... Figure 10 -3, we take the example in Figure 10 -1 and compute the pin-to-pin delays for each input/output path. Figure 10 -3. Pin-to-Pin Delay and #5 a1(e, a, b); and #7 a2(f, c, d); and #4 ... f; and a1(e, a, b); and a2(f, c, d); and #11 a3(out, e, f);//delay only on the output gate endmodule Lumped delays models are easy to model compared with distributed delays. 10 .1. 3 Pin-to-Pin ... in Figure 10 -2 and Example 10 -2.Figure 10 -2. Lumped Delay The above example is a modification of Figure 10 -1 . In this example, we computed the Pin-to-pin delays for standard parts can...