Lasers Applications in Science and Industry Part 5 pdf

... Principles and Applications, Springer-Verlag, ISBN 354 057 57 15 978 354 057 5719 Berlin Miller, J. C., Haglund, R.F. (Eds.) (1998) Laser Ablation and Desorption, Academic Press, ISBN 0124 759 750 ... Lasers – Applications in Science and Industry 82melting mT and vaporization fT points are 51 2 °C and 738 °C, respectively. It should be noted that fT is determined by the cross point ... 1089- 755 0 Lasers – Applications in Science and Industry 76the experimental and theoretical characterizations of the bumps are demonstrated. In the second part, we expand our work to intentionally...

Lasers Applications in Science and Industry Part 1 ppt

... Lasers – Applications in Science and Industry 8 temperature of the ZnSe crystals increases. In the case of pulse lasers, an increases in the transient temperature ΔT in materials ... Lasers – Applications in Science and Industry, Edited by Krzysztof Jakubczak p. cm. ISBN 978- 953 -307- 755 -0 Lasers – Applications in Science and Industry 10to the (100) LaAlO3 ... hexagonal and the orientation of each diffraction point is Lasers – Applications in Science and Industry Edited by Krzysztof Jakubczak Published by InTech Janeza Trdine 9, 51 000...

Lasers Applications in Science and Industry Part 2 pot

... 2006) pp. 55 61 -55 64, ISSN 0 957 -4484 Lasers – Applications in Science and Industry 26spots that are not uncommon in the cross section of high intensity laser beams. Fused silica and BK7 ... Science and Industry 284. Depositing high LIDT coatings at Sandia’s large optics coating operation Coating large optics goes hand in hand with large vacuum coating chambers. In Sandia’s ... Ripples Induced by Femtosecond Laser Pulses. Optics Express, Vol. 15, No.24, (November 2007) pp. 157 41- 157 46, ISSN 1094-4087 Lasers – Applications in Science and Industry 16 Fig. 15. Dot...

Lasers Applications in Science and Industry Part 3 pot

... coating design plays in obtaining coatings Lasers – Applications in Science and Industry 42 and this interference leads to intensity peaks well below the incident intensity except in the ... uniform Lasers – Applications in Science and Industry 50 Regarding polishing, washing and cleaning of an optic prior to coating it, we point out that residual amounts of the polishing compound ... meter-class laser optic in type of optical glass, in polishing compound and process, in washing and cleaning prior to coating, and in optical coating, including that both the test optic and the meter-class...

Lasers Applications in Science and Industry Part 4 docx

... coupling Lasers – Applications in Science and Industry 58 We observed that only AlN was detected in the films obtained with laser sources B and C, while films obtained with source A contain ... 67 30 35 40 45 50 55 60 -5 0 5 10 15 20 25 30 35 40Intensity (a.u.)2 (deg) Fig. 14. Tipical XRD pattern of SiC film obtained with shape 3 laser pulses (a) (b) (c) Fig. 15. SEM images ... by the pre-pulse causing their gradual boiling and elimination. Ultimately, the Lasers – Applications in Science and Industry 54 Pulse shaping introduces the method that makes possible the...

Lasers Applications in Science and Industry Part 6 pptx

... image quality while introducing a minor increase in the size of the object, all without changing the optical imaging parameters. Lasers – Applications in Science and Industry 961.2 Pulsed ... (1) w - grating period λ - desorbing laser wave length Part 2 Laser-Matter Interaction Lasers – Applications in Science and Industry 110 Fig. 1. Laser-matter interactions involve numerous ... (February 2001), pp. 6 85- 687, ISSN 0003-6 951 Lasers – Applications in Science and Industry 94θ - angle between one of the incident laser beams and the surface normal. Such grating formation can...

Lasers Applications in Science and Industry Part 7 docx

... (Fig. 5. 2). Fig. 5. 2. Photonic crystal fiber and supercontinuum spectrum. (Courtesy of Dr. Ping Ying and Dr. Zairu Ma) Lasers – Applications in Science and Industry 120 Fig. 3 .5. ... to induce ionization and the material cannot directly absorb incident laser of low intensity. Photo-ionization consists Lasers – Applications in Science and Industry 114 (a) Original ... with nonlinear Schrödinger equation[21]: Lasers – Applications in Science and Industry 130 [19] D. J. Jones, S. A. Diddams, J. K. Ranka, A. Stentz, R. S. Windeler, J. L. Hall, and S....

Lasers Applications in Science and Industry Part 8 ppt

... 24 ethanol 0.8 1.2 59 vacuum oil 0.9 23 7.5X10-9 Table 2. Material properties of liquid samples Lasers – Applications in Science and Industry 148 5. Summary and conclusion Present ... I.E. (2000), The initiation of fine grain pentaerythritol tetranitrate by laser-driven flyer plates, J. Appl. Phys. Vol. 88, pp. 65- Lasers – Applications in Science and Industry 140 ... treated in this chapter is the difference in refractive index of a transparent material from that of the adjacent medium. Lasers – Applications in Science and Industry 134 In this study,...

Lasers Applications in Science and Industry Part 9 docx

... manipulation of Au nanoparticles (Durston et al., 1998). Lasers – Applications in Science and Industry 156 between influences of shape and/ or size on extinction spectrum for instance. Another ... of metals in liquids. Eur. Phys. J. Appl. Phys., Vol. 30, pp. 107-112, ISSN 0021-8979 print / ISSN 1089- 755 0 online Lasers – Applications in Science and Industry 160 Fig. 5. SEM images ... Vol. 4, No. 7, pp. 359 1-36 05, ISSN 1936-0 851 print / ISSN 1936-086X online Lasers – Applications in Science and Industry 166 Au nanoparticles can be influenced by the type of an alcoholic...

Lasers Applications in Science and Industry Part 10 pptx

... DL708E). Lasers – Applications in Science and Industry 186 Fig. 18. Changes in rest potential after the re-activation of 2024 aluminum alloy in 0 .5 kmol m-3 H3BO3 - 0. 05 kmol m-3 ... increasing aspect ratio. 4. The repassivation ratio at 0.01 s after activation becomes lower with increasing aspect ratio. Lasers – Applications in Science and Industry 184 Fig. 15. ... 2024 aluminum alloy in 0 .5 kmol m-3 H3BO3 - 0. 05 kmol m-3 Na2B4O7 with 0 to 0.01 kmol m-3 NaCl. Lasers – Applications in Science and Industry 178 Fig. 7. Changes in the...

Xem thêm