 600 pixels and the number of colors to 256 or higher. To install and configure Internet Explorer 5.0 Install from the Instructor CD. Run the setup executable file and install by using default options. When installation is complete, launch Internet Explorer to run the Internet Connection Wizard. If you use a proxy server, be sure to set Internet Explorer to bypass proxy server for local addresses. To install and configure Microsoft Word 97 or later Install from either a stand-alone or Microsoft Office version. Run the setup executable file and install by using default options. Note 6 Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements Instructor Compact Disc Contents The Instructor compact disc contains the following files and folders: Autorun.exe. When the CD is inserted into the CD drive or when the autorun.exe file is double-clicked, this autorun executable file opens the CD and allows you to browse the CD, or to install Internet Explorer. Default.htm. This file opens the Instructor Web pages. Readme.txt. This file contains a description of the compact disc’s contents in ASCII format (non-Microsoft Word document). S01_1585.doc. This file is the Classroom Setup Guide. It contains a description of classroom requirements, classroom setup instructions, and the classroom configuration. CD_Student. This folder contains all the files on the Student CD. Errorlog. This folder contains a template that is used to record any errors that you find in the course and how you have corrected those errors. Fonts. This folder contains fonts that are required to view the Microsoft PowerPoint ® presentation and Web-based materials. Htm. This folder contains the Web pages for this CD-ROM. Menu. This folder contains elements for autorun.exe. Powerpnt. This folder contains the PowerPoint slides that are used in this course. Pptview. This folder contains the PowerPoint Viewer, which is used to display the PowerPoint slides. Setup. This folder contains the self-extracting compressed files for easy installation of the supporting files for this course. Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements 7 Student Compact Disc Contents The Student compact disc contains the following files and folders: Autorun.exe. When the CD is inserted into the CD drive or when the autorun.exe file is double-clicked, this autorun executable file opens the CD and allows you to browse the CD, or to install Internet Explorer. Default.htm. This file opens the Web pages. It provides students with resources pertaining to this course. Readme.txt. This file contains a description of the compact disc’s contents in ASCII format (non-Microsoft Word document). S01_1585.doc. This file is the Classroom Setup Guide. It contains a description of classroom requirements, classroom setup instructions, and the classroom configuration. Activities. This folder contains the activity files in Word format. AddRead. This folder contains additional reading pertaining to this course. If there are no additional reading files, the AddRead folder does not appear. Htm. This folder contains the Web pages for this CD-ROM. Ie5. This folder contains Microsoft Internet Explorer 5. Media. This folder contains files that are used in multimedia presentations for this course. If this course does not include any multimedia presentations, the Media folder does not appear. Menu. This folder contains elements for autorun.exe. Mplayer. This folder contains files that are required to install Microsoft Windows Media ™ Player. MSF. This folder contains the resource kits for the Microsoft Solutions Framework (MSF) courses. Practices. This folder contains files that are used in the hands-on practices. These files may be used to prepare the student computers for the hands-on practices. If there are no practices, the Practices folder does not appear. SampApps. This folder contains the sample applications associated with this course. If there are no associated sample applications, the SampApps folder does not appear. SampCode. This folder contains sample code that is accessible through the Web pages on the Student CD. If there is no sample code, the SampCode folder does not appear. SampSite. This folder contains files that create the sample site associated with this course. If there is no sample code, the SampSite folder does not appear. Setup. This folder contains the self-extracting compressed files for easy installation of the supporting files for this course. WhitePapers. This folder contains white papers that pertain to this course. WordView. This folder contains the Word Viewer that is used to view any Microsoft Word document (.doc) files included on the compact disc. THIS PAGE INTENTIONALLY LEFT BLANK . Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements Classroom Requirements This course requires a classroom. files for easy installation of the supporting files for this course. Classroom Setup Guide for Course 1585A: Gathering and Analyzing Business Requirements

Ngày đăng: 24/01/2014, 10:20

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan