Bill of quantity form

31 192 0
Bill of quantity form

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

BILL OF QUANTITIES FORM PROJECT TITLE : LOCATION : ITEM NO ITEM DESCRIPTION QUANTITY UNIT LIGHTING OUTLETS Supply ,install, connect and unit 369 test lighting outlets including conduits, conduit fittings, boxes, wiring, cabling, earthing, accessories and all necessary works and materials required for complete installation back to panel boards as specified and as indicated on the drawings for : Lighting outlets controlled by one/two way switch using copper wire (3x2.5 sqmm) in 20 mm pvc conduit LIGHTING FIXTURES Supply, installing, connecting, unit 144 and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for : Recessed ceiling or suspended ceiling luminaries with hand-blown opal glass, satin matt and metal fitter Cable entries for throughwiring Compact fluorescent lamps TC-TELI · 26 W mod 8779 GLASHUTTE LIMBURG Subtotal UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION UNIT LIGHTING FIXTURES Supply, installing, connecting, Unit 46 and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: Recessed ceiling or suspended ceiling luminaries with handblown opal glass, satin matt and metal fitter Cable entries for throughwiring Compact fluorescent lamps TC-TELI · 26 W mod 7981 GLASHUTTE LIMBURG Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: Ceiling luminaries for direct and indirect light made of white satin matt glass and metal fitter Compact fluorescent lamps T16R · 55 + 60 W mod 8460 GLASHUTTE LIMBURG Subtotal QUANTITY 20 Unit UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION QUANTITY UNIT LIGHTING FIXTURES Subtotal Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: Ceiling luminaries for direct and indirect light made of white satin matt glass and metal fitter Compact fluorescent lamps T16R · 55 + 22 W mod 8459 GLASHUTTE LIMBURG Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: Ceiling luminaries for direct and indirect light made of white satin matt glass and metal fitter Compact fluorescent lamps T16R · 55 + 60 W mod 8868 brand GLASHUTTE LIMBURG 38 Unit 30 Unit UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION QUANTITY UNIT LIGHTING FIXTURES Subtotal Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: Pendant luminaries with crystal glass, partially satin matt, for free-radiating and uniform light Compact fluorescent lamps TC-TELI · 26 W Mod 5276 brand GLASHUTTE LIMBURG Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for: false ceiling recessed luminaries with light diffuser, protection IP44 minimum, fluo lamp 2x35W Cable entries for throughwiring - Groung floor kitchen brand iGuzzini mod action 6609-6806 Unit 26 Number UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION QUANTITY UNIT LIGHTING FIXTURES 10 Subtotal Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for pending mounted luminaries with light diffuser, protection IP44 minimum, fluo lamp 2x49W Cable entries for throughwiring - First Floor kitchen brand iGuzzini mod action 6609-6808 Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for Emergency wall light Supply, installing, connecting, and testing of lighting fixtures including lamps, all mounting brackets, starters, ballast, capacitor & accessories, fittings, wires, and all necessary works for proper operation in accordance with design drawings, and electrical specifications for Mini inverter for fluorescent lamps from 6W to 65W 34 Number 27 Number 34 Number UNIT PRICE TOTAL PRICE ITEM NO Subtotal ITEM DESCRIPTION QUANTITY UNIT SWITCHING DEVICES Supply, install, connect and 39 Number test of lighting switches Including all ancillary works and materials required for complete installation as specified and as indicated on the drawings ONE WAY ONE GANG LIGHTING SWITCH - 10 AMP Supply, install, connect and Number 23 test of lighting switches Including all ancillary works and materials required for complete installation as specified and as indicated on the drawings TWO WAY ONE GANG LIGHTING SWITCH - 10 AMP Supply, install, connect and Number test of lighting switches Including all ancillary works and materials required for complete installation as specified and as indicated on the drawings THROUGH OVER LIGHTING SWITCH - 10 AMP Supply, install, connect and 31 Number test of lighting switches Including all ancillary works and materials required for complete installation as specified and as indicated on the drawings BUTTON SWITCH FOR IMPULSE RELAY LIGHTING CONTROL - 10 AMP UNIT PRICE TOTAL PRICE ITEM NO Subtotal ITEM DESCRIPTION QUANTITY UNIT SOCKETS OUTLET Supply , install and test socket Number 143 outlet with copper cables inside P.V.C pipe for both exposed or embedded installation the price shall include wire or cables and all required accessories boxes ,fittings and material to complete the work form panel to outlet and according to specifications and drawings Outlet for single phase single socket 16 A with wires (3x4)mm2 inside 23 mm pipes Supply , install and test socket outlet with copper cables inside P.V.C pipe for both exposed or embedded installation the price shall include wire or cables and all required accessories boxes ,fittings and material to complete the work form panel to outlet and according to specifications and drawings Outlet for single phase power socket 32 A with wires (3x6)mm2 inside 23 mm pipes Supply , install and test socket outlet with copper cables inside P.V.C pipe for both exposed or embedded installation the price shall include wire or cables and all required accessories boxes ,fittings and material to complete the work form panel to outlet and according to specifications and drawings outlet for three phases switch 32A industrial socket with wires (4x6)+6mm2 59 Number 54 Number UNIT PRICE TOTAL PRICE ITEM NO 3 ITEM DESCRIPTION Supply , install and test socket of different rating complete with all required accessories according to specifications and as follows three phases switch 32A industrial socket IP 55 Supply , install and test socket of different rating complete with all required accessories according to specifications and as follows single phase single socket 16A industrial socket IP55 Supply , install and test socket of different rating complete with all required accessories according to specifications and as follows single phase single socket 16 A UNIT Sockets 54 Number 54 Number 89 Number DISTRIBUTION BOARD DB-3 NEW Number DB-A Number DB-B Number Number DB-C Number DB3-D DB3-BAR-GF Number Number DB3-E Number DB3-BAR-FF PB : protection panel board Number 54 for kitchen industrial sockets Subtotal QUANTITY UNIT PRICE TOTAL PRICE ITEM NO UNIT PRICE WIRES AND CABLES (low tension cables) Supply , install and test 20 ML ITEM DESCRIPTION multicore copper cables 0.6/1.2 KV , PVC/pvc to be installed in pipes, cable trays or ducts the price shall include termination , connection and identifications, connection to transformer , diesel generator and panels complete with all required accessories and fittings according to specifications (section 16120) and drawings CABLE(4x10)CU, PVC/PVC+10E Supply , install and test multicore copper cables 0.6/1.2 KV , PVC/pvc to be installed in pipes, cable trays or ducts the price shall include termination , connection and identifications, connection to transformer , diesel generator and panels complete with all required accessories and fittings according to specifications (section 16120) and drawings CABLE(4x25)CU, PVC/PVC+16E Supply , install and test multicore copper cables 0.6/1.2 KV , PVC/pvc to be installed in pipes, cable trays or ducts the price shall include termination , connection and identifications, connection to transformer , diesel generator and panels complete with all required accessories and fittings according to specifications (section 16120) and drawings CABLE (3x50+25) CU, PVC/PVC+25E Subtotal QUANTITY UNIT 30 ML 20 ML TOTAL PRICE ITEM NO Subtotal UNIT PRICE WIRES AND CABLES (low tension cables) Supply , install and test ML 40 ITEM DESCRIPTION QUANTITY UNIT multicore copper cables 0.6/1.2 KV , PVC/pvc to be installed in pipes, cable trays or ducts the price shall include termination , connection and identifications, connection to transformer , diesel generator and panels complete with all required accessories and fittings according to specifications (section 16120) and drawings CABLE (3x70+35) CU, PVC/PVC+35E Supply , install and test multicore copper cables 0.6/1.2 KV , PVC/pvc to be installed in pipes, cable trays or ducts the price shall include termination , connection and identifications, connection to transformer , diesel generator and panels complete with all required accessories and fittings according to specifications (section 16120) and drawings CABLE (3x120+70) CU, PVC/PVC+70E 10 ML TELEPHONE SYSTEM AND DATA SYSTEM Number 18 Supply, install & test telephone outlet including conduits, cables 2(2x0.6) mm2 copper, boxes &all other accessories to put the system in a good operation to serve all building, according to specification drawings Supply, install & test telephone socket RJ11, complete according to specification drawings Supply, install & test data (computer) point including cables (UTP CAT (6)), conduits, pull boxes and all accessories from the data outlet to the patch panel, as specified 18 Number Number TOTAL PRICE BILL OF QUANTITIES FORM PROJECT TITLE : LOCATION : Subtotal QUANTITY UNIT Lump sum Lump sum Demolishing the required staircases using the suitable tools to execute the works (don't use heavy hammers) Concrete only to be demolished, leaving the steel bars fixed as it is; also don't demolish any of the staircase surrounding beams Item includes repairing the damage resulting from the demolishing works Item also includes getting rid of all unneeded resulted demolished materials in the public waste sites otherwise the contractor will be charged for any governmental penalties Reconstruction of reinforced concrete stairs, needed foundations, shear walls according to the new design Item includes all requirements and preparation for executing the works , also includes preparations and modifications needed in the surrounded beams according to the construction drawings, making holes for implanting steel bars using the suitable chemical materials is included in price Supply and installation of granite tiles for the previous mentioned stair light colors like beige are suggested, if not available black color is suggested with width 1.2 m., thicknesses of tiles (4 cm for runs, cm for risers) skirt with thickness of 2cm and 12 cm height, treads should be done on the external end of the runs and nose chamfering Granite Sample should be approved by the consultants Item includes all requirements for executing and completing the work supply ITEM DESCRIPTION 50.4 m.l 50.4 m.l installation ITEM NO UNIT PRICE TOTAL PRICE Subtotal Alternative item: Supply and constructing brick masonry handrail for the stair cases mentioned in item no (2) According to the construction drawings with height of 1m and with 0.12 m thickness Item includes all requirements for executing and completing the work Supply and construction of new reinforced concrete stairs, needed foundations, shear walls at the classrooms corridor ends according to the new design Item includes all requirements, materials and preparation for executing and completing the works Supply and installation of granite tiles for the previous mentioned stair light colors like beige are suggested, if not available black color is suggested with width 2.00 m., thicknesses of tiles (4 cm for runs, cm for risers) skirt with thickness of 2cm and 12 cm height, treads should be done on the external end of the runs and nose chamfering Granite Sample should be approved by the consultants Item includes all requirements for executing and completing the work UNIT supply installation Alternative item: Supply and installation of FILETTO HASANA for the previous mentioned stair with width 1.2 m thicknesses of tiles (4 cm for runs, cm for risers) skirt with thickness 2cm and 12 cm height ,treads should be done on the external end of the runs and nose chamfering Marble Sample should be approved by the consultants Item includes all requirements for executing and completing the work Supply and constructing reinforced concrete handrail for the stair cases mentioned in item no (2) According to the construction drawings with height of 1m and with 0.10 m thickness Item includes all requirements for executing and completing the work QUANTITY 50.4 m.l 50.4 m.l 14.3 m.l 14.3 m.l Lump sum supply ITEM DESCRIPTION installation ITEM NO 82 m.l 82 m.l UNIT PRICE TOTAL PRICE 10 11 12 13 Subtotal Alternative item: Supply and installation of FILETTO HASNA for the previous mentioned stair with width 2.00 m thicknesses of tiles (4 cm for runs, cm for risers) skirt with thickness 2cm and 12 cm height ,treads should be done on the external end of the runs and nose chamfering Marble Sample should be approved by the consultants Item includes all requirements for executing and completing the work Supply and constructing reinforced concrete handrail for the stair cases mentioned in item no (7) According to the construction drawings with height of 1m and with 0.20 m thickness Item includes all requirements for executing and completing the work Alternative item: Supply and constructing brick masonry handrail for the stair cases mentioned in item no (7) According to the construction drawings with height of 1m and with 0.20 m thickness Item includes all requirements for executing and completing the work Demolishing of the required brick walls with thickness 12 -20 cm Item includes repairing the damage resulting from the demolishing works Item also includes getting rid of all unneeded demolished materials in the public waste sites, otherwise the contractor will be charged for any governmental penalties Demolishing in the reinforced concrete slab to make the required holes for the needed ducts according to the architectural drawings Item includes repairing the damage resulting from the demolishing works Item also includes getting rid of all unneeded demolished materials in the public waste sites Contractor will be charged for any governmental penalties QUANTITY UNIT supply ITEM DESCRIPTION installation ITEM NO 82 m.l 82 m.l 20.8 m.l 20.8 m.l 526.2 m2 12 Lump sum UNIT PRICE TOTAL PRICE ITEM NO 14 15 16 17 18 Subtotal ITEM DESCRIPTION Demolishing of the required brick walls with thickness 21 -60 cm Item includes repairing the damage resulting from the demolishing works Item also includes getting rid of all unneeded demolished materials in the public waste sites Contractor will be charged for any governmental penalties Supply and installation of light cement brick walls or other corresponding type according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes Price only: Supply and installation of light cement brick walls or other corresponding type according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes Scraping the required existing plastering for walls or ceilings, and the mortar beneath it until reaching the brick clear surface or the concrete slab Item includes repairing the damage resulting from the scraping works Item also includes getting rid of all unneeded scarped materials in the public waste sites Contractor will be charged for any governmental penalties * Undefined quantity will be defined on site, according to requirements Scraping the required existing ceramic tiles for walls and the mortar beneath it until reaching the brick clear surface Item includes repairing the damage resulting from the scraping works Item also includes getting rid of all unneeded scarped materials in the public waste sites Contractor will be charged for any governmental penalties QUANTITY UNIT 5.6 m3 1078.6 m2 m3 2500 m2 343.4 m2 UNIT PRICE TOTAL PRICE 21 22 23 24 25 Subtotal Supply and painting of coats of latex paint for ceilings including all the preparatory steps before painting final coats Sample and color should be approved Item includes all requirements for executing the work and complete finishes Supply and painting of coats of plastic paint for walls including all the preparatory steps before painting final coats Sample and color should be approved Item includes all requirements for executing the work and complete finishes Alternative item: Supply and painting of coats of oil paint for walls including all the preparatory steps before painting final coats Sample and color should be approved Item includes all requirements for executing the work and complete finishes Alternative item: Supply and painting of coats of lacquer paint (matt or shiny) for walls and ceilings including all the preparatory steps before painting final coats Sample and color should be approved Item includes all requirements for executing the work and complete finishes Supply and installation of vertical curved ceramic tiles as a junction unit between two sides of ceramic walls Sample should be approved Item includes all requirements for executing the work and complete finishes 620.5 m2 supply UNIT Installation 20 Supply and installation of cement plastering for the new walls and the scraped wall surfaces according to the required design Supply and installation of local ceramic tiles for walls according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes QUANTITY 1679.5 m2 1679.5 m2 3607.85 m2 3865 m2 3865 m2 3865 m2 supply 19 ITEM DESCRIPTION Installatio n ITEM NO 138.6 m.l 138.6 m.l UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION 26 Supply and installation of PVC rounded edges as a vertical junction unit between two sides of ceramic walls; color should be matched with ceramic tiles color Sample should be approved Item includes all requirements for executing the work and complete finishes 27 Supply and installation of stainless steel angle edges (5 X cm) with length of 2m and thickness of 1.5 mm as a vertical unit cover to protect ceramic edges Sample should be approved Item includes all requirements for executing the work and complete finishes Demolishing the required ceramic or marble floors including its skirts if exist Item includes repairing the damage resulting from the demolishing works Item also includes getting rid of all unneeded demolished materials and the filling sand beneath the demolished tiles in the public waste sites Contractor will be charged for any governmental penalties 28 29 30 Subtotal QUANTITY UNIT 170 m.l 106 m.l 1420.5 m2 1047.6 m2 558 m2 Smoothing and polishing the existing expired mosaic tiles of the classrooms and the corridor floors, Item includes dismantling of the expired tiles and replace them by new similar one (around 20% of the given total area) Item also includes grouting with the suitable white cement mortar Sample of new tiles should be approved Item includes all requirements for executing the work and complete finishes Supply and installation of bitumen water proofing layer (insoumat) for kitchens and bathrooms Item includes covering with two layers lied on two opposite direction to each other , considering skirts of minimum 25 cm.Item includes all requirements for executing the work and complete finishes *engineering measurement will be on the horizontal plan of the space UNIT PRICE TOTAL PRICE 34 35 Subtotal Supply and installation of granite skirts with 12 cm height and thickness cm for classrooms, teacher’s room and corridors Item includes chamfering the upper edge of the skirt Sample should be approved Item includes all requirements for executing the work and complete finishes Alternative item: Supply and installation of local marble skirts with 12 cm height and thickness cm for classrooms, teacher’s room and corridors Item includes chamfering the upper edge of the skirt Sample should be approved Item includes all requirements for executing the work and complete finishes supply Installation supply Installation supply Installation Supply and installation of local ceramic tiles for bathrooms floors according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes UNIT 862.5 m2 862.5 m2 348.3 m2 348.3 m2 286.15 m2 286.15 m2 747 m2 747 m2 747 m2 747 m2 supply 33 Supply and installation of local ceramic tiles for kitchens floors (Nonskid ceramic tiles 20x20 cm) according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes installation 32 Supply and installation of local ceramic tiles for restaurants & surrounding corridors floors according to the required design Sample should be approved Item includes all requirements for executing the work and complete finishes QUANTITY supply 31 ITEM DESCRIPTION installation ITEM NO UNIT PRICE TOTAL PRICE 39 40 Subtotal Alternative item: Supply and installation of marble skirts with 12 cm height and thickness cm for the restaurants Item includes chamfering the upper edge of the skirt Sample should be approved Item includes all requirements for executing the work and complete finishes Price only: Supply and installation of local marble tiles with thickness of cm for floors Item includes grouting with the suitable white cement mortar, smoothing and polishing the whole areas Sample should be approved Item includes all requirements for executing the work and complete finishes supply installation supply installation supply installation Alternative item: Supply and installation of granite skirts with 12 cm height and thickness cm for the restaurants Item includes chamfering the upper edge of the skirt Sample should be approved Item includes all requirements for executing the work and complete finishes supply 38 Supply and installation of regular ceramic skirts for the restaurants Sample should be approved Item includes all requirements for executing the work and complete finishes installation 37 Alternative item: Supply and installation of regular ceramic skirts for classrooms, teacher’s room and corridors Sample should be approved Item includes all requirements for executing the work and complete finishes QUANTITY supply 36 ITEM DESCRIPTION installation ITEM NO UNIT 747 m2 747 m2 116.26 m.l 116.26 m.l 116.26 m.l 116.26 m.l 116.26 m.l 116.26 m.l m2 m2 UNIT PRICE TOTAL PRICE 42 43 44 45 Subtotal Price only: Supply and installation of granite tiles with thickness of cm for floors Item includes grouting with the suitable white cement mortar, smoothing and polishing the whole areas Sample should be approved Item includes all requirements for executing the work and complete finishes Supply and installation of new flush oak veneers wooden door with new suitable wooden frame, price includes dismantling of the existing wooden doors and supplying and installing new knops, hinges and all needed accessories item also includes lustring and fixing stainless steel U- section shape on the bottom of the door leaf Item includes all requirements for executing the work and complete finishes Alternative item: Dismantling the existing wooden doors, removing the old paints, smoothing and repaint with the required paint Price includes wood repairing and changing all needed accessories re-installing again Sample of all accessories should be approved Item includes all requirements for executing the work and complete finishes Alternative item: Cladding both sides of the existing wooden doors with oak veneers Item includes modifying the existing door frames to fit the new door thickness Price includes supply and installation of new knops, hinges and all needed accessories, also includes polishing and all requirements for executing the work and complete finishes Sample of all accessories should be approved Supply and installation of suspended gypsum board fall ceiling in the restaurant of the ground floor according to the new design QUANTITY supply 41 ITEM DESCRIPTION UNIT m2 installation ITEM NO m2 28 no 28 no 28 no 103 m2 UNIT PRICE TOTAL PRICE ITEM NO 46 47 48 49 50 51 Subtotal ITEM DESCRIPTION Supply and installation of a wooden folding door leafs according to the architectural drawings with the dimensions of (17.5m X 2.85m) Supply and installation of Aluminum frame double glazed shutter door with fixed glazed frame on the top Anti panic exit device Dimension 155x280 cm Sample should be approved Item includes all requirements for executing the work and complete finishes (Da) Supply and installation of Galvanized iron frame single shutter door Antipanic exit device Firebreak door Dimension 90x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes (Db) Supply and installation of Aluminum frame single shutter door Anti-panic exit device Dimension 100x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes (Dc) Supply and installation of Galvanized iron frame double shutter door Antipanic exit device Firebreak door Dimension 140x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Dd) Supply and installation of Galvanized iron frame double shutter door feature window Antipanic exit device Firebreak door Dimension 140x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(De) QUANTITY UNIT Lump sum no 13 no no no no UNIT PRICE TOTAL PRICE ITEM NO 52 53 54 55 56 57 58 Subtotal ITEM DESCRIPTION Supply and installation of Timber double frame door Dimension 200x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Df) Supply and installation of Timber double leaf entrance door Dimension 195x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Dg) Supply and installation of Timber single leaf door Dimension 70x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Dh) Supply and installation of Timber single leaf door Dimension 90x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes (Di) Supply and installation of Timber single leaf door Anti panic exit device (disable toilettes) Dimension 90x210 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Dl) Alternative item: Supply and installation of Timber single leaf door with U shaped metal footing Dimension 90x220 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Dm) Supply and installation of Timber frame window with "vasistas" opening Dimension 80x70 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wa) QUANTITY UNIT no no 29 no 12 no no 28 no 15 no UNIT PRICE TOTAL PRICE ITEM NO 59 60 61 62 63 Subtotal ITEM DESCRIPTION Supply and installation of Timber frame single shutter casement window with rectangular fixed glazed frame on the top Dimension 60x151 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wb) Supply and installation of Timber frame single shutter casement window with semicircular fixed glazed frame on the top Dimension 60x151 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wc) Supply and installation of Aluminum frame double shutter casement window with rectangular fixed glazed frame on the top Dimension 155x155 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wd) Supply and installation of Aluminum frame four shutters casement window whereof the two laterals are fixed; and rectangular fixed glazed frame on the top Dimension 266x155 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(We) Supply and installation of Aluminum frame four shutters casement window whereof the two laterals are fixed; and semi-elliptical fixed glazed frame on the top Dimension 266x194 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wf) QUANTITY UNIT no 12 no 23 no 10 no no UNIT PRICE TOTAL PRICE ITEM NO 64 65 66 67 68 Subtotal ITEM DESCRIPTION Supply and installation of Timber frame double shutter casement window with rectangular fixed glazed frame on the top Dimension 90x155 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wg) Supply and installation of Timber frame double shutter casement window with semicircular fixed glazed frame on the top Dimension 90x155 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wh) Supply and installation of Timber frame double shutter casement window with rectangular fixed glazed frame on the bottom Dimension 145x190 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wi) Supply and installation of Timber frame double shutter casement window with semi- elliptical fixed glazed frame on the top, and a rectangular one on the bottom Dimension 145x190 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wl) Supply and installation of Timber frame single shutter casement window with rectangular fixed glazed frame on the bottom Dimension 70x190 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wm) QUANTITY UNIT no no 32 no 32 no no UNIT PRICE TOTAL PRICE ITEM NO 69 70 71 72 73 74 ITEM DESCRIPTION Supply and installation of Timber frame single shutter casement window with semi- circular fixed glazed frame on the top Dimension 70x190 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wn) Supply and installation of Timber frame four shutters casement window whereof the two lateral fixed Dimension 197x66 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wo) Supply and installation of Timber frame single shutter casement window Dimension 80x80 cm Sample should be approved Item includes all requirements for executing the work and complete finishes.(Wp) Supply and installation of Indoor Units Type MITSUBISHI mod PKFY-P25VBM-E or equivalent approved Sample should be approved Item includes all requirements for executing the work and complete finishes.(SP1) Supply and installation of Indoor Units Type MITSUBISHI mod PKFY-P40VBM-E or equivalent approved Sample should be approved Item includes all requirements for executing the work and complete finishes.(SP2) Supply and installation of Indoor Units Type MITSUBISHI mod QUANTITY UNIT no 56 no no 52 no 10 no no PLFY-P25VCM-E or equivalent approved Sample should be approved Item includes all requirements for executing the work and complete finishes.(SP3) Subtotal UNIT PRICE TOTAL PRICE ITEM NO 75 76 ITEM DESCRIPTION QUANTITY UNIT no no no no no Supply and installation of Indoor Units Type MITSUBISHI mod PEFY-P140VMH-E-F or equiv approved Sample should be approved Item includes all requirements for executing the work and complete finishes.(SP4) Supply and installation of Outdoor Units Type MITSUBISHI mod PUHY-P400YHM-A(BS) or equivalent approved Sample should be approved Item includes all requirements for executing the work and complete finishes (OU-GF1) 77 Supply and installation of Outdoor Units Type MITSUBISHI mod PUHY-P450YHM-A(BS) or equivalent approved Item includes all requirements for executing the work and complete finishes (OU-GF2) 78 Supply and installation of Outdoor Units Type MITSUBISHI mod PUHY-P400YHM-A(BS) or equivalent approved Item includes all requirements for executing the work and complete finishes (OU-FF1) 79 Supply and installation of Outdoor Units Type MITSUBISHI mod PUHY-P450YHM-A(BS) or equivalent approved Sample should be approved Item includes all requirements for executing the work and complete finishes (OU-FF2) Subtotal GRAND TOTAL Contractors authorized signature over printed name UNIT PRICE TOTAL PRICE ... advice of the supervisor engineer Contractors authorized signature over printed name BILL OF QUANTITIES FORM PROJECT TITLE : LOCATION : Subtotal QUANTITY. .. name UNIT m Number UNIT PRICE TOTAL PRICE BILL OF QUANTITIES FORM PROJECT TITLE : LOCATION : ITEM NO Subtotal ITEM DESCRIPTION QUANTITY UNIT SANITARY FIXTURES Flush tank... made of white satin matt glass and metal fitter Compact fluorescent lamps T16R · 55 + 60 W mod 8460 GLASHUTTE LIMBURG Subtotal QUANTITY 20 Unit UNIT PRICE TOTAL PRICE ITEM NO ITEM DESCRIPTION QUANTITY

Ngày đăng: 03/06/2018, 11:09

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan