RESEARCH, DESIGN AND FABRICATION OF DIGITAL INFORMATION TRANSIMITER WORKING IN THE VHF BAND

... is a binary signal having the same polarity as the input signal from the comparator at the time of the clock signal. The digital output signal is also the digital output of the encoder and is ... switching the other way (from the 30 percent pattern to the 0 percentpattern), the amplitude at the beginning of discharging is, at the first moment of switching,higher (by a factor of 16) than the ... modulating input to the PAM. The step-function response of the syllabic filter is related to the syllabic rate of speech, is independent of the sampling rate, and is exponential in nature. When the overload...

Báo cáo " Research, design and fabrication of a high-power combiner using Wilkinson bridge of L-band " pptx

... technique in the microwave technology. The design and simulink of the basic power moduls and Wilkinson bridge were performed using the ADS soflware. We have researched, designed and fabricated the ... simulink model. Afterthat we have measured the characteristics of the power combiner using the Winkinson bridge. The input amplitude from the generator was set at -10dB and was directed to the ... Wilkinson, power combination…. 1. Introduction The assemble of the L -band high-power amplifier is usually difficult, therefore the search for the power combination methods is important. The...

Báo cáo y học: " Safety and efficacy of undenatured type II collagen in the treatment of osteoarthritis of the knee: a clinical trial"

... including glucosamine and chondroitin, one month prior to study and during the study, other than multivitamin and mineral supplements containing vitamins and minerals as the sole medicinal ingredients ... heat/cold therapy, joint protection and physiotherapy/occupational therapy agrees to continue these therapies as normal avoiding changes in frequency or intensity and to record therapies in the study ... trial evaluated the safety and efficacy of UC-II as compared to a combination of glucosamine and chondroitin (G+C) in the treatment of OA of the knee. The results indicate that UC-II treatment...

Tài liệu PRINCIPLES AND PRACTICES OF ORGANIC LETTUCE SEED PRODUCTION IN THE PACIFIC NORTHWEST potx

... diversity during seed production. Therefore, the recommended minimum population size depends on the initial diversity in the variety. The following are guidelines based on the origin of the variety: ... shattering seed. The plant roots are placed off of the fabric to avoid soil contamination in the gathered seed. The plants are harvested with the roots in order to continue providing energy to the ... fungus. The symptoms of Sclerotinia rot are wilting of the lower leaves, followed by rotting of the base of the head. Sclerotinia can infect a field through a number of mechanisms. The first...

Real-Time Digital Signal Processing - Chapter 5: Design and Implementation of FIR Filters

... from the passband to the stopband, the window should have a small mainlobewidth. On the other hand, to reduce the passband and stopband ripples, the area under208 DESIGN AND IMPLEMENTATION OF ... coefficients of the desired filter exhibits an oscillatory behavior(or ripples) in its magnitude response. As the length of the filter is increased, the number of ripples in both passband and stopband increases, ... dB). In designing a lowpass filter, the Hamming window provides low ripple over the passband and good stopbandattenuation is usually more appropriate for FIR filter design than the Hanning window.Example...

Real-Time Digital Signal Processing - Chapter 6: Design and Implementation of IIR Filters

... is a mature and well-developed field, it isnot surprising that we begin the design of digital IIR filters in the analog domain and then convert the design into the digital domain. The problem ... Vmis the center frequency defined in (6.2.15) and BW is the bandwidth defined in (6.2.16).254 DESIGN AND IMPLEMENTATION OF IIR FILTERS6.3 Design of IIR Filters In this section, we discuss the design ... the bilinear transform. The procedure of designing digital filters using bilinear transform is illustrated in Figure 6.10. Instead of designing the digital filter directly, this method maps the...

The Design and Implementation of a Log-Structured File System

... LFSrecovery insures that the indexes point at the newest copy of the data in the log.Collecting data in the ﬁle cache and writing it to disk in large writes is similar to the concept of group commit in database ... Besides writing all changes in an append-only fashion, these systems maintain indexing information much like the Sprite LFS inode map and inodes for quickly locating and reading ﬁles. They differfrom ... (i-number for the directory and the positionwithin the directory), the contents of the directory entry(name and i-number), and the new reference count for the inode named in the entry. These records...

15
1,434
0

Simulation and Fabrication of Piezoelectric mems Inkjet Print head

... components such as ink chamber, channel and ink reservoir. In the case of inkjet heads, print resolution is one of the primary measures of product performance. When printing with inkjet heads, smaller, ... print head, one of the most important elements in an ink-jet printing system, is a combination of microfluidics and microfabrication (MEMS) and is used to eject small amounts of fluid on target ... convection. In order to combine the FEM and FVM solutions in the same integrated PIPH, the pressure at the support layer-fluid interface and the deformation at PZT-support layer interface and support...

Design and development of major balance of plant components in solid oxide fuel cell system

... pre-heat the fuel cell during warm-up. In addition to providing a heat source, the post-stack combustor also ensures the virtual elimination of all the residual hydrogen and CO remaining in the off-gases ... all of the fuel which enters the stack reacts with the cathode gas. In other words, the anode off-gas contains a certain amount of residual fuel. The components of the high-temperature anode off-gas ... 3. Design of SOFC BOP components The BOP components of a SOFC system account for between 50% and 70% of the total system cost. Due to the high operating temperature of SOFC, the material of...

Design and Implementation of a Three-Phase Induction Motor Control Scheme

... requirements of the degree of Bachelor of Engineering (Honours) in the division of Electrical Engineering, I present the following thesis entitled Design and Implementation of a Three-Phase Induction ... calculate the speed and position of the rotor. The encoder pulses and the measured currents drawn by the induction motor form the feedback portion of the design. Hence, the major aim of this thesis ... detected, the existing integer number in the free-running counter of the DSP controller is latched into a register that the software design can read (T2CNT). Therefore, if the software design...

Xem thêm