iec 60079-7 electrical apparatus for explosive gas atmospheres - increased safety ''e''

139 401 0
iec 60079-7 electrical apparatus for explosive gas atmospheres - increased safety ''e''

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Các tiêu chuẩn quốc tế về điện

CE1 60079-7 IEC 60079-7 (Troisième édition - 2001) (Third edition - 2001) Matériel électrique pour atmosphères explosives gazeuses Electrical apparatus for explosive gas atmospheres Partie 7: Sécurité augmentée “e” Part 7: Increased safety “e” - - CORRIGENDUM Page 68 Page 69 Paragraphe 5.7.1.2.7, dernier alinéa Subclause 5.7.1.2.7, last paragraph Au lieu de: p endant l’essai de type de instead of: during the type test of 6.6.3 6.6.3 Lire: p endant l’essai de type de 6.6.4 Read: during the type test of 6.6.4 Page 96 Page 97 6.6.1 6.6.1 Application des essais Application of tests Au lieu de: les prescriptions complémentaires de 5.7s’appliquent instead of: the additional requirements of 5.7apply Lire: les prescriptions complémentaires de 5.7.1s’appliquent 5.7.1apply Read: the additional requirements of ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Février 2004 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS February 2004 Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST NORME INTERNATIONALE INTERNATIONAL STANDARD CE1 IEC 60079-7 Troicièm e édit ion Third edition 2001 -1 Matériel électrique pour atmosphères explosives gazeuses Partie 7: Sécurité augmentée «e» Electrical apparatus for explosive gas atmospheres - Numéro de référence Reference number ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Part 7: Increased safety "e" CEIIIEC 60079-7:2001 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Numérotation des publications Publication numbering Depuis le l e r janvier 1997, les publications de la CE1 sont numérotées partir de 60000 Ainsi, la CE1 34-1 devient la CE1 60034-1 As from January 1997 all IEC publications are issued with a designation in the 60000 series For example, IEC 34-1 is now referred to as IEC 60034-1 Editions consolidées Consolidated editions Les versions consolidées de certaines publications de la CE1 incorporant les amendements sont disponibles Par exemple, les numéros d’édition 1.O, 1.Iet 1.2 indiquent respectivement la publication de base, la publication de base incorporant l’amendement 1, et la publication de base incorporant les amendements et The IEC is now publishing consolidated versions of its publications For example, edition numbers 1.O, 1.I and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment and the base publication incorporating amendments and Informations supplémentaires sur les publications de la CE1 Further information on IEC publications Le contenu technique des publications de la CE1 est constamment revu par la CE1 afin qu’il reflète l’état actuel de la technique Des renseignements relatifs cette publication, y compris sa validité, sont disponibles dans le Catalogue des publications de la CE1 (voir ci-dessous) en plus des nouvelles éditions, amendements et corrigenda Des informations sur les sujets l’étude et l’avancement des travaux entrepris par le comité d’études qui a élaboré cette publication, ainsi que la liste des publications parues, sont également disponibles par l’intermédiaire de: The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: Site web de la CE1 (www.8ec.ch) IEC Web Site (www.iec.ch) Catalogue des publications de la CE1 Catalogue of IEC publications Le catalogue en ligne sur le site web de la CE1 (www.iec.ch/catla-f.htm) vous permet de faire des recherches en utilisant de nombreux critères, comprenant des recherches textuelles, par comité d’études ou date de publication Des informations en ligne sont également disponibles sur les nouvelles publications, les publications remplacées ou retirées, ainsi que sur les corrigenda The on-line catalogue on the IEC web site (www.iec.chlcat8a-e.htm) enables you to search by a variety of criteria including text searches, technical committees and date of publication Online information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda IEC Just Published IEC Just Published Ce résumé des dernières publications parues (www/.iec.ch/JP.htm) est aussi disponible par courrier électronique Veuillez prendre contact avec le Service client (voir ci-dessous) pour plus d’informations This summary of recently issued publications (www.iec.ch/JP.htm) is also available by email Please contact the Customer Service Centre (see below) for further information Service clients Customer Service Centre Si vous avez des questions au sujet de cette publication ou avez besoin de renseignements supplémentaires, prenez contact avec le Service clients: If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custser\r@.iec.ch TéI: +41 22 919 02 11 Fax: +41 22 919 03 O0 Email: custserv@.iec,ch Tel: +41 22 91 02 11 Fax: +41 22 919 03 O0 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST NORME INTERNATIONALE CE1 IEC 60079-7 INTERNATIONAL STANDARD Troicièm e édit ion Third edition 2001 -1 ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Matériel électrique pour atmosphères explosives gazeuses Partie 7: Sécurité augmentée «e» Electrical apparatus for explosive gas atmospheres Part 7: Increased safety "e" O IEC 2001 Droits de reproduction réservés Aucune partie de cette publication ne peut être reproduite ni utilis4e sous quelque forme que ce soit et par aucun proc4d4, 4lectronique ou m4canique, y compris la photocopie et les microfilms, sans l'accord 4crit de 1'4diteur - Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch Commission Electrotechnique Internationale International Electrotechnical Commission M e m n v H a p o n H a R ~ ~ ~ K T P O T ~ X H HHOMHCCMR ~ ~ C H ~ R O Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST CODE PRIX PRICECODE XB Pourprix, voir catalogue en vigueur Forprice, see current catalogue -2- 60079-7 O CEI:2001 SOMMAIRE ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - AVANT-PROPOS Domaine d’application Références normatives Définitions 12 Prescriptions de construction pour tous les matériels électriques 24 4.1 Généralités 4.2 Eléments de raccordement aux circuits extérieurs 4.3 Connexions internes 4.4 Distances d’isolement 4.5 Lignes de fuite 4.6 Matériaux isolants électriques solides 4.7 Enroulements 4.8 Limites de température 4.9 Câblage interne au matériel 4.1 O Degrés de protection procurés par les enveloppes 4.11 Fermetures Prescriptions complémentaires pour des matériels électriques spécifiques 24 24 26 26 36 38 38 40 42 42 44 44 Généralités Machines électriques tournantes Luminaires raccordés un réseau Lampes portables source d’alimentation autonome pour applications du groupe II Appareils de mesure et transformateurs de mesure Transformateurs autres que les transformateurs de mesure Batteries 44 44 56 5.1 5.2 5.3 5.4 5.5 5.6 5.7 64 64 66 66 5.8 Coffrets de raccordement et de jonction d’usage général 82 5.9 Eléments de chauffage par rộsistance (autre quun chauffage par traỗage) 82 5.1O Autres matériels électriques 86 Vérifications de type et essais de type 86 6.1 Rigidité diélectrique 86 6.2 Machines électriques tournantes 88 90 6.3 Luminaires raccordés un réseau 6.4 Appareils de mesure et transformateurs de mesure 94 6.5 Transformateurs autres que les transformateurs de mesure 96 6.6 Accumulateurs 96 6.7 Coffrets de raccordement et de jonction d’usage général 102 6.8 Eléments de chauffage par résistance et unités de chauffage par résistance 102 104 6.9 Essais des matériaux isolants des bornes Vérifications et essais de série 106 Marquage et instructions 108 Marquage général Instructions d‘utilisation Instructions d’installation 108 108 110 8.1 8.2 8.3 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST 60079-7 O IEC:2001 -3- CONTENTS FOREWORD Scope Normative references 13 Constructional requirements for all electrical apparatus 25 4.1 General 4.2 Terminals for external connections 4.3 Internal connections 4.4 Clearances 4.5 Creepage distances 4.6 Solid electrical insulating materials 4.7 Windings 4.8 Temperature limitations 4.9 Wiring internal to apparatus 4.10 Degrees of protection provided by enclosures 4.11 Fasteners Supplementary requirements for specific electrical apparatus 25 25 27 27 37 39 39 41 43 43 45 45 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.1O Type General 45 Rotating electrical machines 45 57 Luminaires designed for mains supply Portable lights with their own source of supply for group II applications 65 Measuring instruments and instrument transformers 65 Transformers other than instrument transformers 67 Batteries 67 General purpose connection and junction boxes 83 Resistance heaters (other than trace heating) 83 Other electrical apparatus 87 verifications and type tests 87 6.1 Dielectric strength 6.2 Rotating electrical machines 6.3 Luminaires designed for mains supply 6.4 Measuring instruments and instrument transformers 6.5 Transformers other than instrument transformers 6.6 Secondary batteries 6.7 General purpose connection and junction boxes 6.8 Resistance heating devices and resistance heating units 6.9 Terminal insulating material tests Routine verifications and routine tests 87 89 91 95 97 97 103 103 105 107 Marking and instructions 109 General marking Instructions for use Installation instructions 109 109 111 8.1 8.2 8.3 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Definitions -4- 60079-7 O CEI:2001 ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Annexe A (normative) Moteurs cage Méthodes d’essais et de calculs 112 Annexe B (normative) Essais de type pour des constructions particulières d’éléments de chauffage par résistance ou d’unités de chauffage par résistance 116 Annexe C (informative) Moteurs cage Protection thermique en service 120 Annexe D (informative) Eléments et unités de chauffage par résistance Protection électrique additionnelle 122 Annexe E (informative) Combinaisons de bornes et de conducteurs pour les boitiers de raccordement et de jonction usage général 124 Annexe F (informative) Les dimensions des conducteurs en cuivre 126 Bibliographie 128 Figure Parties d’un élément 16 Détermination des lignes de fuite et distances d’isolement Figure 36 Figure Valeurs minimales de la durée fE des moteurs en fonction du rapport du courant de démarrage IA/IN 50 Figure Disposition pour l’essai aux vibrations du luminaire 94 Figure A.l Diagramme illustrant la détermination de la durée tE 114 Tableau Lignes de fuite et distance d’isolement 28 Tableau Résistance au cheminement des matériaux isolants 36 Tableau Températures limites pour enroulements isolés 42 Evaluation des risques potentiels d’étincelles de I’entrefer pour les facteurs Tableau de risque l’allumage des rotors cage 48 Evaluation des risques potentiels de décharge des enroulements de stator Tableau Facteurs de risque d’allumage 56 Tableau Distance minimale entre la lampe et le verre protecteur 58 Lignes de fuite et distances d’isolement pour culots de lampe vis 58 Tableau Tableau Résistance aux effets des courants de court-circuit 64 Tableau Eléments primaires 78 Tableau 1O Accumulateurs (éléments secondaires) 78 Tableau 11 Couple de serrage et couple minimal de retrait 92 Tableau 12 Valeur pour les essais de décrochage 106 Tableau F l Sections normalisées des conducteurs en cuivre 126 Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST 60079-7 O IEC:2001 -5- Annex A (normative) Cage motors Methods of test and of calculation 113 Annex B (normative) Type tests for specific forms of resistance heating devices or resistance heating units 117 Annex C (informative) Cage motors Thermal protection in service 121 Annex D (informative) Resistance heating devices and units Additional electrical protection 123 Annex E (informative) Combinations of terminals and conductors for general purpose connection and junction boxes 125 Annex F (informative) Dimensions of copper conductors 127 Bibliography 129 Figure Parts of a cell 17 Figure Determination of creepage distances and clearances 37 Figure Minimum values of the time t E of motors in relation to the starting current ratio IA/IN 51 Arrangement for the luminaire vibration test Figure 95 Diagram illustrating the determination of time t~ Figure A l 115 Table Creepage distances and clearances 29 Table Tracking resistance of insulating materials 37 Table Limiting temperatures for insulated windings 43 Table Potential air gap sparking risk assessment for cage rotor ignition risk factors 49 Table Potential stator winding discharge risk assessment Ignition risk factors 57 Table Minimum distance between lamp and protective cover 59 Table Creepage distances and clearances for screw lamp caps 59 Table Resistance to the effect of short-circuit currents 65 Table Primary cells 79 Table 1O Secondary cells 79 Table 11 Insertion torque and minimum removal torque 93 Table 12 Value for pullout tests 107 Table F l Standard cross-sections of copper conductors 127 ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST -6- 60079-7 O CEI:2001 COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE MATÉRIEL ÉLECTRIQUE POUR ATMOSPHÈRES EXPLOSIVES GAZEUSES Partie 7: Sécurité augmentée «e» AVANT-PROPOS La CE1 (Commission Electrotechnique Internationale) est une organisation internationale de normalisation composée de tous les comités électrotechniques nationaux (Comités nationaux de la CE1 ) La CE1 a pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans le domaine de l’électricité et de l’électronique A cet effet, la CEI, entre autres activités, publie des Normes internationales Leur élaboration est confiée des comités d’études, aux travaux desquels tout Comité national intéressé par le sujet traité peut participer Les organisations internationales, gouvernementales et non gouvernementales qui assurent la liaison avec la CE1 participent également cette préparation La CE1 collabore étroitement avec l’Organisation internationale de Normalisation (ISO), selon des conditions fixées par accord entre les deux organisations Les décisions ou accords officiels de la CE1 concernant les questions techniques, représentent, dans la mesure du possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux intéressés sont représentés dans chaque comité d’études Les documents produits se présentent sous la forme de recommandations internationales Ils sont publiés comme normes, spécifications techniques, rapports techniques ou guides et agréés comme tels par les Comités nationaux Dans le but d’encourager l’unification internationale, les Comités nationaux de la CE1 sengagent appliquer de faỗon transparente, dans toute la mesure du possible, les Normes internationales de la CE1 dans leurs normes nationales et régionales Toute divergence entre la norme de la CE1 et la norme nationale ou régionale correspondante doit être indiquée en termes clairs dans cette dernière La CE1 n’a fixé aucune procédure concernant le marquage comme indication d’approbation, et sa responsabilité n’est pas engagée quand un matériel est déclaré conforme l’une de ces normes L’attention est attirée sur le fait que certains éléments de la présente norme internationale peuvent faire l’objet de droits de propriété intellectuelle ou de droits analogues La CE1 ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence La Norme internationale CE1 60079-7 a été établie par le comité d’études 31 de la CEI: Matériel électrique pour atmosphères explosives Cette troisième édition annule et remplace la deuxième édition parue en 1990, son amendement (1991) et l’amendement (1993) Cette troisième édition constitue une révision technique Le texte de la présente norme est issu des documents suivants: FDIS Rapport de vote 31/381/FDIS 3113881RVD Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant abouti l’approbation de la présente norme Les annexes A et B font partie intégrante de la présente norme Les annexes C, D, E et F sont données uniquement titre d’information Le comité a décidé que le contenu de cette publication ne sera pas modifié avant 2004 A cette date, la publication sera reconduite; supprimée; remplacée par une édition révisée, ou amendée ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST 60079-7 O IEC:2001 -7- INTERNATIONAL ELECTROTECHNICAL COMMISSION ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 7: Increased safety "e" FOREWORD The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees) The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields To this end and in addition to other activities, the IEC publishes International Standards Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights The IEC shall not be held responsible for identifying any or all such patent rights International Standard IEC 60079-7 has been prepared by IEC technical committee 31 : Electrical apparatus for explosive atmospheres This third edition cancels and replaces the second edition published in 1990, its amendment (1991) and amendment (1993) This third edition constitutes a technical revision The text of this standard is based on the following documents: FDIS Report on voting 31/381/FDIS 3113881RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table Annexes A and B form an integral part of this standard Annexes C, D, E and F are given for information only The committee has decided that the contents of this publication will remain unchanged until 2004 At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended ``,`,`,,,,`,,,,`,```,``````,`-`-`,,`,,`,`,,` - Copyright International Electrotechnical Commission Provided by IHS under license with IEC No reproduction or networking permitted without license from IHS Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST ... ``,`,`,,,,`,,,,`,```,``````, `-` -` ,,`,,`,`,,` - IEC 6007 9-4 ,Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition tempera ture IEC 6007 9-1 1, Electrical apparatus for explosive gas atmospheres. .. Dabhi/5931917101 Not for Resale, 02/12/2006 05:10:58 MST ``,`,`,,,,`,,,,`,```,``````, `-` -` ,,`,,`,`,,` - 6007 9-7 O IEC: 2001 -9 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 7: Increased safety "e"... connections IEC 6007 9-0 : 1998, Electrical apparatus for explosive gas atmospheres - Part O: General requirements IEC 6007 9-1 ,Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures

Ngày đăng: 25/12/2013, 10:41

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan