Nghiên cứu chế tạo các lớp phủ hydroxyapatit có khả năng tương thích sinh học trên nền vật liệu titan bằng phương pháp sol gel

145 64 0
Nghiên cứu chế tạo các lớp phủ hydroxyapatit có khả năng tương thích sinh học trên nền vật liệu titan bằng phương pháp sol gel

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

F BỘ GIÁO DỤC VÀ ĐÀO TẠO VIỆN HÀN LÂM KHOA HỌC VÀ CÔNG NGHỆ VIỆT NAM HỌC VIỆN KHOA HỌC VÀ CÔNG NGHỆ - NGÔ THỊ ÁNH TUYẾT NGHIÊN CỨU CHẾ TẠO CÁC LỚP PHỦ HYDROXYAPATIT CĨ KHẢ NĂNG TƯƠNG THÍCH SINH HỌC TRÊN NỀN VẬT LIỆU TITAN BẰNG PHƯƠNG PHÁP SOL-GEL LUẬN ÁN TIẾN SĨ KHOA HỌC VẬT LIỆU Hà Nội – 2019 BỘ GIÁO DỤC VÀ ĐÀO TẠO VIỆN HÀN LÂM KHOA HỌC VÀ CÔNG NGHỆ VIỆT NAM HỌC VIỆN KHOA HỌC VÀ CÔNG NGHỆ - Ngô Thị Ánh Tuyết NGHIÊN CỨU CHẾ TẠO CÁC LỚP PHỦ HYDROXYAPATIT CÓ KHẢ NĂNG TƯƠNG THÍCH SINH HỌC TRÊN NỀN VẬT LIỆU TITAN BẰNG PHƯƠNG PHÁP SOL-GEL Chuyên ngành: Kim loại học Mã số: 9.44.01.29 LUẬN ÁN TIẾN SĨ KHOA HỌC VẬT LIỆU NGƯỜI HƯỚNG DẪN KHOA HỌC: TS Nguyễn Ngọc Phong TS Phạm Thi San Hà Nội - 2019 LỜI CAM ĐOAN Tôi xin cam đoan công trình nghiên cứu riêng tơi khơng trùng lặp với cơng trình khoa học khác Các số liệu, kết luận án trung thực, chưa cơng bố tạp chí đến thời điểm ngồi cơng trình tác giả Hà Nội, ngày tháng năm 2019 Tác giả luận án Ngô Thị Ánh Tuyết i LỜI CẢM ƠN! Lời với lòng biết ơn sâu sắc tơi xin gửi lời cảm ơn tới thầy hướng dẫn TS Nguyễn Ngọc Phong TS Phạm Thi San dẫn quý báu định hướng nghiên cứu phương pháp luận tạo điều kiện tốt để tơi hồn thành luận án này! Tôi bày tỏ lời cảm ơn Viện Khoa học Vật liệu, Học viện Khoa học Công nghệ - Viện Hàn lâm Khoa học Công nghệ Việt Nam tạo điều kiện thuận lợi sở vật chất thời gian để tơi hồn thành luận án Tơi đồng thời gửi lời cảm ơn chân thành đến đồng nghiệp Phòng ăn mòn bảo vệ vật liệu, Trung tâm đánh giá hư hỏng vật liệu Comfa, Viện khoa học vật liệu, Viện Hàn lâm Khoa học Công nghệ Việt Nam chia sẻ, đóng góp kinh nghiệm quý báu trợ giúp trang thiết bị để thực nghiên cứu Và xin gửi lời cảm ơn chân thành tới TS.Hiromoto viện Khoa học vật liệu quốc gia Nhật Bản (NIMS) hỗ trợ giúp đỡ tơi nhiều q trình thực luận án Tôi cám ơn đồng nghiệp, bạn bè – người quan tâm, động viên suốt thời gian qua! Cuối cùng, tơi xin dành tình cảm đặc biệt đến gia đình, người thân tơi người động viên tiếp sức cho tơi thêm nghị lực để tơi vững tâm hồn thành luận án Tác giả luận án Ngô Thị Ánh Tuyêt ii MỤC LỤC DANH MỤC HÌNH VẼ viii MỞ ĐẦU CHƯƠNG I TỔNG QUAN 1.1 Giới thiệu vật liệu cấy ghép kim loại 1.1.1 Vật liệu kim loại phân hủy sinh học 10 1.1.2.Vật liệu kim loại vĩnh cửu sinh học 12 1.1.2.1 Thép không gỉ 13 1.1.2.2 Hợp kim Coban 14 1.1.2.3.Vật liệu titan 15 1.2 Các lớp phủ tương thích sinh học 22 1.2.1 Các loại hợp chất tương thích sinh học canxi photphat (Ca-P) .22 1.2.2 Các lớp phủ tương thích sinh học sở HA 24 1.2.2.1 Lớp phủ HA 24 1.1.2.2 Lớp phủ dẫn xuất HA 26 1.2.3 Một số phương pháp chế tạo lớp phủ tương thích sinh học sở HA 27 1.2.3.1 Phương pháp plasma 27 1.2.3.2 Phương pháp phún xạ magnetron 28 1.2.3.3 Phương pháp điện hóa 29 1.2.3.4 Phương pháp điện di 31 1.2.3.5 Phương pháp ngâm y sinh 32 1.2.3.6 Phương pháp Sol-Gel 33 CHƯƠNG II THỰC NGHIỆM VÀ PHƯƠNG PHÁP NGHIÊN CỨU .38 2.1 Thiết bị dụng cụ 38 2.2 Hóa chất vật liệu 38 2.3 Chế tạo lớp phủ HA phương pháp sol-gel 39 2.3.1 Chuẩn bị titan 39 2.3.2 Quy trình chế tạo sol HA FHA 40 2.3.2.1 Quy trình chế tạo sol HA 40 2.3.2.2 Quy trình chế tạo sol FHA 41 iii 2.3.3 Chế tạo lớp phủ HAvà FHA lên vật liệu titan 42 2.4 Phương pháp nghiên cứu đánh giá tính chất lớp phủ 42 2.4.1 Phương pháp đánh giá tính chất vật lý học 43 2.4.1.1 Phương pháp phân tích nhiệt vi sai nhiệt trọng lượng 43 2.4.1.2 Phương pháp nhiễu xạ tia X 43 2.4.1.3 Phương pháp đo độ nhám bề mặt (Kính hiển vi 3D) 44 2.4.1.4 Phương pháp hiển vi điện tử quét phổ tán sắc lượng tia X 44 2.4.1.5 Phương pháp đo độ bền bám dính 45 2.4.2 Phương pháp điện hóa đánh giá tính chất ăn mòn .46 2.4.2.1.Hệ đo điện hóa ba điện cực cách chuẩn bị mẫu đo .46 2.4.2.2 Phương pháp đo tổng trở 47 2.4.2.3 Phương pháp đo đường cong phân cực anốt (Potentiodynamic) .48 2.4.3 Các phương pháp đánh giá khả tương thích sinh học 49 2.4.3.1 Đánh giá thử nghiệm in-vitro 49 2.4.3.2 Đánh giá thử nghiệm in- vivo động vật 50 CHƯƠNG III KẾT QUẢ VÀ THẢO LUẬN 53 3.1 Nghiên cứu chế tạo lớp phủ HA phương pháp Sol-Gel 53 3.1.1 Nghiên cứu đặc tính sol 53 3.1.1.1 Nghiên cứu ảnh hưởng giá trị pH sol đến hình thành pha 53 3.1.1.2 Nghiên cứu ảnh hưởng pH đến độ nhớt sol .55 3.1.1.3 Nghiên cứu ảnh hưởng pH đến cấu trúc bề mặt lớp phủ 57 3.1.1.4 Ảnh hưởng nhiệt độ nung đến phân hủy sol HA 58 3.1.2 Nghiên cứu ảnh hưởng thơng số cơng nghệ chế tạo đến tính chất lớp phủ HA vật liệu titan 59 3.1.2.1 Xác định chiều dày lớp phủ HA 59 3.1.2.2 Nghiên cứu ảnh hưởng chế độ nung đến tính chất lớp phủ HA 61 a Ảnh hưởng chế độ nung đến cấu trúc lớp phủ 62 b Ảnh hưởng chế độ nung đến thành phần pha lớp phủ 67 c Ảnh hưởng chế độ nung đến độ bền bám dính lớp phủ 69 d Ảnh hưởng chế độ nung đến khả chống ăn mòn 71 3.1.3 Nghiên cứu nâng cao độ bền bám dính lớp phủ HA .75 iv 3.1.3.1 Nghiên cứu nâng cao độ bền bám dính lớp phủ HA cách tạo lớp TiO2 trung gian 75 3.1.3.2 Nghiên cứu nâng cao độ bền bám dính titan xốp 86 3.1.3.3 Nghiên cứu nâng cao độ bền bám dính lớp FHA 87 3.2 Đánh giá khả tương thích sinh học vật liệu 92 3.2.1 Nghiên cứu in-vitro 92 3.2.1.1 Nghiên cứu hình thành màng apatit thử nghiệm in-vitro 92 3.2.1.2 Sự thay đổi thành phần dung dịch SBF sau thử nghiệm in-vitro 101 3.2.1.3.Sự hao hụt khối lượng sau thử nghiệm in-vitro .102 3.2.2 Nghiên cứu in vivo 103 3.2.2.1 Đánh giá tình trạng chỗ vết mổ 103 3.2.2.2 Các số huyết học trước sau phẫu thuật .104 3.2.2.3 Đánh giá hình ảnh đại thể vị trí ghép thỏ sau cấy ghép vật liệu kết xương 105 ĐỀ XUẤT VÀ KIẾN NGHỊ 109 NHỮNG ĐÓNG GÓP MỚI CỦA LUẬN ÁN 110 TÀI LIỆU THAM KHẢO 112 v DANH MỤC CÁC KÝ HIỆU VÀ CHỮ VIẾT TẮT Viết tắt ký hiệu 2 ba bc BM Ca P CE DCPA DTA E FHA HA EDS i io n PM RE SBF SCE SHE TCP vi TGA v WE XRD ρ ηa ηc vii 111 TÀI LIỆU THAM KHẢO Prasad, K., et al., Metallic Biomaterials: Current Challenges and Opportunities Materials (Basel), 2017 10(8): p 1-33 Zheng, Y.F., X.N Gu, and F Witte, Biodegradable metals Materials Science and Engineering: R: Reports, 2014 77: p 1-34 Fuentes, V.S.d.V.a.E., Titanium and Titanium Alloys as Biomaterials Tribology - Fundamentals and Advancements, 2013: p 155181 Liu, X., P Chu, and C Ding, Surface modification of titanium, titanium alloys, and related materials for biomedical applications Materials Science and Engineering: R: Reports, 2004 47(3-4): p 49-121 Marc Long, H.J.R., Titanium alloys in total joint replacement—a materials science perspective Biomaterials, 1998 19: p 1621-1639 S A Adeleke, I.S.a.A.R.B., Hydroxyapatite layer formation on titanium alloys surface using micro-arc oxidation ARPN Journal of Engineering and Applied Sciences, 2015 10(21): p 10101-10107 Tredwin, C.J., Sol-Gel Derived Hydroxyapatite, Fluorhydroxyapatite and Fluorapatite Coatings for Titanium Implants A thesis submitted for the degree of Doctor of Philosophy, 2009: p 1-289 Ignatev, M., et al., Plasma Sprayed Hydroxyapatite Coatings Modified with Silver Nanoparticles Acta Metallurgica Slovaca, 2013 19(1): p 20-29 Manjaiah, M and R.F Laubscher, A review of the surface modifications of titanium alloys for biomedical applications Materiali in tehnologije, 2017 51(2): p 181-193 10 Weng, W., et al., Sol–gel preparation of bioactive apatite films Surface and Coatings Technology, 2003 167(2-3): p 292-296 11 Hae Won Kima, H.-E.K., Jonathan C Knowles, Fluorhydroxyapatite sol-gel coating on titanium substrate for hard tissue implants Biomaterials, 2004 25(17): p 3351-3358 12 Kim, H.-W., H.-E Kim, and J.C Knowles, Improvement of Hydroxyapatite Sol-Gel Coating on Titanium with Ammonium Hydroxide Addition Journal of the American Ceramic Society, 2004 88(1): p 154-159 13 Thanh, Đ.T.M., Nghiên cứu chế tạo lớp phủ tổ hợp y sinh titannitrit hydroxyapatit cấu trúc nano thép khơng gỉ, ứng dụng làm nẹp vít xương y tế, Báo cáo tổng kết đề tài nghiên cứu khoa học công nghệ, 2013 14 Kulkarni, R.M.D.a.S.S., A Review on Biomaterials in Orthopedic Bone Plate Application International Journal of Current Engineering and Technology, 2015 5(4): p 2587-2591 15 Mitsuo Niinomi, M.N., Junko Hieda and Ken Cho, A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications Int J Surface Science and Engineering,, 2014 8(2): p 138-152 16 M Hamadouche, L.S., CERAMICS IN ORTHOPAEDICS British Editorial Society of Bone and Joint Surgery, 2000 82(8): p 1095-2000 17 Agarwal, S., et al., Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications Mater Sci Eng C Mater Biol Appl, 2016 68: p 948963 112 18 Nitesh R Patel, P.P.G., A Review on Biomaterials: Scope, Applications & Human Anatomy Significance International Journal of Emerging Technology and Advanced Engineering, 2012 2(4): p 91-101 19 S.Anil, P.S.A., H Alghamdi and J.A Jansen, Dental Implant Surface Enhancement and Osseointegration Implant Dentistry 2011 4: p 83-108 20 Upendra Sharan Gupta, A.P., Vijay Gehlot, Jitendra jayant, Dr M L Jain, A Review of Biocompatible Materials for Medical Implants Using Additive Manufacturing Int J of Adv Res Sci, 2018 7(5): p 243-253 21 Nikitas Sykaras, A.M.I., Victoria A Marker, R Gilbert Triplett, DDS /Ronald D Woody, Implant Materials, Designs, and Surface Topographies: Their Effect on Osseointegration A Literature Review The International Journal of Oral & Maxillofacial Implants, 2000 15(5): p 675690 22 Agnes Aruna John, S.K.J., Eko Supriyanto and A Manikandan, Surface modification of titanium and its alloys for the enhancement of osseointegration in orthopaedics Current Science, 2016 111(6): p 1003-1015 23 Moravej, M and D Mantovani, Biodegradable metals for cardiovascular stent application: interests and new opportunities Int J Mol Sci, 2011 12(7): p 4250-70 24 Prakasam, M., et al., Biodegradable Materials and Metallic Implants-A Review J Funct Biomater, 2017 8(4): p 1-15 25 George M KONTAKIS, J.E.P., Theodoros I TOSOUNIDIS, John MELISSAS, Pavlos KATONIS, Bioabsorbable materials in orthopaedics Acta Orthop Belg, 2007 73(2): p 159-169 26 Hiromoto, S., et al., In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite Acta Biomater, 2015 11: p 52030 27 Yang, J.X., et al., Modification of degradation behavior of magnesium alloy by IBAD coating of calcium phosphate Surface and Coatings Technology, 2008 202(22-23): p 5733-5736 28 Santos, G.A.d., The Importance of Metallic Materials as Biomaterials Advances in Tissue Engineering & Regenerative Medicine: Open Access, 2017 3(1): p 300-302 29 A Moroni, V.L.C., E.L Egger, L Trinchese and E.Y.S Chao, Histomorphometry of hydroxyapatite coated and uncoated porous titanium bone implants Biomaterials 1994 15(11): p 925-930 30 Afrooz Latifia, A.A., Aliasghar Behnamghaderc, Sedigheh Joughehdousta, Sol-Gel Derived Titania Coating on Titanium Substrate Iranian Journal of Pharmaceutical Sciences, 2008 4(1): p 17-22 31 Osman, R.B and M.V Swain, A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia Materials (Basel), 2015 8(3): p 932-958 32 C.N Elias, J.H.C.L., R Valiev, and M.A Meyers, Biomedical Applications of Titanium and its Alloys Biological Materials Science, 2008: p 46-49 33 Lee, Y.-H., et al., Modified titanium surface with gelatin nano gold composite increases osteoblast cell biocompatibility Applied Surface Science, 2010 256(20): p 5882-5887 113 34 Jody Redepenning, G.V., Jun Chen, Nathan Stafford, Electrochemical preparation of chitosan/hydroxyapatite composite coatings on titanium substrates Wiley Periodicals, 2003: p 411-416 35 Korotin, D.M., et al., Surface Characterization of Titanium Implants Treated in Hydrofluoric Acid Journal of Biomaterials and Nanobiotechnology, 2012 03(01): p 87-91 36 Kim, H., et al., The biocompatibility of SLA-treated titanium implants Biomed Mater, 2008 3(2): p 1-6 37 Bsat, S., et al., Effect of Alkali-Acid-Heat Chemical Surface Treatment on Electron Beam Melted Porous Titanium and Its Apatite Forming Ability Materials (Basel), 2015 8(4): p 1612-1625 38 K Fatehi, F.M., M.Solati Hashtjini, Effect of Alkali and Heat Treatment on Biomimetic HA Coating on Ti6Al4V MISC, 2009 41(2): p 5965 39 Cao, L., et al., Plasma spray of biofunctional (Mg, Sr)-substituted hydroxyapatite coatings for titanium alloy implants Journal of Materials Science & Technology, 2019 35(5): p 719-726 40 Liang, Y., et al., Zinc ion implantationdeposition technique improves the osteoblast biocompatibility of titanium surfaces Mol Med Rep, 2015 11(6): p 4225-31 41 K Hayashi, T.M., K Uenoyama, The effect of hydroxyapatite coating on bony ingrowth into grooved titanium implants Biomaterials, 1999 20: p 111-119 42 Lukaszewska-Kuska, M., et al., Hydroxyapatite coating on titanium endosseous implants for improved osseointegration: Physical and chemical considerations Adv Clin Exp Med, 2018 27(8): p 1055-1059 43 Roxana Family, M.S.-H., Shahram Namjoy Nik, Ali Nemati Surface modification for titanium implants by hydroxyapatite nanocomposite Caspian J Intern Med, 2012 3(3): p 460-465 44 Wally, Z., et al., Porous Titanium for Dental Implant Applications Metals, 2015 5(4): p 1902-1920 45 Zhang, E and C Zou, Porous titanium and silicon-substituted hydroxyapatite biomodification prepared by a biomimetic process: Characterization and in vivo evaluation Acta Biomaterialia, 2009 5(5): p 1732-1741 46 Lopez-Heredia, M.A., et al., Bone growth in rapid prototyped porous titanium implants J Biomed Mater Res A, 2008 85(3): p 664-673 47 Alireza Nouri, P.D.H.a.C.e.W., Biomimetic Porous Titanium Scaffolds for Orthopedic and Dental Applications Biomimetics Learning from Nature, 2010 21: p 415-450 48 Eliaz, N and N Metoki, Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications Materials (Basel), 2017 10(4): p 1-104 49 Larsen, S., Solubility of Hydroxyapatite Nature, 1966 212(5062): p 605-605 50 Carrado, A., et al., Nanoporous hydroxyapatite/sodium titanate bilayer on titanium implants for improved osteointegration Dent Mater, 2017 33(3): p 321-332 51 Dunya Abdulsahib Hamdi, Z.T.J., Kwangsoo NO, Jaegyu Kim, L.Thair, Thamir Abdul- Jabaar Jumaae, Investigation The Hydroxyapatite Coatings On Titanium Alloys Using Magnetron - Sputtered Process And Differentiate 114 Between Single And Triple Layers Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2015 2(9): p 2599-2608 52 Voigt, J.D and M Mosier, Hydroxyapatite (HA) coating appears to be of benefit for implant durability of tibial components in primary total knee arthroplasty Acta Orthop, 2011 82(4): p 448-59 53 Wenping Jiang, J.C., Dinesh K Agrawal, Ajay P Malshe1, Huinan Liu, Improved Mechanical Properties of Nanocrystalline Hydroxyapatite Coating for Dental and Orthopedic Implants Mater Res Soc Symp Proc, 2009 114: p 1-5 54 Yang, B., Preparation of bioactive titanium metal via anodic oxidation treatment Biomaterials, 2004 25(6): p 1003-1010 55 Yang, J., et al., Surface modification of titanium with hydroxyapatite layer induced by phase-transited lysozyme coating Mater Sci Eng C Mater Biol Appl, 2018 92: p 206-215 56 Zhang, B.G.X., Myers, D E., Wallace, G G., Brandt, M & Choong,, Bioactive coatings for orthopaedic implants-recent trends in development of implant coatings International Journal of Molecular Science, 2014 15(7): p 11878-11921 57 Kim, H.W., et al., Hydroxyapatite and titania sol-gel composite coatings on titanium for hard tissue implants; mechanical and in vitro biological performance J Biomed Mater Res B Appl Biomater, 2005 72(1): p 1-8 58 Hae-Won, K., et al., Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method Biomaterials, 2004 25(13): p 2533-2538 59 Mohseni, E., E Zalnezhad, and A.R Bushroa, Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper International Journal of Adhesion and Adhesives, 2014 48: p 238-257 60 Tredwin, C.J., et al., Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol-gel method: dissolution behaviour and biological properties after crystallisation J Mater Sci Mater Med, 2014 25(1): p 47-53 61 Tredwin, C.J., et al., Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol-gel method Optimisation, characterisation and rheology Dent Mater, 2013 29(2): p 166-173 62 Batebi, K., B Abbasi Khazaei, and A Afshar, Characterization of sol-gel derived silver/fluor-hydroxyapatite composite coatings on titanium substrate Surface and Coatings Technology, 2018 352: p 522-528 63 Elkoca, O., et al., Hydroxyapatite Coating on Cp-Ti Implants by Biomimetic Method Advanced Materials Research, 2012 445: p 679-684 64 Gurpreet Singh, H.S.a.B.S.S., The Effect of CaP Concentration on Corrosion Behavior of Plasma Sprayed Hydroxyapatite Coating on Titanium in Simulated Body Fluid Singh et al., J Biomim Biomater Tissue Eng, 2013 18(1): p 1-6 65 Desai, A.Y., Fabrication and Characterization of Titanium-doped Hydroxyapatite Thin Films Degree of Master of Philosophy in Physics at the University of Cambridge, 2007: p 1-66 66 Mediaswanti, K., et al., Sputtered Hydroxyapatite Nanocoatings on Novel Titanium Alloys for Biomedical Applications Advances in Properties Control, 2013: p 21-44 115 67 Jankowski, T.G.N.a.A.F., Processing and characterization of hydroxyapatite coatings on titanium produced by magnetron sputtering J Mater Res, 2001 16(11): p 3228-3245 68 Adrian Nur, H.S., Arief Widjaja, I Wuled Lenggoro, Electrochemical Processes for the Formation of Hydroxyapatite Powders Bulletin of Chemical Reaction Engineering & Catalysis,, 2014 9(3): p 168175 69 Kumoro, A.C., et al., The Current Density on Electrosynthesis of Hydroxyapatite with Bipolar Membrane MATEC Web of Conferences, 2018 156: p 05015 70 Faghihi-Sani, M.-A., A Arbabi, and A Mehdinezhad-Roshan, Crystallization of hydroxyapatite during hydrothermal treatment on amorphous calcium phosphate layer coated by PEO technique Ceramics International, 2013 39(2): p 1793-1798 71 Zhen-jun, W., L.-p He, and Z.-z Chen, Fabrication and characterization of hydroxyapatite/Al2O3 biocomposite coating on titanium Transactions of Nonferrous Metals Society of China, 2006 16(2): p 259266 72 Peng, Z., et al., Effect of Ti-OH groups on microstructure and bioactivity of TiO2 coating prepared by micro-arc oxidation Applied Surface Science, 2013 268: p 381-386 73 Ahmadi, S., I Mohammadi, and S.K Sadrnezhaad, Hydroxyapatite based and anodic Titania nanotube biocomposite coatings: Fabrication, characterization and electrochemical behavior Surface and Coatings Technology, 2016 287: p 67-75 74 Drevet, R., et al., Electrophoretic deposition (EPD) of nanohydroxyapatite coatings with improved mechanical properties on prosthetic Ti6Al4V substrates Surface and Coatings Technology, 2016 301: p 94-99 75 S BHARATI, M.K.S.a.D.B., Hydroxyapatite coating by biomimetic method on titanium alloy using concentrated SBF Bull Mater Sci., 2005 28(6): p 617-621 76 Li, N.-b., et al., The significant influence of ionic concentrations and immersion temperatures on deposition behaviors of hydroxyapatite on alkaliand heat-treated titanium in simulated body fluid Thin Solid Films, 2018 646: p 163-172 77 Klein, L.C., A review of: “Sol-Gel Science - The Physics and Chemistry of Sol-Gel Processing” Edited by C Jeffrey Brinker and George W Scherer Materials and Manufacturing Processes, 1994 9(5): p 1007-1008 78 WEST, A.L.H.a.J.K., The Sol-Gel Process Chem Rev, 1990: p 3372 79 Tốp, L.K., Tạo màng phương pháp Sol-Gel 2015, Đại học Quốc gia Thành Phố Hồ Chí Minh p 1-12 80 Vijayalakshmi, U., K Prabakaran, and S Rajeswari, Preparation and characterization of sol-gel hydroxyapatite and its electrochemical evaluation for biomedical applications J Biomed Mater Res A, 2008 87(3): p 739-49 81 Mehdi Mazar Atabaki, R.a.J., Jamaliah Idris, Sol-Gel bioactive glass coating for improvement of biocompatible human body implant Association of Metallurgical Engineers of Serbia AMES, 2010 16(3): p 149-163 82 C J Brinker, G.C.F., A J Hurd and C S Ashley, Fundamentals of Sol-Gel dip coating Thin Solid Films, 1991 201: p 97-101 116 83 Choudhury, P and D.C Agrawal, Sol–gel derived hydroxyapatite coatings on titanium substrates Surface and Coatings Technology, 2011 206(2-3): p 360-365 84 Domínguez-Trujillo, C., et al., Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications Surface and Coatings Technology, 2018 333: p 158-162 85 Choi1, B.B.-N.A.H., Sol-gel production of bioactive nanocoatings for medical applications Nanomedicine 2006 1(3): p 311-319 86 Ji, X., et al., Sol-gel-derived hydroxyapatite-carbon nanotube/titania coatings on titanium substrates Int J Mol Sci, 2012 13(4): p 5242-53 87 Zhang, S., et al., Adhesion strength of sol–gel derived fluoridated hydroxyapatite coatings Surface and Coatings Technology, 2006 200(2223): p 6350-6354 88 Yang, Y.C and B.Y Chou, Bonding strength investigation of plasma-sprayed HA coatings on alumina substrate with porcelain intermediate layer Materials Chemistry and Physics, 2007 104(2-3): p 312319 89 Hạnh, V.T., Tổng hợp đặc trưng màng hydroxyapatitpha tạp số nguyên tố vi lượng thép không gỉ 316L định hướng ứng dụng làm nẹp vít xương in Luận án Tiến Sĩ 2018, Học viện Khoa học Công nghệ 90 Hijon, N., et al., Dip coated silicon-substituted hydroxyapatite films Acta Biomater, 2006 2(5): p 567-574 91 Cheng, K., et al., Bonding strength of fluoridated hydroxyapatite coatings: A comparative study on pull-out and scratch analysis Thin Solid Films, 2009 517(17): p 5361-5364 92 99, A.F., Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings, in Designation: F 1044 – 99 1999, ASTM International, West Conshohocken, PA 93 A Costescu, I.P., F Ungreanu, A Dinischiotu, M and F.H Costache, S Galaup, P Lecoutumer, D Predoi, Physico-chemical properties of nano-sized hexagonal Hydroxyapative powder synthesized by Sol-Gel Digest Journal of Nanomaterials and Biostructures, 2010 5(4): p 989-1000 94 El Hadad, A.A., et al., Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy Materials (Basel), 2017 10(2): p 2-25 95 Bilton, M., S.J Milne, and A.P Brown, Comparison of Hydrothermal and Sol-Gel Synthesis of Nano-Particulate Hydroxyapatite by Characterisation at the Bulk and Particle Level Open Journal of Inorganic Non-metallic Materials, 2012 02(01): p 1-10 96 Suchanek, K., et al., The influence of nanoporous anodic titanium oxide substrates on the growth of the crystalline hydroxyapatite coatings Materials Chemistry and Physics, 2017 186: p 167-178 97 Tas, B.M.a.A.C.n., Dip Coating of Calcium Hydroxyapatite on Ti6Al-4V Substrates J Am Ceram Soc., 2000 83(4): p 989-991 98 Wen, C.E., et al., Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications Acta Biomater, 2007 3(3): p 403-10 117 99 Sajjad Jafari, M.M.A., Jamaliah Idris, Comparative study bioactive coating of Ti-6Al-4V alloy and 316 L Stainless steel Metall Mater Eng, 2011 18(2): p 145-158 100 Dou, J., et al., Effects of sintering temperature on the properties of alumina/hydroxyapatite composites Journal of Sol-Gel Science and Technology, 2017 84(1): p 23-27 101 Enos, D.G., The Potentiodynamic Polarization Scan Solartron Instruments a division of Solartron G, 1997(2): p 1-13 102 S Agiladevi, S.R., J.Jeyasundari, M.Pandiarajan, CORROSION RESISTANCE OF METALS IN SIMULATED RINGER SOLUTION-A Eur Chem Bull., 2013 2(2): p 84-87 103 Vijayalakshmi, S.A.X.S.a.U., In vitro electrodeposition of Hydroxyapatite coatings on Ti-6Al-4V for biomedical applications International Journal of ChemTech Research, 2015 7(2): p 958-962 104 Markhoff, J., et al., Influence of Different Three-Dimensional Open Porous Titanium Scaffold Designs on Human Osteoblasts Behavior in Static and Dynamic Cell Investigations Materials (Basel), 2015 8(8): p 54905507 105 Tamilselvi, S., V Raman, and N Rajendran, Corrosion behaviour of Ti–6Al– 7Nb and Ti–6Al–4V ELI alloys in the simulated body fluid solution by electrochemical impedance spectroscopy Electrochimica Acta, 2006 52(3): p 839-846 106 Lu, T., et al., Enhanced osteointegration on tantalum-implanted polyetheretherketone surface with bone-like elastic modulus Biomaterials, 2015 51: p 173-183 107 Jafari, S., M.M Taheri, and J Idris, Thick Hydroxyapatite Coating on Ti-6Al-4V through Sol-Gel Method Advanced Materials Research, 2011 341-342: p 48-52 108 Hossein Eslami, M.S.-H., Mohammadreza Tahriri, Synthesis and Characterization of Hydroxyapatite Nanocrystals via Chemical Precipitation Technique Iranian Journal of Pharmaceutical Sciences, 2008 4(2): p 127134 109 Jafari, H., et al., Characterizing Sintered Nano-Hydroxyapatite SolGel Coating Deposited on a Biomedical Ti-Zr-Nb Alloy Journal of Materials Engineering and Performance, 2016 25(3): p 901-909 110 Miyazaki, H., et al., Thermal expansion of hydroxyapatite between −100 °C and 50 °C Materials Science and Engineering: C, 2009 29(4): p 1463-1466 111 Ichikawa, Y., et al., Evaluation of Adhesive Strength of ThermalSprayed Hydroxyapatite Coatings Using the LAser Shock Adhesion Test (LASAT) Materials Transactions, 2007 48(4): p 793-798 112 Devices, H.o.M.f.M., Overview of Biomaterials and Their Use in Medical Devices Handbook of Materials for Medical Devices, 2003: p 1-11 113 Zhang, S., et al., Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings Thin Solid Films, 2008 516(16): p 51625167 114 Wang, Y., et al., Osteoblastic cell response on fluoridated hydroxyapatite coatings Acta Biomater, 2007 3(2): p 191-7 115 Shi, H., Formation mechanism of anodic TiO2 nanotubes Advances in Engineering Research, 2017 123(785-788): p 785-788 118 116 Eliaz, N., et al., The effect of surface treatments on the adhesion of electrochemically deposited hydroxyapatite coating to titanium and on its interaction with cells and bacteria J Mater Sci Mater Med, 2011 22(7): p 1741-52 117 Wijesinghe, W.P., et al., Preparation of bone-implants by coating hydroxyapatite nanoparticles on self-formed titanium dioxide thin-layers on titanium metal surfaces Mater Sci Eng C Mater Biol Appl, 2016 63: p 17284 118 Grossin, I.D.D and C.C.C Rey, Plasma-Sprayed Apatite Coatings: Review of Physical-Chemical characteristics and Their Biological Consequences Journal of Medical and Biological Engineering, 2014 34(1): p 1-7 119 ISO 13779-Implants for surgery — Hydroxyapatite — 2008 119 ... tài nghiên cứu luận án: Nghiên cứu chế tạo lớp phủ hydroxyapatit có khả tương thích sinh học vật liệu titan phương pháp sol- gel Mục tiêu luận án: Chế tạo lớp phủ sở HA lên vật liệu titan phương. .. 1.1.2.3 .Vật liệu titan 15 1.2 Các lớp phủ tương thích sinh học 22 1.2.1 Các loại hợp chất tương thích sinh học canxi photphat (Ca-P) .22 1.2.2 Các lớp phủ tương thích sinh học. .. sinh học học Các phương pháp xử lí bề mặt tiên tiến áp dụng cho vật liệu kim loại sinh - Giới thiệu lớp phủ tương thích sinh học - Giới thiệu lớp phủ sở Hydroxyapatit (HA) - Các phương pháp chế

Ngày đăng: 29/10/2019, 06:15

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan