Web server administration chap02

24 89 0
Web server administration chap02

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Web Server Administration Chapter Preparing For Server Installation Overview      Identify server categories Evaluate server components Plan for system disasters and reduce their effects Evaluate network components Set up IP addressing Identifying Server Categories-File Servers     File servers emphasize sending and receiving files A fast disk subsystem is more important than the processor type File servers are useful in a Web environment when you have a large number of static HTML pages File servers are also appropriate for an FTP server Identifying Server CategoriesApplication Servers Server applications can process requests     from many users at a time Requires extensive processing power A DBMS is a typical example Exchange Server does more than send email messages   Its complexity puts more burden on the processor Servers may also combine the need for fast processors and fast disk subsystems Evaluating Server ComponentsIntel Processors   Most common Intel processor is based on the 386 32-bit processors    Data is processed 32 bits at a time Uses CISC (Complex Instruction Set Computer) architecture Linux files often end in i386  These files can be used with all current PCs with the exception of the ones with the Itanium processor Evaluating Server ComponentsIntel Processors  Comparing processor speeds across processor versions can be deceiving  Each newer processor version is much more efficient at processing data at a given speed Processor RAM L2 cache Bus speed Pentium Dual Channel RDRAM; PC 133 SDRAM; DDR 200/266 SDRAM 512 K >400 MHz Pentium III Dual Channel DDR; Xeon SDRAM up to MB up to 400 MHz Celeron 128 K or 256 K up to 100 MHz SDRAM Evaluating Server ComponentsUltraSPARC Processors     Manufactured by Sun Only used in computers from Sun 64-bit processors Uses RISC (Reduced Instruction Set Computer) architecture Evaluating Server ComponentsUltraSPARC Processors Processor Relative speed Maximum L2 Maximum cache number of processors Bus speed UltraSPARC III Cu Fastest MB over 1000 150 MHz UltraSPARC II About 50% of III Cu MB 64 66 MHz UltraSPARC IIi About 50% of III Cu MB 66 MHz UltraSPARC IIe About 50% of III Cu 256 KB 66 MHz Evaluating Server ComponentsUsing Multiple Processors    BEA WebLogic can assign multiple server applications to a single processor in a multi-processor environment Processing a single application, such as a DBMS, spread over multiple processors is more common Applications have to be designed to take advantage of multiple processors Evaluating Server ComponentsSelecting a Hard Drive  IDE drives are less capable than SCSI Interface Limited ability to add drives SCSI can support many drives Ultra3, also known as Ultra160, is one of the most common interfaces used in servers  Manufactured by Adaptec    10 Evaluating Server ComponentsSelecting a NIC NIC Type Speed Media Use Standard Ethernet 10 Mbps Twisted pair (sometimes fiber) Workstations Fast Ethernet 100 Mbps Twisted pair (sometimes fiber) Workstations and small to medium servers Gigabit Ethernet 1,000 Mbps Fiber (sometimes twisted pair) High-end servers 10-Gigabit Ethernet 10,000 Mbps Fiber Backbone connections ATM 25 Mbps – 622+ Mbps Fiber Workstations and servers (rare) 11 Disaster Planning    Helps you avoid problems with hardware and software A challenge to balance costs with benefits In a server, the objective is fault tolerance  The ability of a system to keep running even when a component fails 12 Disaster Assessment and Recovery   Determine what can go wrong, what effects it will have on the organization, and what it will take to fix Hardware – determine what will happen if each component fails  How to replace failed hardware  How to restore software (if applicable)  Who will diagnose hardware problems 13 Disaster Assessment and Recovery    Software disasters are more complex than hardware disasters Could be a combination of application software and the operating system You may be directed to install software that may not work correctly   Document installation and problems in detail Make sure that support is available 14 System Redundancy   Often servers and switches have multiple power supplies so if one fails, the other(s) can take over In case the devices not have redundancy built in, try to have as much spare hardware on hand as appropriate for the number of devices, reliability, and cost  Also useful are warrantees that allow for replacement within 24 hours 15 Disk Redundancy through RAID  RAID     Data is duplicated across two drives Also called mirroring If there are two adapters, it is called duplexing RAID (most common)   Distributes data across a minimum of drives If any one of the drives fails, data can be recovered from the remaining drives 16 Achieving High Availability with Multiple Servers     Many computers act as one Can have ten’s of thousands of computers IBM uses computers in a cluster that serve different purposes Microsoft’s approach is to distribute the computing load among distinct servers 17 Setting Up Backup Systems   You should maintain a series of backups so you can restore data from a specific date Types of backup methods    Full – all data is backed up Differential – backs up all files that are new or changed since last full backup Incremental – backs up all files that are new or changed since the last incremental backup 18 Backup Considerations  Back up complete operating system   Back up special application files   On Windows systems, you have to make sure that the Registry is backed up DBMSs and Exchange keep files open, which cannot be backed up without special backup software modules Back up data files  Easy and straightforward unless user has files open 19 Evaluating Network Components    Hubs should be avoided in a server environment  Increased traffic slows communication Switches can come close to the appearance of a dedicated circuit between servers Routers connect one network to another 20 Setting Up IP Addressing   IP addresses are divided into the network portion and the host portion The subnet mask distinguishes the two portions 21 Common IP Classes Class First number Subnet mask Number of networks Number of hosts Class A – 127 255.0.0.0 126 >16,000,000 Class B 128 – 191 255.255.0.0 > 16,000 >65,000 Class C 192 – 223 255.255.255.0 > 2,000,000 254 22 Network Address Translation (NAT) NAT allows an IP address from one   network to be translated into another address on an internal network You can also use NAT to translate a single IP address valid on the Internet into multiple internal addresses  Useful if your ISP gives you a single IP address, yet you have multiple servers and users on the internal network 23 Summary      File servers and application servers are the two basic types of servers Various families of processors are available from Intel, Sun, and others There are many techniques for minimizing loss due to hardware and software failures Routers and switches allow servers to communicate IP addresses are divided into the network and host portions 24 ... you have a large number of static HTML pages File servers are also appropriate for an FTP server Identifying Server CategoriesApplication Servers Server applications can process requests    ... Identify server categories Evaluate server components Plan for system disasters and reduce their effects Evaluate network components Set up IP addressing Identifying Server Categories-File Servers... IP address, yet you have multiple servers and users on the internal network 23 Summary      File servers and application servers are the two basic types of servers Various families of processors

Ngày đăng: 22/02/2018, 14:50

Mục lục

  • Web Server Administration

  • Overview

  • Identifying Server Categories-File Servers

  • Identifying Server Categories- Application Servers

  • Evaluating Server Components- Intel Processors

  • Slide 6

  • Evaluating Server Components- UltraSPARC Processors

  • Slide 8

  • Evaluating Server Components- Using Multiple Processors

  • Evaluating Server Components- Selecting a Hard Drive Interface

  • Evaluating Server Components- Selecting a NIC

  • Disaster Planning

  • Disaster Assessment and Recovery

  • Slide 14

  • System Redundancy

  • Disk Redundancy through RAID

  • Achieving High Availability with Multiple Servers

  • Setting Up Backup Systems

  • Backup Considerations

  • Evaluating Network Components

  • Setting Up IP Addressing

  • Common IP Classes

  • Network Address Translation (NAT)

  • Summary

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan